Counting clicks and beeps: Exploring numerosity based haptic and audio PIN entry

Haptic and audio cues now appear commonly in computer interfaces, partially due to inherent advantages such as their support for eyes-free interaction. Their invisible, unobservable nature also makes them ideal candidates for security interfaces in which users have to enter secret information such as passwords. In particular, researchers have explored this idea through the design of PIN entry authentication systems based on multi-modal combinations of visual and non-visual content or on the recognition of small sets of unimodal haptic or audio stimuli. This paper highlights the benefits and performance limitations of these approaches and introduces an alternative based on unimodal audio or haptic temporal numerosity – the ability to accurately and rapidly determine the number of cues presented in rapid temporal succession. In essence, in a numerosity interface, rather than recognizing distinct cues, users must count the number of times that a single cue occurs. In an iterative process of design and evaluation, three prototypes implementing this concept are presented and studies of their use reported. The results show the fastest PIN entry times and lowest error rates to be 8 s and 2%, figures that improve substantially on previous research. These results are attained while maintaining low levels of workload and substantial resistance to observation attack (as determined via camera attack security studies). In sum, this paper argues that unimodal audio and haptic numerosity is a valuable and relatively unexplored metaphor for non-visual input and demonstrates the validity of this claim in the demanding task of unobservable authentication systems.     

Effects of user age and target-expansion methods on target-acquisition tasks using a mouse

Target expansion, i.e., the increase of target size according to cursor movement, can be a practical scheme to improve the usability of target-selection tasks using a mouse. This study examined the effects of different user age groups and target-expansion methods on target-acquisition tasks with grouped icons. Twenty-eight subjects performed acquisition tasks under eight experimental conditions: combinations of four expansion areas (no, one-icon, fish-eye, and group expansion) and two expansion techniques (occlusion and push). Older users took longer to acquire targets than younger users; however, they showed no significant difference in accuracy. Target expansion did not substantially improve performance speed compared to the static condition. However, the error rate was lowest when group area was expanded with the push technique, and both age groups were most satisfied with one-icon area expansion with the occlusion technique. We suggest alternative guidelines in designing target-expansion schemes.     

Comparison between cyclic voltammetry and chronoamperometry when coupled with EQCM for the study of the SEI on a carbon film electrode

Cyclic voltammetry (CV) and chronoamperometry have been conducted with the electrochemical quartz crystal microbalance (EQCM) to characterize electron-beam deposited carbon film electrodes in LiClO₄-containing mixed electrolytes of ethylene carbonate (EC) and dimethyl carbonate (DMC). For a system whose electrolyte viscosity changes in the course of experiments, such as the above combination of electrode and electrolyte, the mass change per mole of electrons transferred (MPE) of the species on quartz crystals depends on the potential scan rate of CV. Chronoamperometry with a short period is more desirable for the estimation of the MPE of the solid electrolyte interphase (SEI) because the viscosity-induced frequency change, which hinders the correct MPE estimation, constitutes a small portion of the measured frequency change under this experimental condition.     

Fabrication of Al/AlN composites by in situ reaction

The tensile properties and microstructures of various Al alloys fabricated by the pressureless infiltration method under a nitrogen atmosphere were examined. The spontaneous infiltration of molten metal into the powder bed occurred at 800 °C for 1 h under a nitrogen atmosphere. As a result, it was possible to fabricate Al alloys reinforced with AlN particles formed by in situ reaction. A significant strengthening even in the control alloy occurred due to the formation of in situ AlN particle even without an addition of artificial reinforcement. Strength values of the control alloy were increased with decreasing Al powders in bottom powders bed. In addition, tensile strength in Al–Mg alloys was increased with Mg content.     

A new LDPC decoding algorithm aided by segmented cyclic redundancy checks for magnetic recording channels

We introduce a new low-density parity-check (LDPC) decoding algorithm that exploits the cyclic redundancy check (CRC) information of data segments. By using the error detection property of the CRC, we can successively decode data segments of a codeword corrupted by random errors and erasures. The key idea is that the messages from the variable nodes with correct checksum are fixed to deterministic log likelihood ratio values during LDPC iterative decoding. This approach improves the decoding speed and codeword error rate without significant modification of the LDPC decoding structure. Moreover, the CRC is also used for an early stopping criterion of LDPC decoding. Simulation results verify our claims.     

Preparation of AZ91D Slurries for Semi-Solid Forming Using Al8 ( Mn, Fe) 5 Precipitates

During the solidification of the AZ91D-alloys, the Al8(Mn, Fe)5 phase is generally precipitated in the melt in advance of the precipitation of the primary α-Mg. The basic principle for manufacturing AZ91D-alloy slurries for semi solid forming is to use the Al8(Mn, Fe)5 precipitates as the heterogeneous nucleation sites for primary α-Mg phases. Microscopic analysis for the location of the Al8(Mn, Fe)5 precipitate explains that the Al8(Mn, Fe)5 precipitate is the effective heterogeneous nucleation site for the primary α-Mg phase. It was also observed that increase of the Mn content in the melt and the cooling rate below to the solid/liquid two-phase region resulted in smaller and more globular primary α-Mg due to the increase of heterogeneous nucleation sites. It was found that the average α-Mg diameter grew as a function of t0.278, where t is the holding time at the solid/liquid two-phase region. This would be attributed to the Ostwald type ripening and coalescence between primary α-Mg phases. The cooling rate below to the solid/liquid two-phase region, Mn content in AZ91D alloy, and the holding time and temperature affected on the quality of slurry.     

Influences of the dynamic strain aging on the J–R fracture characteristics of the ferritic steels for reactor coolant piping system

The leak-before-break (LBB) design of the piping system for nuclear power plants has been based on the premise that the leakage due to the through-wall crack can be detected by using leak detection systems before a catastrophic break. The piping materials are required to have excellent J–R fracture characteristics. However, where ferritic steels for reactor coolant piping systems operate at the temperatures where dynamic strain aging (DSA) could occur, the fracture resistance could be reduced with the influence of DSA under dynamic loading. Therefore, in order to apply the LBB design concept to the piping system under seismic loading, both static and dynamic J–R characteristics must be evaluated.Materials used in this study are SA516 Gr.70 for the elbow pipe and SA508 Cl.1a for the main pipe and their welding joints. The crack extension during the dynamic and the static J–R tests was measured by the direct current potential drop (DCPD) and the compliance method, respectively. This paper describes the influences of the dynamic strain aging on the J–R fracture characteristics with the loading rate of the pipe materials and their welding joints.     

HDAC8-Selective Inhibition by PCI-34051 Enhances the Anticancer Effects of ACY-241 in Ovarian Cancer Cells

HDAC6 is overexpressed in ovarian cancer and is known to be correlated with tumorigenesis. Accordingly, ACY-241, a selective HDAC6 inhibitor, is currently under clinical trial and has been tested in combination with various drugs. HDAC8, another member of the HDAC family, has recently gained attention as a novel target for cancer therapy. Here, we evaluated the synergistic anticancer effects of PCI-34051 and ACY-241 in ovarian cancer. Among various ovarian cancer cells, PCI-34051 effectively suppresses cell proliferation in wild-type p53 ovarian cancer cells compared with mutant p53 ovarian cancer cells. In ovarian cancer cells harboring wild-type p53, PCI-34051 in combination with ACY-241 synergistically represses cell proliferation, enhances apoptosis, and suppresses cell migration. The expression of pro-apoptotic proteins is synergistically upregulated, whereas the expressions of anti-apoptotic proteins and metastasis-associated proteins are significantly downregulated in combination treatment. Furthermore, the level of acetyl-p53 at K381 is synergistically upregulated upon combination treatment. Overall, co-inhibition of HDAC6 and HDAC8 through selective inhibitors synergistically suppresses cancer cell proliferation and metastasis in p53 wild-type ovarian cancer cells. These results suggest a novel approach to treating ovarian cancer patients and the therapeutic potential in developing HDAC6/8 dual inhibitors.