Research on some basic deformations in free forging with robot and servo-press

Due to the disadvantages in casting or hot forging of Ti alloy artificial bones, such as low strength and high energy cost, this paper prompted an alternative method to manufacture individuated artificial bones. Free forging with a 6-axis freedom robot and servo-press could be very economical in the forming of complex shape parts because of its high flexibility and simple die-setting. Based on this system, the authors studied deformations of some basic elements, which could be assembled to artificial bones with complex shape. Firstly, the compression limit and effect of compression parameters on the roundness during reducing diameter process were declared for Al alloy and pure Ti. Secondly, an approximate theoretical equation of bending angle or curvature radius was proposed, and it matches experimental results well. Finally, a dimension prediction equation was presented by considering effect of material anisotropy, and then the ladder part without width spread was manufactured accordingly.     

Microelectrode-based hydrogen peroxide detection during oxygen reduction at Pt disk electrode

We investigated the diffusion process of H₂O₂ generated during O₂ reduction at a Pt microdisk electrode used as a generator for scanning electrochemical microscopy (SECM). First, the amount of O₂ consumption and generated H₂O₂ at the Pt generator electrode are estimated using a detector electrode installed in the SECM. Based on the results, a large amount of O₂ consumption and generated H₂O₂ are detected at the center of each generator electrode. According to the measurement, the O₂ starvation and H₂O₂ detection currents can be defined. Subsequently, the O₂ starvation and H₂O₂ detection currents are measured by varying the generator size. As a result, these currents decrease with a decrease in the generator electrode size, however, the H₂O₂ diffusion process is changed for the generator diameter of less than 50 μm. Finally, the O₂ starvation and H₂O₂ detection measurements were conducted using a Nafion-coated Pt microdisk electrode. The amount of O₂ consumption is not suppressed, while the amount of generated H₂O₂ decreases with the Nafion layer prepared on the Pt electrode. This result indicates that the thickness of the H₂O₂ diffusion layer in the H₂SO₄ solution is dramatically diminished by coating the Nafion layer on the Pt generator.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Synthesis and thermal cure of high molecular weight polybenzoxazine precursors and the properties of the thermosets

High molecular weight polybenzoxazine precursors have been synthesized from aromatic or aliphatic diamine and bisphenol-A with paraformaldehyde. The precursors were obtained as soluble white powder. Molecular weight was estimated from the size exclusion chromatography to be several thousands. The structure of the precursors was confirmed by IR, ¹H NMR and elemental analysis, indicating the presence of cyclic benzoxazine structure. The ratio of the ring-closed benzoxazine structure and the ring-opened structure in the high molecular weight precursor was estimated from ¹H NMR spectrum and also from the exotherm of DSC, showing that the ratio of the ring-closed benzoxazine structure was 77–98%. The precursor solution was cast on glass plate, giving transparent and self-standing precursor films, which was thermally cured up to 240 °C to give brown transparent polybenzoxazine films. The toughness of the crosslinked polybenzoxazine films from the high molecular weight precursors was greatly enhanced compared with the cured film from the typical low molecular weight monomer. Tensile measurement of the polybenzoxazine films revealed that polybenzoxazine from aromatic diamine exhibited the highest strength and modulus. While, polybenzoxazine from longer aliphatic diamine had higher elongation at break. The viscoelastic analyses showed that the glass transition temperature of the polybenzoxazines derived from the high molecular weight precursors were as high as 238–260 °C. Additionally, these novel polybenzoxazine thermosets showed excellent thermal stability.     

Orientation of nanowires consisting of poly(3-hexylthiophene) using strong magnetic field

Nanowires consisting of regioregular poly(3-hexylthiophene) (P3HT) as a conducting polymer were prepared using p-xylene. Magnetic processing of the nanowires was carried out using two superconducting magnets with horizontal (B_max = 8 T) and vertical (B_max = 10 T) directions. The formation of the nanowires was confirmed by atomic force microscopy (AFM) measurement. The results from the AFM images and the polarized absorption spectra on glass plates indicated that the nanowires partly oriented themselves with their long axes, which are parallel to the π–π stacking direction, being perpendicular to the magnetic field. The magnetic orientation is most likely ascribed to anisotropy in the magnetic susceptibilities of the ordered P3HT in the nanowires.     

Water vapor solubility of poly(lactic acid) films modified the surface by vacuum ultraviolet irradiation

Surface modification of poly(lactic acid) (PLA) film is performed via 172 nm excimer lamp irradiation. Effects on water vapor solubility and physical properties via vacuum ultraviolet (VUV) irradiation are studied systematically. After VUV irradiation, water vapor solubility increases approximately 11–43% in the low‐pressure region and approximately 20–38% in the high‐pressure region as surface hydrophilicity increased. The increase is attributed to hydrogen bonding with the carboxyl groups because of VUV radiation. The modified layer is significantly swelling after water vapor sorption. The hydrophilic layer forms a thickness of 2–3 μm from the irradiated surface via VUV radiation, but no changes are observed inside the irradiated film. Therefore, PLA film solubility after irradiation is enhanced by hydrophilicity and the swelling effect of the surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42200.     

Absolute Configuration of β- and α-Asymmetric Carbons within β-O-4-Structures in Hardwood Lignin

In this study, we investigated the proportion of erythro- and threo-forms of β-O-4-ether structures and their enantiomeric compositions in hardwood lignin by applying the ozonation method to birch wood meal. Optical activity was not substantially observed in either the erythronic or threonic acids obtained as the ozonation products of β-O-4-structures in birch wood meal. The proportions of the four stereoisomeric forms {(αS,βR)-erythro, (αR,βR)-threo, (αS,βS)-threo, and (αR,βS)-erythro forms} were estimated to be 37-38%, 13-14%, 12-13%, and 36-37% based on the yields of erythronic and threonic acids, and on their optical activities. The proportions suggest that the entire components of β-O-4-ether structures in birch wood lignin have R- and S-configurations at the β-carbon in approximately the same quantities {(βR)-β-O-4-structure: (βS)-β-O-4-structure = 50–52:48–50}; i.e., that the β-ether structures are essentially racemic. This estimation implies that, during lignin biosynthesis, an equal number of enantiomeric forms of β-O-4-bonded quinone methides were formed by radical coupling reactions.     

Enhancement of the thermal stability and mechanical properties of a PMMA/aluminum trihydroxide composite synthesized via bead milling

The use of aluminum trihydroxide (ATH) fillers as non-halogen flame retardants for polymethylmethacrylates (PMMA) creates a conflict between the mechanical properties and heat resistance of the composites. Therefore, to ensure that the PMMA mechanical properties remain satisfactory, improvements in both the filler–polymer interactions and the ability to control the size and size distribution, morphology and dispersion of the fillers are required. Thus, in the present study, bead milling was used to control both the size distribution and dispersion of ATH fillers in MMA, which had an initial average size of 0.75 μm. The dispersion was obtained by alteration of the surface characteristics of ATH fillers using a silane-based dispersing agent, (3-acryloxypropyl) trimethoxysilane (APTMS). Bead milling successfully comminuted the ATH particles and prevented the formation of ATH agglomerates. The smallest average size of the ATH particles after bead milling was 300 nm. Highly dispersed ATH filler particles were observed in the TEM images of the PMMA/ATH composites. The filler–polymer interaction, i.e. the interaction parameter (B), was calculated. The effects of volume fraction, particle size distribution, and surface modification of the fillers on the results of dynamic mechanical analysis (DMA) are discussed. The thermal stability of the PMMA/ATH composites was also investigated using thermal gravimetric analysis (TGA).