Simulation of chain length recognition observed in formation of inclusion complex

We carried out Brownian dynamics simulations to investigate the mechanism of chain length recognition observed in the formation of inclusion complexes (ICs) between cyclodextrins (CDs) and polymer chains. In our simulations, we used rings and chains as models to represent CDs and polymer chains, respectively. We used two types of chains with different lengths to determine which chain was preferred by the rings to form ICs. At low concentration of rings, we observed that almost all the rings formed ICs with the long chains. Chain length recognition could be reproduced in our simulation, and it occurred because of the difference in the inclusion time between the long chains and the short chains in the ICs. On the other hand, at high concentration of rings, the number of rings forming ICs with the long chains increased, and pseudo-polyrotaxanes (PPRXs) were formed. ICs were also formed with the short chains, because the inclusion time for each ring contained in the PPRXs reduced with an increase in the number of rings therein, and then, the dissociated rings formed ICs with the short chains. As a result, chain length recognition was not observed. From these results, we conclude that the difference in the inclusion time between the rings and the chains controls chain length recognition.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

Mercury oxidation by hydrochloric acid over TiO2 supported metal oxide catalysts in coal combustion flue gas

Mercury oxidation by hydrochloric acid over the metal oxides supported by anatase type TiO₂ catalysts, 1 wt.% MO_x/TiO₂ where M = V, Cr, Mn, Fe, Ni, Cu, and Mo, was investigated by the Hg⁰ oxidation and the NO reduction measurements both in the presence and absence of NH₃. The catalysts were characterized by BET surface area measurement and Raman spectroscopy. The metal oxides added to the catalyst were observed to disperse well on the TiO₂ surface. For all catalysts studied, the Hg⁰ oxidation by hydrochloric acid was confirmed to proceed. The activity of the catalysts was found to follow the trend MoO₃ ~ V₂O₅ > Cr₂O₃ > Mn₂O₃ > Fe₂O₃ > CuO > NiO. The Hg⁰ oxidation activity of all catalysts was depressed considerably by adding NH₃ to the reactant stream. This suggests that the metal oxide catalysts undergo the inhibition effect by NH₃. The activity trend of the Hg⁰ oxidation in the presence of NH₃ was different from that observed in its absence. A good correlation was found between the NO reduction and the Hg⁰ oxidation activities in the NH₃ present condition. The catalyst having high NO reduction activity such as V₂O₅/TiO₂ showed high Hg⁰ oxidation activity. The result obtained in this study suggests that the oxidation of Hg⁰ proceeds through the reaction mechanism, in which HCl competes for the active catalyst sites against NH₃. NH₃ adsorption may predominate over the adsorption of HCl in the presence of NH₃.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.     

Azimuthal wave number control of oscillatory thermocapillary convection in a liquid bridge

Thermocapillary convection in a half‐zone liquid bridge of high Prandtl number fluid is widely known to exhibit a three‐dimensional oscillatory flow after the onset of oscillation. The oscillatory flow presents ‘standing’ and ‘traveling’ flows depending upon the temperature difference between the top and bottom rods. In the oscillatory state, the flow shows a modal structure with an azimuthal wave number that depends on the aspect ratio of the liquid bridge and the intensity of the thermocapillarity expressed by the Marangoni number. The present study attempted to control the azimuthal wave number by heating the free surface locally with a prescribed frequency and intensity. The flow in the liquid bridge exhibited different modal structures depending on the heating conditions and a relationship between the frequency and the modal structure was obtained. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 460–469, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20086     

A quantitative analysis of a trace amount of hydrogen in high temperature heat-treated carbons

A technique to determine a trace amount of hydrogen in carbon materials heat-treated above 1000 °C was developed. Three types of carbons prepared from poly(furfulyl alcohol), poly(vinyl chloride) and mesophase carbon microbeads were heat-treated at various temperatures ranging from 1000 to 1800 °C. Then they were gasified by O₂ in a fixed bed flow reactor, and the H₂O gases formed during the gasification processes were carefully monitored with a Karl Fischer moisture analyzer. As a result, this method makes it possible to determine the hydrogen contents in the carbons down to three places of decimals as a weight percent and can detect even a trace amount of hydrogen as low as 0.002 wt.%. A possible chemical structure of carbon edge sites was also discussed based on the experimentally determined hydrogen contents.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

PEI-assisted preparation of Au nanoparticles via reductive crystallization process

Nano-sized gold particles were prepared in a solution containing polyethylenimine (PEI) utilizing a batch reactor. PEI acts as a reducing agent as well as a stabilizing agent of nanoparticles. The effects of initial concentration of PEI on the mean particle diameter, coefficient of variation (C.V.), growth rate, nucleation rate and the number of nuclei were studied. The particle diameter of gold decreased markedly with increasing initial concentration of PEI, from 3.3 μm to a minimum value of about 5 nm. The observed decrease of particle diameter was considered to be caused by the growth-inhibiting effect of PEI, which affects the conclusive number of nuclei.