EVAPORATION FROM POROUS MEDIA: A CAPILLARY MODEL OF A PENETRATING FRONT

A capillary tube model was solved to investigate the influence of mass transfer coefficient, temperature, and front depth on the evaporation rate during the penetrating-front period of water-filled porous media dried in hot air. The results show that increasing the flow rate of the drying air is not so efficient as increasing the sample temperature. Due to attenuating diffusion rate, the rate of liquid front migration decreases with time. The calculations explain the falling rate period behavior of sandstone heated at 121°C. Trends depicted by the model may be useful for the design of heating conditions for drying processes.     

Adsorption on activated carbon in countercurrent flow: An experimental study

The work describes adsorption experiments from aqueous solutions on activated carbon using a counter-current adsorber. Phenol and paranitrophenol were used for single component adsorption and molasses colour for multicomponent adsorption experiments. Isotherms were determined using simple equilibrium experiments. Three different techniques were used for determination of the kinetics. These were finite bath, infinite bath and fixed bed experiments. A mathematical model for countercurrent adsorption was tested. The model includes the effect of film diffusion and pore diffusion as well as surface diffusion, and can handle systems with a nonlinear isotherms. Kinetic data in the form of an average diffusivity in the carbon determined from the finite bath experiments and isotherm data did not predict the operation of the countercurrent column well. Data from the fixed bed experiments predicted countercurrent column operation much better. This is deemed to be due to inhomogeneities in the carbon used, resulting in a fairly quick initial uptake of the main part of the solute and a slower uptake of a minor amount.     

Hydrodynamics and steel tube wastage in a fluidized bed at elevated temperature

Hydrodynamic measurements were made in a bubbling fluidized bed operated at 550°C at three different excess gas velocities (0.15, 0.40 and ). The bed has a cross-sectional area of with an immersed tube bank consisting of 59 horizontal stainless steel tubes (AISI 304L), 21 of which are exchangeable, thus allowing erosion studies. Capacitance probe analysis was used to determine the mean bubble rise velocity, the mean bubble frequency, the mean pierced bubble length, the mean bubble volume fraction and the mean visible bubble flow rate. Tube wastage was calculated from roundness profiles obtained by stylus profilometry.A redistribution of the bubble flow towards the center of the bed occurs when the excess gas velocity is increased. Measurements along a target tube, situated next to the capacitance probe, usually show greater material wastage at the central part of the tube, since the mean bubble rise velocity and the mean visible bubble flow rate are higher there. It is suggested that the greater material degradation is also an effect of the through-flow of a particle-transporting gas stream in the bubbles. With increasing height above the distributor plate the circumferential wastage profiles for the lowest excess gas velocity show a gradual change from an erosion pattern with one maximum (Type B behavior) to a pattern with two maxima (Type A behavior). Power spectral density distributions of the fluctuating pressure signals show that this is a result of the formation of larger bubbles, when the fluidization regime is changed in the upper part of the bed. At the highest excess gas velocity the bubble flow becomes more constrained due to a more rapid coalescence of the bubbles and the tubes show Type A wastage profiles throughout the bed.     

HOW LIQUIDS SPREAD ON SOLIDS

A theory of the wetting of solids by liquids is put forward. The theory accounts for capillary pressure gradient, gravitational potential gradient, surface tension gradient, disjoining pressure gradient driving forces of flow in thick thin-films and of surface diffusion in thin thin-films. Disjoining pressure stems from the way intermolecular forces aggregate in submicroscopically thin films. For thick thin-films of slowly varying thickness the lubrication approximation to velocity distributions is appropriate. With this approximation the spontaneous, unsteady, two-dimensional spreading of liquid is shown to be governed by a nonlinear convective-diffusion equation for the evolution of the film thickness profile. The predictions of the theory agree with Marmur and Lelah's (1980, 1981) observations of water drops spreading on glass and with Bascom, Cottington and Singleterry's (1964) and Ludviksson and Lightfoot's (1971) observations of oils spreading on high energy surfaces. The theory is used to analyze Derjaguin and co-workers' (1944, 1957, 1970) blowing-off experiments designed to measure thin-film rheology. The theory is also used to buttress the proposition that much contact angle hysteresis is due simply to slow attainment of equilibrium.     

Kinetic analysis of cellular internalization and expulsion of unstructured D-chirality cell penetrating peptides

Most cell penetrating peptides (CPPs) are unstructured and susceptible to proteolytic degradation. One alternative is to incorporate D-chirality amino acids into unstructured CPPs to allow for enhanced uptake and intracellular stability. This work investigates CPP internalization using a series of time, concentration, temperature, and energy dependent studies, resulting in a three-fold increase in uptake and 50-fold increase in stability of D-chirality peptides over L-chirality counterparts. CPP internalization occurred via a combination of direct penetration and endocytosis, with a percentage of internalized CPP expelling from cells in a time-dependent manner. Mechanistic studies identified that cells exported the intact internalized D-chirality CPPs via an exocytosis independent pathway, analogous to a direct penetration method out of the cells. These findings highlight the potential of a D-chirality CPP as bio-vector in therapeutic and biosensing applications, but also identify a new expulsion method suggesting a relationship between uptake kinetics, intracellular stability, and export kinetics.     

The Inhibitive Effect of Traces of SO2 on the Oxidation of Iron

The oxidation of Fe was investigated at 500–700°C in the presence of O₂ with 0–1000 ppm SO₂. The exposures were carried out in a thermobalance and lasted for 24 h. The oxidized samples were investigated by grazing-angle XRD, SEM/EDX, GDOES and XPS. The rate of oxidation of pure iron is slowed down by traces of O₂ in O₂ below 600°C while SO₂ has no effect on oxidation rate at higher temperatures. Exposure to SO₂<600°C resulted in the formation of small amounts of sulfate at the gas/oxide interface. In addition, sulfur, probably sulfide, accumulated at the metal/oxide interface. The influence of SO₂ on oxidation rate is attributed to surface sulfate. The sulfur distribution in the scale is rationalized in terms of the thermodynamic stability of compounds in the Fe–O–S system. Exposure to SO₂ caused the formation of hematite whiskers.     

The influence of thermal annealing on residual stresses and mechanical properties of arc-evaporated TiCxN1−x (x=0, 0.15 and 0.45) thin films

We report the stress relaxation behavior of arc-evaporated TiC_xN_1−x thin films during isothermal annealing between 350 and 900°C. Films with x=0, 0.15, and 0.45, each having an initial compressive intrinsic stress σ_int=−5.4 GPa, were deposited by varying the substrate bias V_s and the gas composition. Annealing above the deposition temperature leads to a steep decrease in the magnitude of σ_int to a saturation stress value, which is a function of the annealing temperature. The corresponding apparent activation energies for stress relaxation are E_a=2.4, 2.9, and 3.1 eV, for x=0, 0.15, and 0.45, respectively. TiC_0.45N_0.55 films with a lower initial stress σ_int=−3 GPa, obtained using a high substrate bias, show a higher activation energy E_a=4.2 eV. In all the films, stress relaxation is accompanied by a decrease in defect density indicated by the decreased width of X-ray diffraction peaks and decreased strain contrast in transmission electron micrographs. Correlation of these results with film hardness and microstructure measurements indicates that the stress relaxation is a result of point-defect annihilation taking place both during short-lived metal-ion surface collision cascades during deposition, and during post-deposition annealing by thermally activated processes. The difference in E_a for the films of the same composition deposited at different V_s suggests the existence of different types of point-defect configurations and recombination mechanisms.     

Computing Minimum Area Homologies

Calculating and categorizing the similarity of curves is a fundamental problem which has generated much recent interest. However, to date there are no implementations of these algorithms for curves on surfaces with provable guarantees on the quality of the measure. In this paper, we present a similarity measure for any two cycles that are homologous, where we calculate the minimum area of any homology (or connected bounding chain) between the two cycles. The minimum area homology exists for broader classes of cycles than previous measures which are based on homotopy. It is also much easier to compute than previously defined measures, yielding an efficient implementation that is based on linear algebra tools. We demonstrate our algorithm on a range of inputs, showing examples which highlight the feasibility of this similarity measure.     

Distributed non-cooperative robust MPC based on reduced-order models

In this paper, a non-cooperative distributed MPC algorithm based on reduced order model is proposed to stabilize large-scale systems. The large-scale system consists of a group of interconnected subsystems. Each subsystem can be partitioned into two parts: measurable part, whose states can be directly measured by sensors, and the unmeasurable part. In the online computation phase, only the measurable dynamics of the corresponding subsystem and neighbour-to-neighbour communication are necessary for the local controller design. Satisfaction of the state constraints and the practical stability are guaranteed while the complexity of the optimization problem is reduced. Numerical examples are given to show the effectiveness of this algorithm.     

Using multiple endmember spectral mixture analysis to retrieve subpixel fire properties from MODIS

The Moderate-Resolution Imaging Spectroradiometer (MODIS) sensors on NASA's Terra and Aqua satellites image most of the Earth multiple times each day, providing useful data on fires that cannot be practically acquired using other means. Unfortunately, current fire products from MODIS and other sensors leave large uncertainties in measurements of fire sizes and temperatures, which strongly influence how fires spread, the amount and chemistry of their gas and aerosol emissions, and their impacts on ecosystems. In this study, we use multiple endmember spectral mixture analysis (MESMA) to retrieve subpixel fire sizes and temperatures from MODIS, possibly overcoming some limitations of existing methods for characterizing fire intensities such as estimating the fire radiative power (FRP). MESMA is evaluated using data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) to assess the performance of FRP and MESMA retrievals of fire properties from a simultaneously acquired MODIS image, for a complex of fires in Ukraine from August 21, 2002. The MESMA retrievals of fire size described in this paper show a slightly stronger correlation than FRP does to fire pixel counts from the coincident ASTER image. Prior to this work, few studies, if any, had used MESMA for retrieving fire properties from a broad-band sensor like MODIS, or compared MESMA to higher-resolution fire data or other measures of fire properties like FRP. In the future, MESMA retrievals could be useful for fire spread modeling and forecasting, reducing hazards that fires pose to property and health, and enhancing scientific understanding of fires and their effects on ecosystems and atmospheric composition.