Influences of nonuniformity in metal concentration in gate dielectric silicate on CMIS inverters'' propagation delay time

It is shown that propagation delay time in CMIS (complementary metal insulator semiconductor field effect transistor) inverters is strongly affected by dielectric constant nonuniformity in gate dielectrics caused by the phase separation in silicate films. Influences of such nonuniformity on load capacitance are studied by analytical calculations based on a physical model which takes polarization into account. It is newly found that load capacitances are affected by the phase separation in qualitatively different ways, depending on the average metal concentration of their dielectric films. An experimental result is compared with those calculations. Influences of such nonuniformity on current drivability are studied by 3-dimensional device simulations. It is also newly found that such nonuniformity affects load capacitance and current drivability in different ways, resulting in an increase in propagation delay time of CMIS inverters for all metal concentrations studied. An explanation of this phenomenon is given with physical considerations.     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

A new concept of nuclear fuel reprocessing by applying ion-exchange technology

The development of advanced technology for the spent nuclear fuel reprocessing should be achieved not only considering cost, non proliferation and reduction of radioactive wastes but also corresponding to both spent nuclear fuels of LWR and FBR.

We have proposed an ion exchange process for reprocessing using a new type ion exchanger developed to chemical method of U enrichment technology. This process possess possibility of a sharp cut in cost, since this ion exchanger is characterized by rapid adsorption-desorption rate dominating the treatment rate.

From the basic experimental results, this reprocessing process has been constructed by 3 ion exchanger columns which consist of a main separation column, the uranium-refining column and the plutonium-refining column.

Comparing ion exchange process with the conventional Purex process, this ion exchange process has many advantages such as the decrease in the number and size separation equipment, solvent-spent free and alkaline-liquid-spent free. With these advantages, this process is estimated that the construction cost of reprocessing process is greatly reduced comparing to the conventional process.     

Tetrahydropyranyl- and furanyl-protected polyhydroxystyrene in chemical amplification systems

Tetrahydropyranyl- (THP) and furanyl- (THF) protected polyhydroxystyrene (PHS) polymers have been investigated for their potential use in conjunction with onium salt acid precursors to yield high-sensitivity resist systems. The synthesized polymers have high transmittance at 248 nm (the wavelength used in next-generation excimer laser, KrF exposure tools). At 248 nm the transmittance for a 1-μm thick film is ～ 80% (Abs = 0.097 μm^?1). The acid sensitivity of the acetal functionality at room temperature is high, requiring careful handling of all materials to prevent any premature deprotection of the hydroxy group. The highest lithographic sensitivities obtained so far with a system consisting of poly(p-tetrahydropyranyl-oxy-styrene) base resin and 1 mol % of bis (p-tert-butyl phenyl) iodinium triflate (TBIT) was ～ 2 mJ / cm². High-resolution line and space patterns (0.35 μm) were obtained with a system comprising PHS-p-THP and an acid precursor, using an excimer laser step and repeat exposure at 248 nm.     

Index for predicting post-operative residual liver function by pre-operative dynamic liver SPET

To predict residual liver function before hepatic resection, we devised a predictive index by combining clearance values with functional liver volume measured by liver dynamic single photon emission tomography (SPET). Forty-seven patients with liver disease underwent liver dynamic SPET with 99Tcm-Sn colloid before hepatic resection. There were no operation-related deaths. Three patients died from hepatic failure more than 1 month following the operation. Their predictive indices were 0.24, 0.33 and 0.34. When the predictive index was above 0.35, no patient had symptoms of hepatic failure or died. Our data suggest that when the predictive index is above 0.35, there is a low probability of hepatic failure after hepatectomy.     

Blood platelets in severely injured burned patients

Unbelievable decrease of blood-platelet in the severely burned patients during the treatment of skingrafting caused two patients to unexpected death. From the records of changes of platelet number, a certain 'platelet curve' was made. By observing the curve, our treatments of skingrafting were carried out during the stable period and from then on we had no death cases.     

Development of the computerized dental cast form analyzing system--three dimensional diagnosis of dental arch form and the investigation of measuring condition

To analyze the functional and morphological harmonies of the tooth and dental arch, a computerized system to measure a dental cast and to detect the apex of dental cusps and angle points of incisors was developed. Detailed morphology in the measured dental cast could be displayed distinctively by computer graphics (CG) with a surface model. Accuracy in determining the position of the apex of the dental cusp was examined by increasing the measuring pitch from 50 microns to 400 microns, the error increased gradually with increased measuring pitch. Taking the measuring error, the time for measurement and the memory size for analysis into account, a measuring pitch of 200 microns was determined to be reasonable. Three-dimensional data measurements from the apex of the dental cusp in molar, and the mesial and distal angles in canine and incisor were fitted to a polynomial formula. In the present measured model, the 4th order polynomial formula was used for the dental arch, and the 2nd order polynomial formula was used for the anteroposterior and lateral occlusal curves. These formulae could be simultaneously superimposed on the surface model of the dental cast, and displayed using CG.