A 3-D Miniaturization Method for Low-Impedance Designs

Microstrip interconnects with a V conductor are designed, fabricated, and measured to provide a compact solution for designs requiring low characteristic impedance lines. S-parameter curves are shown up to 35 GHz for 0.5-cm-long lines. The 308-mum-deep V structure produces a 33.8-Omega line with strong standing waves and reflections under 5 dB. To further reduce the impedance, a partial shield is added that results in 6.7 times reduction of signal line width, near elimination of open-end effect, and excellent correlation with a standard 15-Omega microstrip up to 25 GHz. A filter demonstration shows near ideal behavior in the 3 dB response and low return loss when compared to a similar conventional design.     

PVT EMPIRICAL MODELS FOR SATURATED OMANI CRUDE OILS

Pressure-volume-temperature (PVT) properties are critical to reservoir as well as production engineers, in particular. PVT properties could be determined experimentally. But, experiments are time consuming and costly. Moreover, laboratory PVT analysis does not consider the variations of PVT properties with respect to temperature since they are measured at reservoir temperature at the time of sampling. For that matter, the data is not benefitable. But, even if experimental analysis is done, it is difficult to obtain representative results to develop a new field. To tackle the above and other related problems, relying on sound PVT emperical correlations would be the ultimate solution. In this work, the intent is to develop stochastic models for PVT properties pertaining to Omani crude oils since it is believed that such correlations are scarce and not very precise. The empirical equations are developed for saturated Omani crude oils. The correlations are tested and validated. The empirical equations evaluation and assessment are done against existent experimental data and published correlations.     

Lattice Distortion Analysis Directly from High Resolution Transmission Electron Microscopy Images—the LADIA Program Package

Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures.At proper imaging conditions the intensity peaks in the image have a constant spatial relationship with the projected atom columns.This allows the determination of the geometry of the projected unit cell without comparison with image simulations.The fast procedure is particularly suited for the analysis of large areas.The software package LADIA is written in the PV-WAVE code and provides all necessary tools for image processing and analysis.Image iintensity peaks are determined by a cross-correlation technique,which avoids problems from noise in the low spatial frequency renage.The lower limit of strain that can be detected at a sampling rate of 44 pixels/nm is ≈2%.     

Providing application-level QoS in 3G/4G wireless systems: a comprehensive framework based on multirate CDMA

The emerging applications for 3G and 4G wireless systems typically require highly heterogeneous and time-varying quality of service from the underlying protocol layers. The wireless links, however, provide only an unreliable communication channel that suffers from temporal outages. As a consequence, protocol mechanisms are needed that, based on the unreliable wireless links, provide the different service qualities required by the emerging applications. We identify the emerging IP-based applications for 3G and 4G wireless systems and categorize their QoS requirements. We discuss the wireless access mechanisms that show promise as the basis for supporting these applications. We then propose a set of protocol mechanisms that, based on the discussed wireless access mechanisms, provide the required QoS for the different application categories.     

安全:爆破工程永恒的主题——2001年重大拆除爆破工程回顾

通过对2001年我国重大拆除爆破工程的回顾,认为在提高大面积毫秒非电起爆网络可靠性,控制爆破震动、扬尘、噪声等环境影响,与机械清理配合,实现快速施工等方面取得了进展与突破;对几起爆破安全事故进行了初步分析.为保证拆除爆破工程安全,在加强理论研究、开展技术创新、建立科学有序的管理制度等方面提出了建议意见.     

Quantitating Fluorescence Intensity from Fluorophore: The Definition of MESF Assignment

The quantitation of fluorescence radiance may at first suggest the need to obtain the number of fluorophore that are responsible for the measured fluorescence radiance. This goal is beset by many difficulties since the fluorescence radiance depends on three parameters 1) the probability of absorbing a photon (molar extinction), 2) the number of fluorophores, and 3) the probability of radiative decay of the excited state (quantum yield). If we use the same fluorophore in the reference solution and the analyte then, to a good approximation, the molar extinction drops out from the comparison of fluorescence radiance and we are left with the comparison of fluorescence yield which is defined as the product of fluorophore concentration and the molecular quantum yield. The equality of fluorescence yields from two solutions leads to the notion of equivalent number of fluorophores in the two solutions that is the basis for assignment of MESF (Molecules of Equivalent Soluble Fluorophore) values. We discuss how MESF values are assigned to labeled microbeads and by extension to labeled antibodies, and how these assignments can lead to the estimate of the number of bound antibodies in flow cytometer measurements.     

Uncertainty in Quantitative Electron Probe Microanalysis

Quantitative electron probe analysis is based on models based on the physics or x-ray generation, empirically adjusted to the analyses of specimens of known composition. Their accuracy can be estimated by applying them to a set of specimens of presumably well-known composition.     

Novel bipolar differential input/output current-controlled current source

A new bipolar differential input/output current-controlled current source (CCCS) is described. The basic cell consists of a translinear array of six transistors with two bipolar inputs, and is suited for the input stage of a differential current-mode operational amplifier.     

Microsomal and photochemical oxidation of aflatoxin B1

The UV irradiation (lambda = 362 nm) of aflatoxin B1 (AfB1) dissolved in water resulted in the formation of an oxidized product. The process was not inhibited by ionol, a routine inhibitor of the radical processes. The oxidized product was not found in the system where AfB1 was metabolized by the 3-methylcholanthrene-activated rat liver microsomes. It is suggested that the product is identical with 2,3-dihydrodiol of AfB1.