Crack initiation model for sensitized 304 stainless steel in high temperature water

To investigate the initiation behavior of stress corrosion cracking (SCC) for sensitized Type 304 stainless steel in high temperature water, a constant load SCC test method combined with in situ crack observation technique was employed. The in situ crack observation system allowed us to detect small cracks of at least 100 μm. As a result, a fracture time decreased with an increase in an applied stress. The first cracks were observed at most 3 h before the specimen was fractured under all the stress conditions. After that, many cracks were initiated in a short time to fracture. The fracture was caused by coalescence of multiple cracks rather than by growth of some primary cracks. The simulation model for surface crack initiation was newly developed using a Monte Carlo method, which was based on damage mechanics and stress analysis around the existing cracks. The simulation could represent the empirical results of changes in the crack distribution and the cumulative number of cracks during the SCC tests. It was concluded, therefore, that the crack initiation process should be considered in simulating the life prediction of the material in this SCC system.     

Relationship of occupation to blood pressure among middle-aged Japanese men--the significance of the differences in body mass index and alcohol consumption

To clarify how and why blood pressure differs between occupations, the proportions of hypertensives, and the measures of blood pressure, body mass index (BMI) and alcohol consumption among the individuals not taking antihypertensive drugs were compared between the eight occupational categories using the data from a health check-up for 589 middle-aged Japanese males, mostly randomly selected from five areas in Japan. After adjusting for age, the relationships of occupation to the proportion of hypertensives and the mean systolic and diastolic blood pressure substantially differed among the five areas. However, after further adjustment for residence, these blood pressure levels (the proportion of hypertensives, and the mean systolic and diastolic blood pressure) were found to be higher for the "Personnel in transport and communications", the "Clerical personnel", the "Managerial and civil personnel" and the "Professional and technical personnel", whereas these values were consistently lowest in the "Service personnel". Age and residence-adjusted mean BMI was also higher for the four occupational categories with the increased blood pressure levels. According to a weighted multiple regression analysis across the eight occupations, the age and residence-adjusted mean BMI was a significant predictor of the age and residence-adjusted mean systolic and diastolic blood pressure (p = 0.068 and 0.018, respectively). These results suggest that the occupation-related changes in BMI may largely contribute to the occupation-related changes in blood pressure.     

Temperature-controlled molecular dynamics study on velocity-dependent threshold behavior of dynamic nano-friction

Laws of dynamic nano-friction (i.e., continuous wearless friction) were searched for under steady spatial distributions of the local quasi-temperature, by molecular dynamics (MD) simulations. The temperature control of the non-conservative model was carried out by extending the isothermal MD method using the Nosé–Poincaré thermostat. The results suggested that the threshold phenomenon characterizes sliding-velocity dependence of the nano-frictional force between crystal lattices constituting a nano-electromechanical system (NEMS). This phenomenon was turned out to be a universal feature, whether heat transfer to the environment exists or not.     

Degree of radiance and polarization of the upwelling radiation from an atmosphere-ocean system

The radiance and degree of linear polarization of the upward radiation emerging from the top of the terrestrial atmosphere bounded by a ruffled ocean surface are computed in the wavelength region ranging from 0.40 to 0.80 microm with the aid of the adding method. The ruffled ocean surface is treated as an interacting interface, where the radiation transmitted diffusely from below the ocean surface into the atmosphere is also taken into account. Computational results show that the simultaneous measurement of radiance and polarization degree from space makes it possible to derive atmospheric and oceanic parameters.     

Gradually intractable problems and nondeterministic log-space lower bounds

The paper places five different problems (thek-pebble game problem, two problems aboutk finite automata, the reachability problem for Petri nets withk tokens, and the teachability problem for graphs whose k-dimensional edge sets are described by Cartesian products ofk factors) into the hierarchyNL _k of problems solvable by nondeterministic Turing machines ink-log₂ n space (and binary tape alphabet, to avoid tape speed-up). The results, when combined with the conjecture thatNL _i contains problems that requireO(n ^k ) deterministic time, show that these problems, while inP for every fixed value ofk, have polynomial deterministic time complexities with the degree of the polynomial growing linearly with the parameterk, and hence are, in this sense, gradually intractable.     

Construction of a brain–machine hybrid system to evaluate adaptability of an insect

Insects perform adaptive behavior according to changing environmental conditions using comparatively small brains. Because adaptability is generated through the relationship among brain, body and environment, it is necessary to examine how a brain works under these conditions. In this study, to understand neural processing involved in adaptive behavior, we constructed a brain–machine hybrid system using motor signals related to the steering behavior of the male silkworm moth for controlling a two-wheeled mobile robot. We developed this hybrid system according to the following steps. (1) We selected steering signals corresponding to walking direction that were activated during neck swinging induced by optic flow and pheromone stimuli. (2) To control a robot by neural activity, we implemented a spike-behavior conversion rule such that frequency of the left and right neck motor neurons’ spikes was linearly converted into rotation of the wheels. (3) For electrophysiological multi-unit recordings on a robot, we developed small amplifiers. Using this hybrid system, we could observe the programmed behavioral pattern and orientation toward a pheromone source. Moreover, we compared the orientation behavior of moths and that of the hybrid system at different pheromone stimulus frequencies. From these experiments, we concluded that we could reconstruct silkworm moth behavior on the hybrid system.     

LaBGeO5 single crystals in glass and second-harmonic generation

Flower-shaped crystals with diameters of 100–200 μm consisting of LaBGeO₅ (LBGO) single crystals similar to petals were observed in the interior of transparent LBGO surface-crystallized glasses. Each flower-shaped crystal was radially grown from the surface of the included bubbles. A more intense second-harmonic generation was observed from the LBGO crystallized glasses with the flower-shaped LBGO single crystals compared to the samples without such crystals based on the Maker fringe technique and second-harmonic (SH) generation microscopy. The SH intensity for the flower-shaped LBGO single crystals monotonically decreased with increasing temperature up to 350 °C, less than the Curie temperature reported so far (530 °C). It is considered that the internal compressive stress induced by the difference in the thermal expansion between the LBGO single crystal and the corresponding glass affect the ferroelectric property of the flower-shaped LBGO single crystals in glass.     

The Atmospheric Scanning Electron Microscope with open sample space observes dynamic phenomena in liquid or gas

Although conventional electron microscopy (EM) requires samples to be in vacuum, most chemical and physical reactions occur in liquid or gas. The Atmospheric Scanning Electron Microscope (ASEM) can observe dynamic phenomena in liquid or gas under atmospheric pressure in real time. An electron-permeable window made of pressure-resistant 100 nm-thick silicon nitride (SiN) film, set into the bottom of the open ASEM sample dish, allows an electron beam to be projected from underneath the sample. A detector positioned below captures backscattered electrons. Using the ASEM, we observed the radiation-induced self-organization process of particles, as well as phenomena accompanying volume change, including evaporation-induced crystallization. Using the electrochemical ASEM dish, we observed tree-like electrochemical depositions on the cathode. In silver nitrate solution, we observed silver depositions near the cathode forming incidental internal voids. The heated ASEM dish allowed observation of patterns of contrast in melting and solidifying solder. Finally, to demonstrate its applicability for monitoring and control of industrial processes, silver paste and solder paste were examined at high throughput. High resolution, imaging speed, flexibility, adaptability, and ease of use facilitate the observation of previously difficult-to-image phenomena, and make the ASEM applicable to various fields.     

Non‐Toxic Dry‐Coated Nanosilver for Plasmonic Biosensors

The plasmonic properties of noble metals facilitate their use for in vivo bio‐applications such as targeted drug delivery and cancer cell therapy. Nanosilver is best suited for such applications as it has the lowest plasmonic losses among all such materials in the UV‐visible spectrum. Its toxicity, however, can destroy surrounding healthy tissues and thus, hinders its safe use. Here, that toxicity against a model biological system (Escherichia coli) is “cured” or blocked by coating nanosilver hermetically with a about 2 nm thin SiO₂ layer in one‐step by a scalable flame aerosol method followed by swirl injection of a silica precursor vapor (hexamethyldisiloxane) without reducing the plasmonic performance of the enclosed or encapsulated silver nanoparticles (20–40 nm in diameter as determined by X‐ray diffraction and microscopy). This creates the opportunity to safely use powerful nanosilver for intracellular bio‐applications. The label‐free biosensing and surface bio‐functionalization of these ready‐to‐use, non‐toxic (benign) Ag nanoparticles is presented by measuring the adsorption of bovine serum albumin (BSA) in a model sensing experiment. Furthermore, the silica coating around nanosilver prevents its agglomeration or flocculation (as determined by thermal annealing, optical absorption spectroscopy and microscopy) and thus, enhances its biosensitivity, including bioimaging as determined by dark field illumination.     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.