Pentadiagonal alternating-direction-implicit finite-difference time-domain method for two-dimensional Schrödinger equation

In this paper, we have proposed a pentadiagonal alternating-direction-implicit (Penta-ADI) finite-difference time-domain (FDTD) method for the two-dimensional Schrödinger equation. Through the separation of complex wave function into real and imaginary parts, a pentadiagonal system of equations for the ADI method is obtained, which results in our Penta-ADI method. The Penta-ADI method is further simplified into pentadiagonal fundamental ADI (Penta-FADI) method, which has matrix-operator-free right-hand-sides (RHS), leading to the simplest and most concise update equations. As the Penta-FADI method involves five stencils in the left-hand-sides (LHS) of the pentadiagonal update equations, special treatments that are required for the implementation of the Dirichlet’s boundary conditions will be discussed. Using the Penta-FADI method, a significantly higher efficiency gain can be achieved over the conventional Tri-ADI method, which involves a tridiagonal system of equations.     

Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.     

A gas chromatography–mass spectrometry method for the detection of chlorpyrifos contamination in palm-based fatty acids

Chlorpyrifos is a Malaysian Pesticide Board-approved organophosphate insecticide, which may become concentrated during fractionation. The objective of this project was to develop and validate a method to detect and quantify chlorpyrifos in food-grade fatty acids ingredients, e.g. caprylic-capric acid mixture and oleic acid (OLA) used to synthesize triacylglyceride based food additives and in the cosmetic industry. A selective ion monitoring gas chromatography–mass spectrometry method with a matrix-matched calibration curve calibration was selected. The method involved the direct injection of chlorpyrifos spiked into the fatty acids matrix. The percentage recoveries at spiking levels of 0.5, 0.75, 2.5, and 4.0 μg g⁻¹ of chlorpyrifos in OLA and caprylic-capric acid ranged from 85.7%–101.1% to 97.2%–112%, respectively, with a relative standard deviation of within 11%. The intra-day and inter-day precision were deemed acceptable as indicated by an relative SD value of within 10%. A good linear relationship with a coefficient of correlation >0.99 for the matrix-matched calibration was achieved between 0.5 and 5 μg g⁻¹. The limit of detection and limit of quantification corresponded to 0.5 μg g⁻¹ for OLA and 0.55 μg g⁻¹ for caprylic-capric acid.     

Topography of the flank wear surface

In many applications, topography represents the main external features of a surface. This paper describes the topography of the flank wear surface and also presents the relationship between the maximum flank wear and the topography parameters (roughness parameters) of the flank wear surface during the turning operation. A modern CNC lathe machine (Okuma LH35-N) was used for the machine turning operation. Three-dimensional surface roughness parameters of the flank wear surface were measured by a surface texture instrument (from Talysurf series) using surface topography software (Talymap). Based on the resulting experimental data, it is found that as the flank wear increases, the roughness parameters (sR_a, sR_q, and sR_t) on the flank surface increase significantly. The greater the roughness value of the flank wear surface, the higher the friction of the tool on the workpiece and the greater the heat generation that will occur, thus ultimately causing tool failure. On the other hand, positive skewness (sR_sk) indicates the presence of a small number of spikes on the flank surface of the cutting tool, which could quickly wear off during the machining process.     

Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon

In cutting of brittle materials, experimentally it was observed that there is a ductile–brittle transition when the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius of the zero rake angle. However, how the crack is initiated in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has not been fully understood. In this study, the crack initiation in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has been simulated using the Molecular Dynamics (MD) method on nanoscale cutting of monocrystalline silicon with a non-zero edge radius tool, from which, for the first time, a peak deformation zone in the chip formation zone has been found in the transition from ductile mode to brittle mode cutting. The results show that as the undeformed chip thickness is larger than the cutting edge radius, in the chip formation zone there is a peak deformation depth in association with the connecting point of tool edge arc and the rake face, and there is a crack initiation zone in the undeformed workpiece next to the peak deformation zone, in which the material is tensile stressed and the tensile stress is perpendicular to the direction from the connecting point to the peak. As the undeformed chip thickness is smaller than the cutting edge radius, there is no deformation peak in the chip formation zone, and thus there is no crack initiation zone formed in the undeformed workpiece. This finding explains well the ductile–brittle transition as the undeformed chip thickness increases from smaller to larger than the tool cutting edge radius.     

Analysis and reduction of data spikes in thin client computing

While various optimization techniques have been used in existing thin client systems to reduce network traffic, the screen updates triggered by many user operations will still result in long interactive latencies in many contemporary network environments. Long interactive latencies have an unfavorable effect on users’ perception of graphical interfaces and visual contents. The long latencies arise when data spikes need to be transferred over a network while the available bandwidth is limited. These data spikes are composed of a large amount of screen update data produced in a very short time. In this paper, we propose a model to analyze the packet-level redundancy in screen update streams caused by repainting of graphical objects. Using this model we analyzed the data spikes in screen update streams. Based on the analysis result we designed a hybrid cache-compression scheme. This scheme caches the screen updates in data spikes on both server and client sides, and uses the cached data as history to better compress the recurrent screen updates in possible data spikes. We empirically studied the effectiveness of our cache scheme on some screen updates generated by one of the most bandwidth-efficient thin client system, Microsoft Terminal Service. The experiment results showed that this cache scheme with a cache of 2M bytes can reduce 26.7%–42.2% data spike count and 9.9%–21.2% network traffic for the tested data, and can reduce 25.8%–38.5% noticeable long latencies for different types of applications. This scheme costs only a little additional computation time and the cache size can be negotiated between the client and server.     

Meta-analysis of linkage data under worst-case conditions: a demonstration using the human OB region

To date, few methods have been developed explicitly for meta-analysis of linkage analyses. Moreover, the methods that have been developed or suggested generally depend on certain ideal situations and have not been widely applied. In this article, we apply standard statistical theory and meta-analytic techniques in novel ways to five published papers discussing the evidence of linkage of body mass index (BMI) to the region of the human genome containing the OB gene. These methods are "inference based," meaning that they allow one to make statements about the statistical significance of the entire body of evidence. As currently developed, they do not allow specific statements to be made about the amount of variance explained by any putative locus or allow precise confidence intervals to be placed around the putative location of a linked locus. By applying these techniques to the literature on linkage in the human OB gene region, we are able to show that the evidence for linkage somewhere in the region is extremely strong (P = 1.5 x 10[-5]).     

Retardation of human drug-resistant HL-60 cell in G1 phase and induction of sensitive cell to apoptosis by cyclosporine A

To further study the relationship between resistance to apoptosis and drug resistance in harringtonine-resistant HL-60 cells (HR20), cyclosporine A (CsA) 20, 10 micrograms.ml-1 was shown to induce the sensitive HL-60 cells to apoptosis, showing a typical DNA "ladder" band. But the same concentrations of CsA retarded the HR20 cells in G1 phase and could not induce the cells to apoptosis. The cellular daunorubicin accumulation increased when HR20 cells were treated with low concentration of CsA and the reversal of drug resistance by CsA was unrelated to the retardation of cell cycle progression. High phosphorylation of about 50 kDa protein occured when HR20 cells were treated with CsA 10 micrograms.ml-1. The results domonstrate that cyclosporine A retarded the harringtonine-resistant HL-60 cells in G1 phase but induced HL-60 cells to apoptosis, and the retardation was unrelated to drug resistance.     

A scrape-through piezoelectric MEMS energy harvester with frequency broadband and up-conversion behaviors

We propose a MEMS piezoelectric energy harvester with a wide operating frequency range by incorporating a high-frequency piezoelectric cantilever and a metal base as the top and bottom stoppers with a low-frequency piezoelectric cantilever. Frequency up-conversion of the piezoelectric energy harvester is realized when the low-frequency piezoelectric cantilever impacts and scrapes through the high-frequency piezoelectric cantilever. For an input acceleration of 0.6?g, with top and bottom stopper distances of 0.75 and 1.1?mm, respectively, the operating frequency ranges from 33 to 43?Hz. The output voltage and power up to 95?mV and 94 nW can be achieved. Experimental results indicate that the frequency up-conversion mechanism significantly improves the effective power.