A PSS‐Free PEDOT Conductive Film Supported by a Hierarchical Nanoporous Layer Glass

The importance of transparent conductive film is increasing due to its use in applications such as touch‐panel devices. Although indium tin oxide is widely used because of its high conductivity and transparency, conductive polymers are being studied as alternative materials that avoid the use of rare metals and the brittleness associated with existing systems. Polyethylene dioxythiophene (PEDOT)/polyethylene sulfonic acid (PSS) is drawing a lot of attention due to its well‐balanced conductivity, transparency, film formability, and chemical stability. The nonconductive PSS reportedly covers the conductive PEDOT. The PSS shell provides carrier and film‐formability to PEDOT but is also a barrier that hinders electrical conductivity. Therefore, the PEDOT film formability is explored supported by a substrate without the addition of PSS. The “hierarchical nanoporous layer glass” holds the PSS‐free PEDOT with its nanopores to form a homogeneous, transparent film. The PSS‐free PEDOT film thus achieves transparency of over 85% and resistivity of below 500 Ω sq^?1.     

Syntheses of group 4 transition metal complexes bearing 2-pyridinethiolate ligands and their catalytic activities for ethylene polymerization

Titanium bis(2-pyridinethiolate) complexes, Ti(6-R-SPy)₂(NMe₂)₂ (6-R-SPy = 6-R-2-pyridinethiolate, 3a: R = H; 3b: R = Me; 3c: R = Ph; 3d: R = C₆H₄-4-Me; 3e: R = C₆H₄-4-t-Bu; 3f: R = C₆H₃-3,5-Me₂), and the titanium bis(2-pyridinolate) complexes, Ti(6-Ph-OPy)₂(NMe₂)₂ (6-Ph-OPy = 6-phenyl-2-pyridinolate, 8) were prepared by treating Ti(NMe₂)₄ with 2 equiv. of 6-R-2-pyridinethiol or 6-Ph-2-pyridinol. The cis-configuration of the diamido moieties in the pseudo octahedral geometry was elucidated by X-ray crystallography for 3a. Reaction of M(NMe₂)₄ (M = Ti, Zr) with 4 equiv. of 2-pyridinethiol cleanly gave tetrakis(pyridinethiolate) complexes, M(6-H-SPy)₄·THF (6: M = Ti; 7: M = Zr). The triangular dodecahedral geometries of 6 and 7 were also revealed by X-ray crystallography. These complexes catalyzed ethylene polymerization upon activation with MAO (methylaluminoxane) or MMAO (modified MAO). The catalytic activities of titanium bis(6-aryl-pyridinethiolate) systems were found to be remarkably higher than that of titanium bis(6-methyl-pyridinethiolate) system. Among the complexes synthesized in this study, Ti[6-(C₆H₃-3,5-Me₂)-SPy]₂(NMe₂)₂ (3f)/MMAO showed the highest activity (1200 kg/Ti-mol h atm) for ethylene polymerization at 60 °C under atmospheric pressure. In contrast, the activity of the corresponding 6-aryl-pyridinolate system 8/MMAO was rather low (9.3 kg/Ti-mol h atm). Both the N-S chelating structure and the bulky aryl substituents are essential for the high activities of the 6-aryl-pyridinethiolate complexes.     

Non‐Toxic Dry‐Coated Nanosilver for Plasmonic Biosensors

The plasmonic properties of noble metals facilitate their use for in vivo bio‐applications such as targeted drug delivery and cancer cell therapy. Nanosilver is best suited for such applications as it has the lowest plasmonic losses among all such materials in the UV‐visible spectrum. Its toxicity, however, can destroy surrounding healthy tissues and thus, hinders its safe use. Here, that toxicity against a model biological system (Escherichia coli) is “cured” or blocked by coating nanosilver hermetically with a about 2 nm thin SiO₂ layer in one‐step by a scalable flame aerosol method followed by swirl injection of a silica precursor vapor (hexamethyldisiloxane) without reducing the plasmonic performance of the enclosed or encapsulated silver nanoparticles (20–40 nm in diameter as determined by X‐ray diffraction and microscopy). This creates the opportunity to safely use powerful nanosilver for intracellular bio‐applications. The label‐free biosensing and surface bio‐functionalization of these ready‐to‐use, non‐toxic (benign) Ag nanoparticles is presented by measuring the adsorption of bovine serum albumin (BSA) in a model sensing experiment. Furthermore, the silica coating around nanosilver prevents its agglomeration or flocculation (as determined by thermal annealing, optical absorption spectroscopy and microscopy) and thus, enhances its biosensitivity, including bioimaging as determined by dark field illumination.     

Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

A highly repetitive sequence isolated from genomic DNA of the medaka (Oryzias latipes)

In order to investigate the relationship between various temporomandibular joint (TMJ) pain levels and the detection of high signal intensity (joint effusion) on T2 weighted magnetic resonance imaging (MRI), 19 consecutive patients who complained of unilateral painful TMJ hypomobility (closed locking) were involved in this study. All patients were clinically examined in a routine manner, and all patients rated their pain levels by a visual analogue scale and eight pain questionnaire prior MRI study. T1 and T2 weighted MRI was taken in sagittal section at unilateral affected joint side. The presence or absence of a high signal intensity spot within the TMJ compartment were judged by three examiners. The high signal intensity was detected in 10 joints, but not in 9 joints. In between these two groups, the pain ratio was calculated and compared. The data showed that there was no significant statistical correlation between pain levels and the presence of high signals. This study disclosed that the MRI detection of high signal intensity in the closed locking TMJ did not directly relate to the presence of TMJ pain nor the increased pain level. These indicate the need of further larger studies.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

High-transfer-rate high-capacity holographic disk data-storage system

We describe the design and implementation of a high-data-rate high-capacity digital holographic storage disk system. Various system design trade-offs that affect density and data-rate performance are described and analyzed. In the demonstration system that we describe, high-density holographic recording is achieved by use of high-resolution short-focal-length optics and correlation shift multiplexing in photopolymer disk media. Holographic channel decoding at a 1-Gbit/s data rate is performed by custom-built electronic hardware. A benchmark sustained optical data-transfer rate of 10 Gbits/s has been successfully demonstrated.     

A Novel KCaNi/α-Al2O3 Catalyst for CH4 Reforming with CO2

A potassium and calcium co-promoted nickel catalyst (KCaNi/-Al₂O₃) prepared by a direct impregnation method possessed a high activity, high stability and excellent coke resistance properties in CH₄ reforming with CO₂. XRD, XPS and H₂-TPR characterizations indicated that (i) Ca and K strengthened the interaction between Ni and -Al₂O₃ and promoted the formation of a unique NiAl₂O₄ phase on the surface of the catalyst and (ii) Ca and K increased the dispersion of Ni and retarded its sintering. Coking reactions (CH₄ temperature-programmed decomposition and O₂-TPO) disclosed that K reduced carbon formation via CH₄ decomposition.