电冶矾土刚玉质自流浇注料的研究

以电冶矾土刚玉为骨料有利于提高浇注料的自流性能 ;六偏磷酸钠分散剂对Al2 O3泥浆流变性能有较理想的改善作用 ;电冶矾土刚玉质自流浇注料具有优良的抗渣性能 ,这主要同浇注料的显微结构和电冶矾土刚玉骨料的性能相关。     

Partial oxidation of methane to synthesis gas over α-Al2O3-supported bimetallic Pt–Co catalysts

The partial oxidation of methane to synthesis gas was studied at atmospheric pressure and in the temperature range of 550–800°C over -Al₂O₃-supported bimetallic Pt–Co, and monometallic Pt and Co catalysts, respectively. Both methane conversion and CO selectivity over a bimetallic Pt_0.5Co₁ catalyst were higher than those over monometallic Pt_0.5 and Co₁ catalysts. Furthermore, the addition of platinum in Pt–Co bimetallic catalysts effectively improved their resistance to carbon deposition with no coking occurring on Pt_0.5Co₁ during 80 h reaction. The FTIR study of CO adsorption observed only linearly bonded CO on bimetallic Pt–Co catalysts. TPR and XPS showed enhanced formation of a cobalt surface phase (CSP) in bimetallic Pt–Co catalysts. The origins of the good coking resistivity of bimetallic Pt–Co catalysts were discussed.     

炭黑生产工艺的进展

介绍了较为成熟的炭黑生产工艺,讨论了其各自在工业应用方面的前景,并对近年来涌现出的一些具有可应用前景的工艺方法进行了简要评述,同时也归纳了近几年炭黑生产工艺的进展表现。     

湿法净化磷酸市场发展趋势

分析了湿法净化磷酸的未来发展趋势。未来几年内欧洲和美国仍将是湿法净化磷酸的主要产区,并具有竞争优势。我国湿法净化磷酸将得到较大发展,并将成为湿法净化磷酸的全球主要生产国之一。     

不同地区不同等级复烤烟叶中重要致香物质的分析比较

本文采用同时蒸馏萃取(SDE)/气相色谱/质谱联用法(GC/MS)对相同品种、不同地区、不同等级复烤烟叶中的重要致香物质进行分析比较;并且对同时蒸馏萃取法进行重复性和回收率试验。结果表明相同品种、不同地区、不同等级复烤烟叶中重要致香物质的含量差别较大;同时蒸馏萃取法具有良好的重复性和较高的回收率。     

纤维素衍生物液晶相转变和织态结构

本文综述了纤维素衍生物液晶态相转变和织态结构。描述了纤维素衍生物从各向同性态向液晶态的转变过程和液晶态的织构特征。讨论了溶液浓度和温度对液晶相织构的影响。探讨了各种因素,如溶剂、取代基含量、外加力场和外加磁场等对液晶相的形成及织态结构的影响。     

混合材对碱—碳酸盐反应的影响

利用快速测长法研究了混合材对碱—碳酸盐反应的影响。通过试验证明混合材能减缓碱—碳酸盐反应的速度,但不能有效地抑制碱—碳酸盐反应,并初步探讨了混合材不能有效地抑制碱—碳酸盐反应的机理。     

Adjusting Pt Nanoparticle Size on SBA-15 by a Sol-Immobilisation Method Towards Naphthalene Hydrogenation

Regularly dispersed Pt particles on SBA-15 supported catalysts were synthesized with a Pt loading of 5 wt% by a sol-immobilisation method, wherein various Pt particle sizes within 1–5 nm were finely controlled via the adjustment of the addition amount of polyvinyl alcohol (PVA). A high PVA/Pt ratio of the initial solution tended to generate small Pt particles on the SBA-15 support due to intense protection against Pt particle aggregation. In addition, the effect of Pt particle size on naphthalene hydrogenation was investigated in terms of catalytic performance. Compared with the performance of other catalysts with Pt particle sizes greater or less than 3.5 nm, Pt nanoparticles with sizes centered at 3.5 nm exhibited excellent catalytic performance towards decalin. This excellent catalytic performance was mainly attributed to a suitable ratio of the edge sites to flat sites on these Pt nanoparticles, benefitting the rapid adsorption of naphthalene and dissociation of hydrogen.

Graphical Abstract

The Pt/SBA-15 catalysts were prepared by sol-immobilisation method. The highest performance was attributed to the Pt-nanoparticles with suitable flat/edge sites ratio.

     

石油化工管道阻燃保温材料的研制

介绍酚醛泡沫塑料的生产工艺和性能，讨论酚／醛比、催化剂对树脂性能的影响以及树脂固含量、固化剂、密度对泡沫塑料性能的影响。结果表明，酚／醛摩尔比为1：1．5－2．0、采用复合催化剂时，树脂性能较好；固含量较高时，泡沫塑料性能好；泡沫塑料密度增大，强度提高，但保温性能变差。所研制的酚醛泡沫塑料耐燃、少烟、无毒，可用作石油化工管道保温材料。     

压力容器环焊缝事故率高的剖析及对策

本文从压力容器设计、制造及标准三方面分析了压力容器环焊缝事故率高的原因,提出了相应的对策。希压力容器有关工程技术人员要充分重视压力容器环焊缝的质量问题,以确保压力容器的安全使用。