Synergistic effect of metal components of the low-loaded Pt-Ni-Cr/C catalyst in the bicyclohexyl dehydrogenation reaction

The problem of hydrogen storage in liquid organic hydrogen carriers is not only the choice of an appropriate organic substrate, but the development of a selective and active catalyst containing as low as possible noble metals. A synergistic effect of increasing conversion and selectivity in bicyclohexyl dehydrogenation to biphenyl on trimetallic Pt-Ni-Cr/C catalysts with an extremely low Pt loading (0.1 wt %), compared with bimetallic Ni-Cr/C and Pt/Ni/C systems, due to the supporting of platinum on nickel-chromium nanoparticles was established for the first time. The TOF values (mmol (H₂)/g_Pt min) for hydrogen evolution under conditions of the reaction of bicyclohexyl dehydrogenation (320 °C, 0.1 MPa) on Pt supported onto a Ni-Cr/С composite exceed by two orders of magnitude the values found for the two-component catalysts. The maximum amount of the evolved hydrogen correlates to the selectivity of the complete dehydrogenation of bicyclohexyl into biphenyl on the Pt-Ni-Cr/C catalyst. The formation of a Ni-Cr solid substitution solution in a Ni-Cr composite deposited on a carbon carrier is shown by magnetometry, XRD, and TEM methods.     

Genetic Background Underlying 5-HT1A Receptor Functioning Affects the Response to Fluoxetine

The influence of genetic background on sensitivity to drugs represents a topical problem of personalized medicine. Here, we investigated the effect of chronic (20 mg/kg, 14 days, i.p.) antidepressant fluoxetine treatment on recombinant B6-M76C mice, differed from control B6-M76B mice by CBA-derived 102.73–110.56 Mbp fragment of chromosome 13 and characterized by altered sensitivity of 5-HT_1A receptors to chronic 8-OH-DPAT administration and higher 5-HT_1A receptor mRNA levels in the frontal cortex and hippocampus. Significant changes in the effects of fluoxetine treatment on behavior and brain 5-HT system in recombinant B6-M76C mice were revealed. In contrast to B6-M76B mice, in B6-M76C mice, fluoxetine produced pro-depressive effects, assessed in a forced swim test. Fluoxetine decreased 5-HT_1A receptor mRNA levels in the cortex and hippocampus, reduced 5-HT_1A receptor protein levels and increased receptor silencer Freud-1 protein levels in the hippocampus of B6-M76C mice. Fluoxetine increased mRNA levels of the gene encoding key enzyme for 5-HT synthesis in the brain, tryptophan hydroxylase-2, but decreased tryptophan hydroxylase-2 protein levels in the midbrain of B6-M76B mice. These changes were accompanied by increased expression of the 5-HT transporter gene. Fluoxetine reduced 5-HT and 5-HIAA levels in cortex, hippocampus and midbrain of B6-M76B and in cortex and midbrain of B6-M76C; mice. These data demonstrate that changes in genetic background may have a dramatic effect on sensitivity to classic antidepressants from the Selective Serotonin Reuptake Inhibitors family. Additionally, the results provide new evidence confirming our idea on the disrupted functioning of 5-HT_1A autoreceptors in the brains of B6-M76C mice, suggesting these mice as a model of antidepressant resistance.     

Switching Ion Binding Selectivity of Thiacalix[4]arene Monocrowns at Liquid–Liquid and 2D-Confined Interfaces

Understanding the interaction of ions with organic receptors in confined space is of fundamental importance and could advance nanoelectronics and sensor design. In this work, metal ion complexation of conformationally varied thiacalix[4]monocrowns bearing lower-rim hydroxy (type I), dodecyloxy (type II), or methoxy (type III) fragments was evaluated. At the liquid–liquid interface, alkylated thiacalixcrowns-5(6) selectively extract alkali metal ions according to the induced-fit concept, whereas crown-4 receptors were ineffective due to distortion of the crown-ether cavity, as predicted by quantum-chemical calculations. In type-I ligands, alkali-metal ion extraction by the solvent-accessible crown-ether cavity was prevented, which resulted in competitive Ag⁺ extraction by sulfide bridges. Surprisingly, amphiphilic type-I/II conjugates moderately extracted other metal ions, which was attributed to calixarene aggregation in salt aqueous phase and supported by dynamic light scattering measurements. Cation–monolayer interactions at the air–water interface were monitored by surface pressure/potential measurements and UV/visible reflection–absorption spectroscopy. Topology-varied selectivity was evidenced, towards Sr²⁺ (crown-4), K⁺ (crown-5), and Ag⁺ (crown-6) in type-I receptors and Na⁺ (crown-4), Ca²⁺ (crown-5), and Cs⁺ (crown-6) in type-II receptors. Nuclear magnetic resonance and electronic absorption spectroscopy revealed exocyclic coordination in type-I ligands and cation–π interactions in type-II ligands.     

UVS112—A gene involved in excision repair of yeast

In this study we show that the previously described uvs112 (uvs12) mutation blocks one of the steps of the excision repair pathway. The properties of this mutation permit the assignment of the UVS112 gene to the RAD3 epistasis group. It was established that the uvs112 mutation caused a 2·5-fold reduction in the number of recombinants produced by conversion and also significantly increased the frequency of mitotic crossing-over in interplasmid recombination. Tetrad analysis placed the UVS112 gene on the left arm of chromosome IX, approximately 20 cM from HIS5. The analysis of mitotic recombination revealed that UVS112 lies between HIS6 and HIS5, and is an allele of the RAD25 gene.     

Hydrodesulfurization of hindered dibenzothiophenes on bifunctional NiMo catalysts supported on zeolite–alumina composites

A series of NiMo catalysts supported on HNaY(x)–Al₂O₃ composites with different amounts of HNaY zeolite (x = 0, 5, 10, 20 and 100 wt.% of HNaY) was prepared and tested in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyl-DBT (4,6-DMDBT). The catalysts were characterized by N₂ physisorption, X-ray diffraction (XRD), FT-IR spectroscopy of pyridine and nitrogen oxide adsorption (Py and NO-FT-IR), temperature-programmed reduction (TPR), scanning electron microscopy (SEM-EDX) and high-resolution transmission electron microscopy (HRTEM). It was found that the increase in the zeolite content causes changes in the acidic properties of the catalyst (number of acid sites) as well as in the characteristics of the deposited metallic species (location and dispersion). Different activity trends with the amount of the zeolite were found for the DBT and 4,6-DMDBT hydrodesulfurization on NiMo/HNaY-Al₂O₃ catalysts. As for the HDS of DBT the alumina-supported catalyst presents the highest activity. The incorporation of the zeolite causes an initial drop and then the recovery of activity with zeolite content. In contrast, for the 4,6-DMDBT the HDS activity always increases with zeolite content. These two different catalytic behaviors seem to be due to two opposite effects, which affect the contribution of the reaction routes available for the HDS of each reactant, these effects are: (i) the decrease of MoS₂ dispersion caused by the incorporation of zeolite to the catalyst and (ii) the increase of the proportion of Brönsted acid sites with zeolite content. The reaction product distribution indicates that both types of sites, coordinatively unsaturated sites (CUS) of the MoS₂ and zeolite Brönsted acid sites, participate in the 4,6-DMDBT and DBT transformations.     

Feedback Guided Dynamic Loop Scheduling: Convergence of the Continuous Case

In this article we present some theoretical results concerning the convergence of Feedback Guided Dynamic Loop Scheduling (FGDLS). This method was proposed by Bull (Proceedings of Euro-Par'98, Springer-Verlag, 1998) and further developed by Bull, Ford, Freeman and Hancock (Proceedings of Ninth SIAM Conference on Parallel Processing for Scientific Computing, SIAM Press, 1999). Based on several synthetic examples it has been shown that the method performs well when the workload associated with the parallel loop changes relatively slowly (see Bull et al., 1999). However the question of convergence of the FGDLS method has remained an open question. In this paper we establish sufficient conditions for the convergence of the method.     

Accumulation and desorption of free radicals in emulsion copolymerization

The emulsion copolymerization of styrene with acrylonitrile, seeded on a polybutadiene support and initiated either potassium persulfate or γ-rays has been studied. The original technique of support activation consists of two steps: the start of the copolymerization in the presence of a small fraction of monomers, followed by the addition of the rest of monomers, which leads to a great increase in the reaction rate. The experimental data provide evidence for a new mechanism that takes into account the desorption–reentry of the free oligoradicals into another particle, their transfer to the polybutadiene support, which results in the accumulation of trapped free radicals. As a consequence of free radicals' accumulation, the overall copolymerization rate increases. The accumulation as well as the desorption processes place this type of copolymerization far from Smith–Ewart theory case II.     

The informative-capacity phenomenon of drying drops.

This investigation shows fundamentally good prospects for the information phenomenon of drying drops in medical diagnostics. The advantages of this method include the high information capacity, the rapid result obtainment, the small invasivity, the possibility of use by individuals without special qualification, and the low cost of the device in mass production. These properties create hope that this technology, after widescale clinical tests and the development of a prototype device, can be useful for making a preliminary diagnosis and extracting a risk group for both screening examinations and home use.     

Hydrothermal Solubilization–Hydrolysis–Dehydration of Cellulose to Glucose and 5-Hydroxymethylfurfural Over Solid Acid Carbon Catalysts

Solid acid catalysts based on graphite-like mesoporous carbon material Sibunit were developed for the one-pot solubilization–hydrolysis–dehydration of cellulose into glucose and 5-hydroxymethylfurfural (5-HMF). The catalysts were produced by treating Sibunit surface with three different procedures to form acidic and sulfo groups on the catalyst surface. The techniques used were: (1) sulfonation by H₂SO₄ at 80–250 °C, (2) oxidation by wet air or 32 v/v% solution of HNO₃, and (3) oxidation-sulfonation what meant additional sulfonating all the oxidized carbons at 200 °C. All the catalysts were characterized by low-temperature N₂ adsorption, titration with NaOH, TEM, XPS. Sulfonation of Sibunit was shown to be accompanied by surface oxidation (formation of acidic groups) and the high amount of acidic groups prevented additional sulfonation of the surface. All the Sibunit treatment methods increased the surface acidity in 3–15 times up to 0.14–0.62 mmol g^?1 compared to pure carbon (0.042 mmol g^?1). The catalysts were tested in the depolymerization of mechanically activated microcrystalline cellulose at 180 °C in pure water. The main products 5-HMF and glucose were produced with the yields in the range of 8–22 wt% and 12–46 wt%, respectively. The maximal yield were achieved over Sibunit sulfonated at 200 °C. An essential difference in the composition of main products obtained with solid acid Sibunit carbon catalysts (glucose, 5-HMF) and soluble in water H₂SO₄ catalysts (formic and levulinic acids) as well as strong dependence of the reaction kinetics on the morphology of carbon catalysts argue for heterogenious mechanism of cellulose depolymerization over Sibunit.