In Vivo Electrophysiology of Peptidergic Neurons in Deep Layers of the Lumbar Spinal Cord after Optogenetic Stimulation of Hypothalamic Paraventricular Oxytocin Neurons in Rats

The spinal ejaculation generator (SEG) is located in the central gray (lamina X) of the rat lumbar spinal cord and plays a pivotal role in the ejaculatory reflex. We recently reported that SEG neurons express the oxytocin receptor and are activated by oxytocin projections from the paraventricular nucleus of hypothalamus (PVH). However, it is unknown whether the SEG responds to oxytocin in vivo. In this study, we analyzed the characteristics of the brain–spinal cord neural circuit that controls male sexual function using a newly developed in vivo electrophysiological technique. Optogenetic stimulation of the PVH of rats expressing channel rhodopsin under the oxytocin receptor promoter increased the spontaneous firing of most lamina X SEG neurons. This is the first demonstration of the in vivo electrical response from the deeper (lamina X) neurons in the spinal cord. Furthermore, we succeeded in the in vivo whole-cell recordings of lamina X neurons. In vivo whole-cell recordings may reveal the features of lamina X SEG neurons, including differences in neurotransmitters and response to stimulation. Taken together, these results suggest that in vivo electrophysiological stimulation can elucidate the neurophysiological response of a variety of spinal neurons during male sexual behavior.     

Adaptation to climate change and conservation of biodiversity using green infrastructure

In recent years, we have experienced mega‐flood disasters in Japan due to climate change. In the last century, we have been building disaster prevention infrastructure (artificial levees and dams, referred to as “grey infrastructure”) to protect human lives and assets from floods, but these hard protective measures will not function against mega‐floods. Moreover, in a drastically depopulating society such as that in Japan, farmland abandonment prevails, and it will be more difficult to maintain grey infrastructure with a limited tax income. In this study, we propose the introduction of green infrastructure (GI) as an adaptation strategy for climate change. If we can use abandoned farmlands as GI, they may function to reduce disaster risks and provide habitats for various organisms that are adapted to wetland environments. First, we present a conceptual framework for disaster prevention using a hybrid of GI and conventional grey infrastructure. In this combination, the fundamental GI, composed of forests and wetlands in the catchment (GI‐1) and additional multilevel GIs such as flood control basins that function when floodwater exceeds the planning level (GI‐2) are introduced. We evaluated the flood attenuation function (GI‐1) of the Kushiro Wetland using a hydrological model and developed a methodology for selecting suitable locations of GI‐2, considering flood risk, biodiversity and the distribution of abandoned farmlands, which represent social and economic costs. The results indicated that the Kushiro Wetland acts as a large natural reservoir that attenuates the hydrological peak discharge during floods and suitable locations for introducing GI‐2 are concentrated in floodplain areas developing in the downstream reaches of large rivers. Finally, we discussed the network structure of GI‐1 as a hub and GI‐2 as a dispersal site for conservation of the Red‐crowned Crane, one of the symbolic species of Japan.     

Filter-based energy-resolved X-ray computed tomography with a clinical imager

Filter-based energy-resolved X-ray computed tomography (CT) is an approach for implementing energy-resolved CT imaging using a flat-panel-detector-based cone-beam system. In this study, we performed experiments with a 20-cm-diameter phantom on a clinical X-ray imager. The material density results showed good agreement with the ideal values. We also propose an improved method for obtaining the detector response function and the X-ray spectrum, which requires fewer measurements and will be practical for future clinical use. Issues such as scatter and image noise remain to be addressed.     

Investigation of high-temperature chemical interaction of calcium silicate insulation and cesium hydroxide

ABSTRACT

The interaction of cesium hydroxide and a calcium silicate insulation material was experimentally investigated at high-temperature conditions to evaluate the possibility of unprecedented cesium retention under severe accident of boiling water reactor. The temperature where the interactions occurred and chemical species of cesium after the interaction were examined in this study. A thermogravimetry equipped with differential thermal analysis was used to analyze thermal events in the samples of mixed calcium silicate and cesium hydroxide under oxidizing and reducing atmospheric conditions with a maximum temperature of 1100°C. Before being mixed with cesium hydroxide, a part of calcium silicate was pretreated at high temperature to evaluate the effect of possible structural changes of this material due to a preceding thermal history and also for the sake of thermodynamic evaluation. It was found that for the original material, as xonotlite (Ca₆Si₆O₁₇(OH)₂) crystal, the endothermic reaction with cesium hydroxide occurred over the temperature range 575–730°C; meanwhile, for heat-treated material, which varied the crystal phase of original material to wollastonite (CaSiO₃), the interaction occurred over the temperature range 700–1100°C. The X-ray diffraction analyses have indicated that both types of calcium silicates regardless of the atmospheric conditions, cesium aluminum silicate, CsAlSiO₄, was formed with aluminum in the samples as an impurity or adduct. The insolubility of this formed cesium suggested the potency of cesium localization in the primary containment vessels on other structural materials that possess similar elements to that of calcium silicate insulation; hence, an effective decommissioning process could be developed.     

Dosimeter properties of CaO transparent ceramic prepared by the SPS method

We have studied photoluminescence (PL), scintillation and thermally-stimulated luminescence (TSL) dosimeter properties of CaO transparent ceramic, in comparison with those of MgO transparent ceramic as a reference. Both samples were made by a Spark Plasma Sintering method. In the PL spectra, both samples showed emission peaks due to F and F⁺ centers. Moreover, in addition to these peaks, a scintillation emission peak was detected at 330 nm for both CaO and MgO, which was caused by surface defects. The TSL glow curves showed a main peak around 55 °C for CaO and 140 °C for MgO. The TSL response was confirmed to monotonically increase with irradiation dose over the dose range from 0.1 to 1000 mGy.     

EXAFS and FTIR characterization of tetrarhodium carbonyl clusters attached on tris-(hydroxymethyl)phosphine grafted silica catalytically active for olefin hydroformylation

A series of perovskites of the formula Ca_1–x Sr _x Ti_1–y M _y O_3–, M=Fe, Co, Cr or Ni,x = 0–1,y = 0–0.6, has been synthesized by a modified sol-gel method using citrate. Several of these materials were proved to be stable under operating conditions in reducing atmospheres of air and hydrocarbons. An outline of the synthesis procedure is given, together with the results of XRD, SEM, BET, TG, DTA and IR characterization before and after catalytic testing. The solubility of Ni and Cr in this perovskite was very limited, and the solubility of Co decreased abruptly above 1173 K. The solubility range of Ca and Sr on alkaline earth sites is 100%.     

Crystalline Phases and YAG Laser-Induced Crystallization in Sm2O3–Bi2O3–B2O3 Glasses

The glass formation region, crystalline phases, second harmonic (SH) generation, and Nd:yttrium aluminum garnet (YAG) laser-induced crystallization in the Sm₂O₃–Bi₂O₃–B₂O₃ system were clarified. The crystalline phases of Bi₄B₂O₉, Bi₃B₅O₁₂, BiBO₃, Sm _x Bi_{1− x} BO₃, and SmB₃O₆ were formed through the usual crystallization in an electric furnace. The crystallized glasses consisting of BiBO₃ and Sm _x Bi_{1− x} BO₃ showed SH generations. The formation of the nonlinear optical BiB₃O₆ phase was not confirmed. The formation (writing) region of crystal lines consisting of Sm _x Bi_{1− x} BO₃ by YAG laser irradiation was determined, in which Sm₂O₃ contents were∼10 mol%. The present study demonstrates that Sm₂O₃–Bi₂O₃–B₂O₃ glasses are promising materials for optical functional applications.     

Strictly Conserved Residues in Euphorbia tirucalli β‐Amyrin Cyclase: Trp612 Stabilizes Transient Cation through Cation–π Interaction and CH–π Interaction of Tyr736 with Leu734 Confers Robust Local Protein Architecture

The functions of Trp612, Leu734, and Tyr736 of Euphorbia tirucalli β‐amyrin synthase were examined. The aliphatic variants (Ala, Val, Met) of Trp612 showed almost no activity, but the aromatic variants exhibited high activities: 12.5 % of the wild‐type activity for the W612H variant, 43 % for W612F, and 63 % for W612Y. That is, the enzymatic activities of the variants increased in proportion to the increase in π‐electron density. Thus, the major function of Trp612 is to stabilize transient cations through a cation–π interaction. The Phe and Tyr variants caused a distorted folding conformation, especially at the E‐ring site, which generated the aberrantly cyclized products germanicol and lupeol. The L734G and L734A variants exhibited significantly decreased activities but yielded taraxerol in a high production ratio. The Val, Ile, and Met variants showed markedly high activities (56–78 % of wild‐type activity); therefore, appropriate steric bulk is required at this position. The aliphatic variants of Tyr736 showed markedly decreased activities, but the Phe mutant exhibited high activity (67 %), which indicates that the π electrons are critical for catalysis. Homology modeling indicated that Tyr736 and Leu734 are perpendicular to the substrate and are situated face to face, which suggests that a CH–π interaction occurs between Tyr736 and Leu734, reinforcing the protein architecture, and that Tyr736 cannot stabilize cationic intermediates through a cation–π interaction.     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.     

Dual roles of proteasome in the metabolism of presenilin 1

Presenilin 1 (PS1) has been identified as a causative gene for most early-onset familial Alzheimer's disease. Biochemical studies revealed that PS1 exists predominantly as two processed fragments in cells and brain tissues. We prepared stably transfected cells expressing the wild-type and familial Alzheimer's disease-associated mutants of PS1 and investigated the enzyme that participates in the metabolism of PS1. After treatment of the cells with proteasome inhibitors, the full-length PS1 was significantly accumulated. The levels of N- and C-terminal fragments were also increased. The accumulation of PS1 with a deletion of exon 10, which is unable to be processed, on treatment of the transfected cells with lactacystin indicated that proteasome can degrade full-length PS1. A synthetic peptide that includes the processing region of PS1 was cleaved by 20S proteasome at the putative processing sites after Met288 and Glu299. Metabolic labeling experiments showed that the appearance of the N-terminal fragment was attenuated by the inhibitor. Finally, 28-kDa N- and 20-kDa C-terminal fragments were generated by purified PS1 in vitro. These data indicated that the proteasome pathway is involved in PS1 processing. These results demonstrate that the proteasome pathway plays dual roles in processing and degradation of PS1.