Oxidation mechanisms of SiC-fiber–reinforced Si eutectic alloy matrix composites at elevated temperatures

SiC-fiber–reinforced binary Si eutectic alloy composites have been developed for aerospace applications using the melt infiltration method. In this study, the oxidation mechanisms of various binary Si eutectic alloys were evaluated at elevated temperatures. We suggest that the oxidation resistance of eutectic alloys could be predicted using the Gibbs energy change for the oxidation reaction. Based on these calculations, eutectic alloys of Si-16at%Ti, Si-17at%Cr, Si-22at%Co, Si-38at%Co, and Si-27at%Fe were prepared. These alloys produced uniform SiO₂ layers and showed the same oxidation resistance as Si at 1000°C under humid conditions. Therefore, SiC composites using Si alloys with excellent oxidation resistance can be predicted using thermodynamic calculations.     

A PSS‐Free PEDOT Conductive Film Supported by a Hierarchical Nanoporous Layer Glass

The importance of transparent conductive film is increasing due to its use in applications such as touch‐panel devices. Although indium tin oxide is widely used because of its high conductivity and transparency, conductive polymers are being studied as alternative materials that avoid the use of rare metals and the brittleness associated with existing systems. Polyethylene dioxythiophene (PEDOT)/polyethylene sulfonic acid (PSS) is drawing a lot of attention due to its well‐balanced conductivity, transparency, film formability, and chemical stability. The nonconductive PSS reportedly covers the conductive PEDOT. The PSS shell provides carrier and film‐formability to PEDOT but is also a barrier that hinders electrical conductivity. Therefore, the PEDOT film formability is explored supported by a substrate without the addition of PSS. The “hierarchical nanoporous layer glass” holds the PSS‐free PEDOT with its nanopores to form a homogeneous, transparent film. The PSS‐free PEDOT film thus achieves transparency of over 85% and resistivity of below 500 Ω sq^?1.     

Solvent free mechanochemical synthesis of MnO2 for the efficient degradation of Rhodamine-B

MnO₂ nanorods were synthesized by mechanochemical processing with subsequent heat treatment and their photocatalytic activity was studied on the decolourization of aqueous solution of Rhodamine B at different pH levels. A solid state redox reaction 2KMnO₄ + MnCl₂ → 3MnO₂ + 2KCl + O₂ was activated during mechanical milling. Excess KCl salt was added in the starting powder mixture to prevent agglomeration of MnO₂ nanoparticles. The milling resulted in the production of amorphous MnO₂ nanoparticles with a high surface area of 204 m² g^?1. Crystalline MnO₂ nanorods of diameters about 15–20 nm were produced by heating the as-milled powder at 350 °C for 1 h in air. Amorphous MnO₂ nanoparticles showed higher degradation rate of Rhodamine B than crystalline MnO₂ nanorods under simulated sunlight. The degradation rate was higher under acidic conditions. This work demonstrates the potential for cost effective, green and scalable synthesis of MnO₂ nano-catalysts for environmental applications.     

Research on some basic deformations in free forging with robot and servo-press

Due to the disadvantages in casting or hot forging of Ti alloy artificial bones, such as low strength and high energy cost, this paper prompted an alternative method to manufacture individuated artificial bones. Free forging with a 6-axis freedom robot and servo-press could be very economical in the forming of complex shape parts because of its high flexibility and simple die-setting. Based on this system, the authors studied deformations of some basic elements, which could be assembled to artificial bones with complex shape. Firstly, the compression limit and effect of compression parameters on the roundness during reducing diameter process were declared for Al alloy and pure Ti. Secondly, an approximate theoretical equation of bending angle or curvature radius was proposed, and it matches experimental results well. Finally, a dimension prediction equation was presented by considering effect of material anisotropy, and then the ladder part without width spread was manufactured accordingly.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Orientation of nanowires consisting of poly(3-hexylthiophene) using strong magnetic field

Nanowires consisting of regioregular poly(3-hexylthiophene) (P3HT) as a conducting polymer were prepared using p-xylene. Magnetic processing of the nanowires was carried out using two superconducting magnets with horizontal (B_max = 8 T) and vertical (B_max = 10 T) directions. The formation of the nanowires was confirmed by atomic force microscopy (AFM) measurement. The results from the AFM images and the polarized absorption spectra on glass plates indicated that the nanowires partly oriented themselves with their long axes, which are parallel to the π–π stacking direction, being perpendicular to the magnetic field. The magnetic orientation is most likely ascribed to anisotropy in the magnetic susceptibilities of the ordered P3HT in the nanowires.     

A novel MOSFET with vertical signal‐transfer capability for 3D‐structured CMOS image sensors

We have developed a novel MOSFET that can transfer signals vertically without through‐silicon vias but by using a fully depleted silicon‐on‐insulator (FDSOI) structure with its source region connected to the back electrodes as well as the front ones. A prototype MOSFET fabricated using the backside anisotropic wet etching technique has confirmed that the electrical characteristics measured from the front and the back electrodes are identical. The subthreshold factor S of the prototype was found to be 64.5 mV/decade, suggesting a good switching performance. Since the double‐sided MOSFET has vertical signal‐transfer capability and excellent operating characteristics, it is expected to contribute to developing a More‐than‐Moore type device of three‐dimensional integration such as pixel‐parallel image sensors. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.