A cell transistor scalable DRAM array architecture

Presents a new DRAM array architecture for scaled DRAMs. This scheme suppresses the stress bias for memory cell transistors and enables memory cell transistor scaling. In this scheme, the data "1" and data "0" are written to the memory cell in different timing. First, for all selected cells, data "1" is written by boosting wordline (WL) voltage. Second, after pulling down WL voltage to a lowered value, data "0" is written only for data "0" cells. This scheme reduces stress bias for the cell transistor to half of that of the conventional operation. The time loss for data "1" write is eliminated by parallel processing of data "1" write and sense amplifier activation. This scheme realizes fast cycle time of 50 ns. By adopting the proposed scheme, the gate-oxide thickness of the cell transistor is reduced from 5.5 to 3 nm, and the memory cell size is reduced to 87% in 0.13-μm DRAM generation. Moreover, the application of the oxide-stress relaxation technique to all row-path circuits as well as the proposed scheme enables high-performance DRAM with only a thin gate-oxide transistor     

Subscriber optical fiber cable transfer splicing system usingmechanically transferable connectors

An optical fiber cable transfer splicing system is developed for use in removing or changing optical fiber cables. The system enables rapid transfer from existing optical fiber cables to newly installed ones. The transfer is carried out synchronously using two mechanically transferable connectors which terminate the optical fiber cables at two different points, such as manholes. Before the transfer splicing, the system identifies a fiber ribbon in order to avoid mistransfer. A transfer time of less than 30 ms was achieved. The fiber ribbon was identified with a loss, from an identification light source to an identification point, of 35.5 dB. With this system, cable transfer can be faultlessly carried out with only a slight interruption to working transmission systems and circuit quality degradation is suppressed     

Identification system for optical fiber transmission operationlines with local-light injection and detection coupling system

An identification system using a local-light injection and detection coupling system is developed. The relation of bending fiber radius to both local-light injection and detection coupling efficiencies is shown. This system can be used for distances of up to 21 km at a bending radius R=7 mm. Also, the line number in the fiber ribbon, can be confirmed and transfer splicing loss can be estimated using this identification system     

Influences of nonuniformity in metal concentration in gate dielectric silicate on CMIS inverters'' propagation delay time

It is shown that propagation delay time in CMIS (complementary metal insulator semiconductor field effect transistor) inverters is strongly affected by dielectric constant nonuniformity in gate dielectrics caused by the phase separation in silicate films. Influences of such nonuniformity on load capacitance are studied by analytical calculations based on a physical model which takes polarization into account. It is newly found that load capacitances are affected by the phase separation in qualitatively different ways, depending on the average metal concentration of their dielectric films. An experimental result is compared with those calculations. Influences of such nonuniformity on current drivability are studied by 3-dimensional device simulations. It is also newly found that such nonuniformity affects load capacitance and current drivability in different ways, resulting in an increase in propagation delay time of CMIS inverters for all metal concentrations studied. An explanation of this phenomenon is given with physical considerations.     

A new concept of nuclear fuel reprocessing by applying ion-exchange technology

The development of advanced technology for the spent nuclear fuel reprocessing should be achieved not only considering cost, non proliferation and reduction of radioactive wastes but also corresponding to both spent nuclear fuels of LWR and FBR.

We have proposed an ion exchange process for reprocessing using a new type ion exchanger developed to chemical method of U enrichment technology. This process possess possibility of a sharp cut in cost, since this ion exchanger is characterized by rapid adsorption-desorption rate dominating the treatment rate.

From the basic experimental results, this reprocessing process has been constructed by 3 ion exchanger columns which consist of a main separation column, the uranium-refining column and the plutonium-refining column.

Comparing ion exchange process with the conventional Purex process, this ion exchange process has many advantages such as the decrease in the number and size separation equipment, solvent-spent free and alkaline-liquid-spent free. With these advantages, this process is estimated that the construction cost of reprocessing process is greatly reduced comparing to the conventional process.     

Index for predicting post-operative residual liver function by pre-operative dynamic liver SPET

To predict residual liver function before hepatic resection, we devised a predictive index by combining clearance values with functional liver volume measured by liver dynamic single photon emission tomography (SPET). Forty-seven patients with liver disease underwent liver dynamic SPET with 99Tcm-Sn colloid before hepatic resection. There were no operation-related deaths. Three patients died from hepatic failure more than 1 month following the operation. Their predictive indices were 0.24, 0.33 and 0.34. When the predictive index was above 0.35, no patient had symptoms of hepatic failure or died. Our data suggest that when the predictive index is above 0.35, there is a low probability of hepatic failure after hepatectomy.     

Blood platelets in severely injured burned patients

Unbelievable decrease of blood-platelet in the severely burned patients during the treatment of skingrafting caused two patients to unexpected death. From the records of changes of platelet number, a certain 'platelet curve' was made. By observing the curve, our treatments of skingrafting were carried out during the stable period and from then on we had no death cases.