A chemometric approach for the quantification of free fatty acids in cottonseed oil by Fourier transform infrared spectroscopy

The aim of this study was to quantify free fatty acid in cottonseed oil (Gossypium) variety by a chemometric approach using Fourier transform infrared spectroscopy. Calibration standards were prepared by gravimetrical mixing of oleic acid (0.1–40 g/100 g) in neutralized cottonseed oil containing <0.1% free fatty acids. Fourier transform infrared technique coupled with partial least square and principle component regression models were used to develop calibrations in the specific absorption region of carbonyl between 1690–1727 cm^?1. On the basis of regression coefficient and evaluated free fatty acids results with comparison to titration method, partial least square was found to be more accurate than principle component regression calibration model. All the analyzed cottonseed oil varieties showed high content of free fatty acids in the range of 17.1–38.5%. The results of the present study indicated that Fourier transform infrared method in combination with partial least square or principle component regression could be used as a greener alternative to the standard titration method.     

Comparative study of the phenolics,antioxidant and metagenomic composition of novel soy whey-based beverages produced using three different water kefir microbiota

Water kefir microbiota was used to develop novel soy whey-based beverages that have antioxidant activity. In the present study, comparative phenolics, antioxidant and metagenomic composition of the soy whey beverages fermented using three different water kefir microbiota, named WKFS-A, WKFS-B and WKFS-C were investigated. WKFS-B beverage had the highest concentrations of isoflavone aglycones (208.73 ± 2.78 mg L⁻¹) and phenolic acids (132.33 ± 3.41 mg L⁻¹) compared with WKFS-A (193.88 ± 1.15 mg L⁻¹) and (91.73 ± 2.34 mg L⁻¹) and WKFS-C (160.63 ± 1.76 mg L⁻¹) and (97.13 ± 2.63 mg L⁻¹), respectively. The WKFS-B also showed higher DPPH and ABTS radical scavenging activity and ferric reducing antioxidant power compared with WKFS-A and WKFS-C beverages. Microbial species diversity index analysis showed that a higher concentration of isoflavone aglycones, phenolic acids and increased antioxidant activity in the WKFS-B beverage correlates with the higher relative abundance of Lactobacillus genus. This study thus revealed that Lactobacillus dominated water kefir microbiota produces soy whey beverages with high phenolic acids, isoflavone aglycones and antioxidant activity.     

Enzymic and in sacco methods to estimate rumen degradation of food protein in cattle

BACKGROUND: Two factorial studies compared enzymic and in sacco methods to estimate degradation of ruminant foods. Enzyme degradation (in vitro = enzyme) was determined from the release of leucine‐equivalent amino acid (LA) crude protein (CP) from sunflower meal (SF), maize gluten meal (MG), distillers' dark grain (DG) and field beans (FB) after their separate incubations with Streptomyces griseus enzyme for 0–24 h. In sacco crude protein (CP) degradation of these foods was estimated during washing (0 h) and rumen incubations in fistulated cows for 2–24 h. The LA data were expressed as g LA per either kg of CP (LACP) or acid‐hydrolysable LA (HLA) of each food and compared with in sacco data. RESULTS: These methods showed comparable degradation with time (P < 0.01). The in sacco and HLA were greater than LACP for all foods except MG where in sacco value was either lower or equal to LACP depending upon the incubation time (P > 0.05 or P < 0.05). Conversely, HLA was significantly (P < 0.01) greater than LACP from 2 h onwards. At 0 h, in sacco values were significantly greater than those of enzyme for SF, DG and FB (P < 0.05) but not for MG. The foods differed significantly for degradation constants (a, b, c) in each method (P < 0.05). CONCLUSIONS: Despite variations between in sacco and enzyme estimates for different foods, the relationships between these estimates suggest that the HLA enzyme method has the potential to estimate food degradation. Copyright © 2007 Society of Chemical Industry     

Total Phenolic Compounds, Flavonoids, and Radical Scavenging Activity of 21 Selected Tropical Plants

ABSTRACT:  Free radical scavenging activity of 21 tropical plant extracts was evaluated using 1,1-diphenyl-2-picrylhydrazyl assay (DPPH). Total phenolic compounds and flavonoids were determined using Folin–Ciocalteu and HPLC, respectively. Results of the study revealed that all the plants tested exhibited excellent antioxidant activity with IC₅₀ in the range of 21.3 to 89.6 μg/mL. The most potent activity was demonstrated by  Cosmos caudatus  (21.3 μg/mL) and  Piper betle  (23.0 μg/mL) that are not significantly different than that of     -tocopherol or BHA.  L. inermis  extract was found to consist of the highest concentration of phenolics, catechin, epicatechin, and naringenin. High content of quercetin, myricetin, and kaempferol were identified in  Vitex negundo ,  Centella asiatica , and  Sesbania grandiflora  extracts, respectively. Luteolin and apigenin, on the other hand, were found in  Premna cordifolia  and  Kaempferia galanga  extracts. Strong correlation ( R  = 0.8613) between total phenolic compounds and total flavonoids ( R  = 0.8430) and that of antioxidant activity of the extracts were observed. The study revealed that phenolic, in particular flavonoids, may be the main contributors to the antioxidant activity exhibited by the plants.
Practical Application: Potent antioxidant from natural sources is of great interest to replace the use of synthetic antioxidants. In addition, some of the plants have great potential to be used in the development of functional ingredients/foods that are currently in demand for the health benefits associated with their use.     

Arsenic removal with iron(II) and iron(III) in waters with high silicate and phosphate concentrations

Arsenic removal by passive treatment, in which naturally present Fe(II) is oxidized by aeration and the forming iron(III) (hydr)oxides precipitate with adsorbed arsenic, is the simplest conceivable water treatment option. However, competing anions and low iron concentrations often require additional iron. Application of Fe(II) instead of the usually applied Fe(III) is shown to be advantageous, as oxidation of Fe(II) by dissolved oxygen causes partial oxidation of As(III) and iron(III) (hydr)oxides formed from Fe(II) have higher sorption capacities. In simulated groundwater (8.2 mM HCO3(-), 2.5 mM Ca2+, 1.6 mM Mg2+, 30 mg/L Si, 3 mg/L P, 500 ppb As(III), or As(V), pH 7.0 +/- 0.1), addition of Fe(II) clearly leads to better As removal than Fe(III). Multiple additions of Fe(II) further improved the removal of As(II). A competitive coprecipitation model that considers As(III) oxidation explains the observed results and allows the estimation of arsenic removal under different conditions. Lowering 500 microg/L As(III) to below 50 microg/L As(tot) in filtered water required > 80 mg/L Fe(III), 50-55 mg/L Fe(II) in one single addition, and 20-25 mg/L in multiple additions. With As(V), 10-12 mg/L Fe(II) and 15-18 mg/L Fe(III) was required. In the absence of Si and P, removal efficiencies for Fe(II) and Fe(III) were similar: 30-40 mg/L was required for As(II), and 2.0-2.5 mg/L was required for As(V). In a field study with 22 tubewells in Bangladesh, passive treatment efficiently removed phosphate, but iron contents were generally too low for efficient arsenic removal.