Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates

Hemp fibre‐reinforced polycaprolactone (HFRP) composite has inherent good mechanical properties and benefits which include remarkably high specific strength and modulus, low density, and renewability. No doubt, these properties have attracted wider applications of HFRP composite in engineering applications. This paper presents an investigation on the influence of drilling parameters and fibre aspect ratios, AR (0, 19, 26, 30, and 38) on delamination damage factor and surface roughness of HFRP composite laminates utilising high speed steel twist drills under dry machining condition. Taguchi's technique was used in the design of experiment. The results obtained show that increase in cutting speed reduces delamination factor and surface roughness of drilled holes, whereas increase in feed rate causes increase in both delamination factor and surface roughness. Feed rate and cutting speed had the greatest influence on delamination and surface roughness respectively when compared with aspect ratio, while an increase in fibre aspect ratios leads to a significant increase in both delamination factor and surface roughness. The optimum results occurred at cutting speed and feed rate (drilling parameters) of 20 mm/min and 0.10 mm/rev, respectively, when drilling sample of AR 19. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42879.     

15‐Methylene‐Eburnamonine Kills Leukemic Stem Cells and Reduces Engraftment in a Humanized Bone Marrow Xenograft Mouse Model of Leukemia

Recent studies suggest that leukemia stem cells (LSCs) play a critical role in the initiation, propagation, and relapse of leukemia. Herein we show that (?)‐15‐methylene‐eburnamonine, a derivative of the alkaloid (?)‐eburnamonine, is cytotoxic against acute and chronic lymphocytic leukemias (ALL and CLL) and acute myelogenous leukemia (AML). The agent also decreases primary LSC frequency in vitro. The cytotoxic effects appear to be mediated via the oxidative stress pathways. Furthermore, we show that the compound kills AML, ALL, and CLL stem cells. By the use of a novel humanized bone marrow murine model of leukemia (huBM/NSG), it was found to decrease progenitor cell engraftment.     

DC Electrical Resistivity and Magnetic Property of Single-Phase α-Fe2O3 Nanopowder Synthesized by a Simple Chemical Method

Nanocrystalline pure α-Fe₂O₃ powder, with an average particle size of 35 nm, has been synthesized by using an aqueous solution-based synthetic route. DC electrical resistivity of the synthesized material was measured with respect to temperature by the two-probe method from 28° to 225°C. Room temperature resistivity of the nanopowder was ∼10⁸Ω·cm. Magnetic hysteresis measurement revealed that the synthesized α-Fe₂O₃ nanopowder exhibited ferromagnetic behavior at room temperature. The hysteretic features are high saturation magnetization of 5.1 emu/g, high remanence of 2.2 emu/g, and coercivity of 200.5 Oe.     

Laser surface alloying of aluminium with WC + Co + NiCr for improved wear resistance

In the present study, laser surface alloying of aluminium with WC + Co + NiCr (in the ratio of 70:15:15) has been conducted using a 5 kW continuous wave (CW) Nd:YAG laser (at a beam diameter of 0.003 m), with the output power ranging from 3 to 3.5 kW and scan speed from 0.012 m/s to 0.04 m/s by simultaneous feeding of precursor powder (at a flow rate of 1 × 10^− 5 kg/s) and using He shroud at a gas flow rate of 3 × 10^− 6 m³/s. The effect of laser power and scan speed on the characteristics (microstructures, phases and composition) and properties (wear and corrosion resistance) of the surface alloyed layer have been investigated in details. Laser surface alloying leads to development of fine grained aluminium with the dispersion of WC, W₂C, Al₄C₃, Al₉Co₂, Al₃Ni, Cr₂₃C₆, and Co₆W₆C. The microhardness of the alloyed zone is significantly improved to a maximum value of 650 VHN as compared to 22 VHN of the as-received aluminium substrate. The mechanism of microhardness enhancement has been established. The fretting wear behavior of the alloyed zone was evaluated against WC by Ball-on-disc wear testing unit and the mechanism of wear was established.     

Studies on Advanced RDX/TATB Based Low Vulnerable Sheet Explosives with HTPB Binder

Hydroxyl‐terminated polybutadiene (HTPB) based sheet explosives incorporating insensitive 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB) as a part replacement of cyclotrimethylene trinitramine (RDX) have been prepared during this work. The effect of incorporation of TATB on physical, thermal, and sensitivity behavior as well as initiation by small and high caliber shaped charges has been determined. Composition containing 85% dioctyl phthalate (DOP) coated RDX and 15% HTPB binder was taken as control. The incorporation of 10–20% TATB at the cost of RDX led to a remarkable increase in density (1.43→1.49 g cm⁻³) and tensile strength (10→15 kg cm⁻²) compared to the control composition RDX/HTPB(85/15). RDX/TATB/HTPB based compositions were found less vulnerable to shock stimuli. Shock sensitivity was found to be of the order of 20.0–29.2 GPa as against 18.0 GPa for control composition whereas their energetics in terms of velocity of detonation (VOD) were altered marginally. Differential scanning calorimeter (DSC) and thermogravimetry (TG) studies brought out that compositions undergo major decomposition in the temperature region of 170–240 °C.     

Effect of branched PP content on the physical properties and cell growth during foaming of TPOs

Linear/branched PP blends at various ratios were used as the matrix for thermoplastic olefin (TPO) compounds, containing an ethylene–octene copolymer dispersed phase. A detailed investigation of the physical properties of these blends revealed that addition of branched PP (BPP) resulted in improved stiffness and flexural properties. Given that the phase morphology of the blends and the interfacial tension between their components remained virtually unaffected, these improvements are attributed to the higher stiffness of the BPP‐containing matrices. Talc‐filled TPOs containing branched PPs exhibited further improvements in the stiffness and flexural properties. An investigation into the bubble growth process during foaming using a batch foaming simulation system revealed that the presence of BPP resulted in a slight delay in cell nucleation, whereas the rate of bubble growth was not significantly altered. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Novel Synthesis of SrBi2Nb2O9 Powders From Hydroxide Precursors

Simple hydroxide precursors were used for the first time for the synthesis of a typical Aurivillius compound (SrBi₂Nb₂O₉ (SBN)) at a low temperature. This method is very advantageous because it circumvents the use of SrCO₃ in the case of conventional ceramics as well in the coprecipitation methods, thereby lowering the formation of the product phase. Commercially purchased strontium hydroxide is mixed thoroughly with freshly precipitated bismuth and niobium hydroxides in a stoichiometric ratio and heated at different temperatures ranging from 100°C to 750°C for 12 h. The sequence of the reaction and evolution of the product phase was monitored by X-ray diffraction (XRD) studies by recording the XRD for samples calcined at different temperatures. The incipient SBN phase begins to form at temperatures as low as 400°C, and phase formation was complete only at 650°C as revealed by the XRD observations. The differential thermal/thermogravimetric analyses) also corroborate this result. The morphology and average particle size of these powders were investigated by transmission electron microscopy studies.     

Evaluation of the effect of heat input in superduplex stainless steel deposition by the plasma powder process*

Plasma powder surfacing is one of the latest processes for application of coatings, with control of dilution as its main feature. Surfacing with superduplex stainless steels is an interesting option for the construction and repair of equipment for applications in a highly corrosive environment, allowing the desired characteristics to be achieved: corrosion resistance and good mechanical properties. The aim of this work is to assess the ferrite content in the weld metal and the mechanical characteristics via microhardness profiles in surfacing of C-Mn steel pipes with deposition of UNS S32760 by plasma powder surfacing. Welding operations were carried out on pipes with deposition of SDSS, employing three welding heat input levels, varying the welding speed or the welding current. Then the geometry was analysed, the ferrite content in the weld metal was quantified and the microhardness profile was recorded. Variation in welding heat input caused changes in weld bead geometry, with variation in the welding current producing the most significant changes. Increase in heat input caused decrease in ferrite content of the weld metal. Regarding microhardness, only the condition with a higher level of welding current gave sufficiently high levels of microhardness in the weld metal.     

Ratiometric Detection of Glutathione Based on Disulfide Linkage Rupture between a FRET Coumarin Donor and a Rhodamine Acceptor

Abnormal levels of glutathione, a cellular antioxidant, can lead to a variety of diseases. We have constructed a near-infrared ratiometric fluorescent probe to detect glutathione concentrations in biological samples. The probe consists of a coumarin donor, which is connected through a disulfide-tethered linker to a rhodamine acceptor. Under the excitation of the coumarin donor at 405 nm, the probe shows weak visible fluorescence of the coumarin donor at 470 nm and strong near-infrared fluorescence of the rhodamine acceptor at 652 nm due to efficient Forster resonance energy transfer (FRET) from the donor to the acceptor. Glutathione breaks the disulfide bond through reduction, which results in a dramatic increase in coumarin fluorescence and a corresponding decrease in rhodamine fluorescence. The probe possesses excellent cell permeability, biocompatibility, and good ratiometric fluorescence responses to glutathione and cysteine with a self-calibration capability. The probe was utilized to ratiometrically visualize glutathione concentration alterations in HeLa cells and Drosophila melanogaster larvae.     

Physiological Imaging Methods for Evaluating Response to Immunotherapies in Glioblastomas

Glioblastoma (GBM) is the most malignant brain tumor in adults, with a dismal prognosis despite aggressive multi-modal therapy. Immunotherapy is currently being evaluated as an alternate treatment modality for recurrent GBMs in clinical trials. These immunotherapeutic approaches harness the patient’s immune response to fight and eliminate tumor cells. Standard MR imaging is not adequate for response assessment to immunotherapy in GBM patients even after using refined response assessment criteria secondary to amplified immune response. Thus, there is an urgent need for the development of effective and alternative neuroimaging techniques for accurate response assessment. To this end, some groups have reported the potential of diffusion and perfusion MR imaging and amino acid-based positron emission tomography techniques in evaluating treatment response to different immunotherapeutic regimens in GBMs. The main goal of these techniques is to provide definitive metrics of treatment response at earlier time points for making informed decisions on future therapeutic interventions. This review provides an overview of available immunotherapeutic approaches used to treat GBMs. It discusses the limitations of conventional imaging and potential utilities of physiologic imaging techniques in the response assessment to immunotherapies. It also describes challenges associated with these imaging methods and potential solutions to avoid them.