Discrimination of B–C–N nanotubes through energy-filtering electron microscopy

Various multi-walled nanotubes in the B–C–N system are thoroughly investigated using a JEOL-3100FEF high-resolution field emission transmission electron microscope operating at 300 kV and equipped with an in-column built Omega filter. Spatially-resolved B, C and N elemental maps of the nanotubes are constructed. It is realized that a wide variety of tubular arrays composed of B, C and N atoms may exist in the system. Sandwich-like BN-rich and C-rich alternating tubular shells, graphitic C layers inside and outside of pure BN shells induced either by surface contamination, or electron beam irradiation, separation of C-rich and BN-rich tubes and/or BN particles within tubular bunches may take place. One should carefully take these effects into account while analyzing nanotube physical properties, e.g., electrical or optical, rather than simply rely on electron energy loss spectra typically collected from B, C and N containing nanostructures as a whole. Striking dependence of an individual nanotube electrical conductivity on tubular shell chemistry is demonstrated using I–V curve recording in an atomic force microscope.     

甲醇燃料的研发现状及发展前景

介绍了甲醇燃料的理化性质、作为车用替代燃料的性能及研发现状，分析了甲醇汽油存在的问题及发展前景。     

改性生物质作为型煤黏结剂的研究

探讨了用NaOH改性生物质秸秆作为型煤黏结剂的可行性,考察了NaOH溶液浓度对生物质改性的影响以及生物质添加量、无机物(MgO和MgCl2)添加量对型煤机械强度、防水性能和着火温度的影响。研究结果表明,NaOH改性液的质量分数为1.0%~2.0%时,制得的生物质型煤有较高的机械强度;生物质添加量在2%~20%时,随生物质添加量的增加,机械强度增加,着火温度降低,但防水性较差;而在生物质型煤中加入适量无机黏结剂后,型煤有很高的浸水强度,表现出优越的防水性能。     

稀土元素在陶瓷中的应用

从稀土元素的原子结构和化学特性出发,介绍了稀土元素的应用领域,阐述了稀土元素在陶瓷色釉料、各种氧化物陶瓷和非氧化物陶瓷中的应用.     

多孔薄膜荫罩热变形的有限元仿真设计

荫罩的热变形使电子束产生着屏偏移 ,进而导致了色纯变坏。本文采用大型软件ANSYS对 1 5英寸荫罩进行了热变形的有限元仿真 ,从而得到了电子束的着屏偏移。建立了包括阴极射线管 (CRT)里所有部件的完整的有限元模型。荫罩被建为无孔连续薄壳的模型 ,对它的表面导热系数和表面弹性模量作了等效的计算。考虑了弹簧片的预应力以及弹簧片和销钉的连接。这样可使我们的分析模型更接近真实情况。本文给出了 50 0、1 0 0 0、1 0 0 0 0s时的热变形和电子束着屏偏移。分析表明 :电子束着屏偏移的最大值发生在 50 0s左右。利用这种分析方法及研究结果可指导新型荫罩的设计和研制。     

A new method for producing high melt strength polypropylene with reactive extrusion

A high‐melt‐strength polypropylene (HMSPP) was prepared using a twin‐screw reactive extruder from a commercial isotactic polypropylene through two stages, first, maleic anhydride is grafted to polypropylene to obtain a maleic anhydride‐grafted polypropylene (PP‐g‐MA), and then the grafted polymer is reacted with epoxy to extend the branched chain. Fourier transformed infrared spectroscopy indicated that maleic anhydride was grafted on polypropylene and reacted with epoxy. Melt flow rate and sag resistance test showed that the melt strength of the HMSPP improved considerably. Differential scanning calorimetry test showed that the long chain branches (LCBs) act as a nucleating agent in the crystallization of the HMSPP, which leads to a high crystallization temperature and crystallinity. Furthermore, the LCB efficiency of the HMSPP can also be calculated by analyzing its rheological property. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

讲个“把握重点”的故事

1977年4月间,台北天母地区有22栋5层楼的公寓住宅,在广告攻势展开的第4天,即开始接受订购。到了订购的第3天,即达成10O%的销售成绩。其立竿见影效果之高,销售速度之快,为众房地产商所瞩目。这批公寓住宅的投资兴建者是台湾信托投资公司。其特色是采取凹型设计,数幢房屋合围着一块百余坪的空地。将这块空地再设计成一座小花园,即形成数幢房屋合围着一片有百余坪的绿地花园,对住户而言,颇为理想。设计完成后,台湾信托就准备刊播广告进行销售。广告代理商经过多次会商确定广告战略:1、强调这是金融业所兴建销售的房屋。2、强调房屋具有别墅的…     

充分关注水质科学保障饮水安全

从我国饮水安全的现状入手，分析城乡饮水安全存在的问题，强调保障饮水安全是构建和谐社会的必然要求和水利工作的切实要务。从加强监测、科学规划，加强关键技术研究及推广应用，保护水源地、修复水环境，建立合理的体制与机制四个方面提出了做好保障饮水安全工作的建议。