Recent progress in thermal analysis of polymers: experimental techniques and a new aspect of temperature in measurement of material properties

Thermal analysis has been utilized in polymer research for a long time and its usefulness is widely recognized. High‐performance commercial instruments have driven significant progress in the thermal studies of polymers. On the other hand, new experimental instruments have been developed in laboratories as well. In this paper attention is paid to the latter category. The laboratory‐made instrument focused on the target material and/or phenomena provides data that are not available from other techniques. Experiments using the temperature modulation technique, which has been successfully utilized in laboratory‐made instruments, are introduced in this paper. The temperature modulation technique reveals a new aspect of temperature useful for studies of material properties. © 2016 Society of Chemical Industry     

Preparation of Yttria-Stabilized Zirconia Thin Films on Strontium-Doped LaMnO3 Cathode Substrates via Electrophoretic Deposition for Solid Oxide Fuel Cells

A yttria-stabilized zirconia (YSZ) thin film on an La_0.8Sr_0.2MnO₃ porous cathode substrate was prepared, using electrophoretic deposition (EPD) to fabricate a solid oxide fuel cell (SOFC). The electrical conductivity of an La_0.8Sr_0.2MnO₃ substrate is satisfactorily high at room temperature; therefore, YSZ powder could be deposited electrophoretically onto an La_0.8Sr_0.2MnO₃ substrate without any extra surface treatment, such as a metal coating. Successive repetition of EPD and sintering was required to obtain a film without gas leakage, because of the thermal expansion coefficient mismatch between the YSZ and the La_0.8Sr_0.2MnO₃ substrate. On the other hand, the electromotive force of the oxygen concentration in the cell that used YSZ film prepared via EPD increased and attained the theoretical value when the number of deposition and calcination cycles was increased. Six or more successive repetitions were required to obtain a YSZ film without gas leakage. A planar-type SOFC was fabricated, using nickel as the anode and YSZ film (∼10 μm thick) that had been deposited onto the La_0.8Sr_0.2MnO₃ substrate as the electrolyte and cathode. The cell exhibited an open circuit voltage of 1.0 V and a maximum power density of 1.5 W/cm². Thus, the EPD method could be used as a colloidal process to prepare YSZ thin-film electrolytes for SOFCs.     

Synthesis of acetonitrile and related compounds from CO-H2-NH3 over Mo/SiO2

In the reaction of CO-H₂-NH₃ on Mo/SiO₂ catalysts, HCN is formed and is considered to be the principal intermediate for the formation of CH₃CN. At low temperature methylamine is also formed.     

Double organic modification by 3‐chloropropyl and methyl groups on pure silica MCM‐41 and Ti‐MCM‐41: efficient catalyst for epoxidation of cyclododecene

Simultaneous surface modification by 3‐chloropropyl and methyl groups on the same Si atoms resulted in hydrophobic and highly ordered mesoporous silica with a very high surface area. ¹³C and ²⁹Si MAS NMR spectra indicate homogeneous grafting of chloropropyl and methyl groups in the silica matrix and this organically modified Ti‐MCM‐41 shows outstanding catalytic performance in the epoxidation of cyclododecene using tert‐butyl hydroperoxide as oxidant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Further Investigations on the Promoting Effect of Mesoporous Silica on Base-Catalyzed Aldol Reaction

Addition of an ordered mesoporous silica to a mixture of an aldol reaction, comprising 4-nitrobenzaldehyde with acetone catalyzed by organic amines, caused significant increase in the reaction rate to afford the β-hydroxyketone in high yield. A cooperative effect between the surface silanol and amine was considered to be the likely reason for the rate-enhancement, which was supported by FTIR spectroscopy.     

Diamond-like carbon thin film with controlled zeta potential for medical material application

With the purpose of applying diamond-like carbon (DLC) thin films as a biocompatible material, we experimented with introducing functional groups such as amino and carboxyl groups to the surface of DLC thin films by plasma surface treatment. From the results, it was found that the contact angle values of the DLC thin films surface were decreased with increasing in the OCO bonded network on the surface. Measurement of the zeta potential when the amounts of the functional groups were varied showed that this successfully varied the zeta potential over the wide range of − 48 mV to + 12 mV. It was found that when carboxyl groups are introduced by O₂ plasma modification of the DLC thin films surface, the zeta potential was lower than that of untreated DLC thin films sample. It was also found that amino groups can be introduced to the DLC thin films surface by NH₃ plasma treatment, the zeta potential was higher than that of untreated DLC thin films sample. This means that zeta potential of the DLC thin films can also be controlled by controlling these two functional groups. Therefore, we have succeeded in developing a multifunctional DLC thin films that does not use polymers and is suitable as a biocompatible material.     

Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants

“Area-wide pinch technology” which consists of R-curve analysis and Site Source Sink Profile (SSSP) analysis, was applied to Kashima industrial area, one of the biggest heavy chemical complexes in Japan. This case study demonstrates that despite the very high efficiency of the individual sites in the complex, there is a huge amount of energy saving potential through energy sharing among the various sites. In addition it was found that appropriate use of the available pinch technology tools and techniques allows an industrial area of enormous scale and complexity to be analysed conveniently. This has resulted in practical area-wide energy saving projects being proposed and implemented.     

Reference values for bisphosphoglycerate mutase protein content and specific activity in human erythrocytes

Cytomegalovirus (CMV) gastritis has been reported in transplant patients. Symptoms are considered nonspecific, and gastroscopy with biopsy is usually performed to establish the diagnosis. Three patients are described here 1 to 3 months after solid organ transplantation, with primary CMV gastritis, confirmed by gastroscopy, histopathologic examination and cultures. The clinical presentation in all three cases was sharp epigastric pain that decreased in a supine position, increased while sitting and further increased when standing or walking. The epigastric pain completely resolved after treatment with ganciclovir. To the best of our knowledge, such postural epigastric pain has not been described as a specific symptom in any other clinical entity and may be a unique sign of primary CMV gastritis.     

Operation of power distribution systems by using a section management method

High-voltage power distribution systems are connected in a branch configuration so as to meet the need for highly reliable power service. When service is interrupted the faulty section is automatically isolated and the power supply is rerouted from an adjacent power distribution system thereby minimizing the service interruption area. The faulty section in the power distribution system is quickly located by means of time relays installed in the switchgears. The settings of those time relays, however, must be monitored constantly. For this reason, we have proposed a “section management method” which can supervise each section of the power distribution system. From this method, we developed a prototype automated distribution system for overall management of time relays through the use of internal software, facilities and customer feedback. This paper describes the section management of power distribution systems.