Grain-boundary segregation and precipitation of boron in 0.2 percent carbon steels

The segregation and precipitation of boron have been studied in two 0.2C−0.6Mn0.−5Mo steels containing (nominally) 10 and 50 ppm B. After heating to 1260 δC, samples were air-cooled to 870 °C and then held for times between 0 and 5000 seconds. Additional samples were heated to 1260 °C, air-cooled to 900 °C, reduced in thickness by 50 pct, and then held for various times at 870 °C, as above. The distributions of boron under these various conditions were investigated qualitatively by an autoradiographic technique. In both steels, segregation and/or precipitation of boron at austenite grain boundaries was detected under all conditions examined. Precipitation of iron borocarbide particles occurred along austenite grain boundaries in the 50 ppm B steel during cooling to the holding temperature of 870 °C, while in the 10 ppm B steel, such precipitation occurred only after long times at 870 °C. Mechanical properties of single-pass-rolled samples were measured after tempering to assess the effects of borocarbide precipitation on notch toughness. Such precipitation lowered the Charpy upper shelf energy and increased the transition temperature.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

The influence of strontium on porosity formation in Al-Si alloys

Strontium modification is known to alter the amount, characteristics, and distribution of porosity in Al-Si castings. Although many theories have been proposed to account for these effects, most can be considered inadequate because of their failure to resolve contradictions and discrepancies in the literature. In an attempt to critically appraise some of these theories, the amount, distribution, and morphology of porosity were examined in sand-cast plates of Sr-free and Sr-containing pure Al, Al-1 wt pct Si, and Al-9 wt pct Si alloys. Statistical significance testing was used to verify apparent trends in the porosity data. No apparent differences in the amount, distribution, and morphology of porosity were observed between Sr-free and Sr-containing alloys with no or very small eutectic volume fractions. However, Sr modification significantly changed the amount, distribution, and morphology of porosity in alloys with a significant volume fraction of eutectic. The addition of Sr reduced porosity in the hot spot region of the casting, and the pores became well dispersed and rounded. This result can be explained by considering the combined effect of the casting design and the differences in the pattern of eutectic solidification between unmodified and Sr-modified alloys.     

Controlling insulin-like growth factor activity and the modulation of insulin-like growth factor binding protein and receptor binding

The insulin-like growth factors (IGF) and insulin perform seemingly unique roles by causing the same metabolic effect: cellular hypertrophy. Although overlapping, there are different consequences to cellular hypertrophy induced by IGF and that induced by insulin. The IGF enhance the cell hypertrophy that is requisite for cell survival, hyperplasia, and differentiation, and insulin enhances cell hypertrophy primarily as a means to increase nutrient stores. The effects of IGF and insulin are controlled by the segregation of their receptors between different cell types. A model is discussed that describes the need for three hormones (IGF-I, IGF-II, and insulin) to control nutrient partitioning. Insulin receptor localization, as well as an episodic mode of secretion, evolved to perform the short-term action of clearing excess nutrients from the circulation. In contrast, a complex and interactive set of factors ensure that maximal IGF activity occurs only when conditions are optimal for growth. A relatively invariant rate of secretion and the IGF binding proteins serve to maintain a large mutable pool of IGF. This pool exists to ensure a constant supply of IGF to maintain the basal metabolic rate and to ensure that, once a cell begins to proliferate or differentiate, adequate exposure is available to complete the process even after severe short-term physiological insults. The IGF concentrations only change in response to prolonged differences in protein and energy availabilities, environmental and body temperatures, and external stress. Also, evidence is now emerging that describes a discrete role for trace nutrients in the regulation of IGF activity. In this latter regard, zinc has the notable role of targeting IGF binding proteins to the cell surface. New data are presented showing that zinc also changes the affinity of the type 1 IGF receptor and cell-associated IGF binding proteins to optimize IGF activity.     

Factors affecting contrasting results between self-reported and performance-based levels of physical limitation

Molecular electrostatic potential (MEP) maps of certain 3-methoxy flavone derivatives having different anti-picornavirus activities have been studied. Geometries of the molecules were optimised and charge distributions computed using the AM1 molecular orbital method. Hybridization displacement charges (HDC) were combined with the L?wdin charge distributions to compute the MEP maps. Reliability of the method of computing MEP maps was tested by studying certain other molecules for which ab initio MEP results are available. The anti-picornavirus activities of the flavones have been shown to be related with negative MEP values in two regions, one near the 3-methoxy group and another in a diagonally opposite region near the substituent attached to the C7 atom of the molecules.     

Congenital adrenal hyperplasia presenting as massive adrenal incidentalomas in the sixth decade of life: report of two patients with 21-hydroxylase deficiency

Divergent recommendations exist regarding the evaluation of adrenal incidentalomas. Recent data have indicated a prevalence of adrenal tumors of 71% in nonclassical congenital adrenal hyperplasia (CAH) and unmasked heterozygotes. These data expand the differential diagnosis of such incidental tumors and substantially modify the approach to their evaluation. We present two patients, female pseudohermaphrodites with the simple virilizing form of CAH and 21-hydroxylase deficiency, who functioned successfully as married phenotypic males. Both came to medical attention in the sixth decade by virtue of massive adrenal incidentalomas encountered in the evaluation of recurrent urinary tract infections. Each had a 46, XX karyotype, no palpable testes, and markedly elevated baseline levels of 17-hydroxyprogesterone (17-OH Prog) of 6086 ng/dL and 6750 ng/dL. Both responded appropriately to dexamethasone suppression with reduction of 17-OH Prog, androgens and, in the second patient, ACTH to normal or near normal levels. Histologic and autopsy examination of the first patient's tumor and computed tomographic characteristics of the second revealed a benign adenoma and myelolipoma respectively. We extend and confirm previous recommendations that CAH be included in the differential diagnosis of adrenal incidentaloma and that baseline 17-OH Prog. levels be obtained, with ACTH stimulation if necessary, to diagnose the presence of nonclassical CAH.