Temporal fairness guarantee in multi-rate wireless LANs for per-flow protection

Wireless LAN technologies such as IEEE 802.11a and 802.11b support high bandwidth and multi-rate data transmission to match the channel condition (i.e., signal to noise ratio). While some wireless packet fair queuing algorithms to achieve the per-flow throughput fairness have been proposed, they are not appropriate for guaranteeing QoS in multi-rate wireless LAN environments. We propose a wireless packet scheduling algorithm that uses the multi-state (multi-rate) wireless channel model and performs packet scheduling by taking into account the channel usage time of each flow. The proposed algorithm aims at per-flow protection by providing equal channel usage time for each flow. To achieve the per-flow protection, we propose a temporally fair scheduling algorithm called Contention-Aware Temporally fair Scheduling (CATS) which provides equal channel usage time for each flow. Channel usage time is defined as the sum of the packet transmission time and the contention overhead time due to the CSMA/CA mechanism. The CATS algorithm provides per-flow protection in wireless LAN environments where the channel qualities of mobile stations are dynamic over time, and where the packet sizes are application-dependent. We also extend CATS to Decentralized-CATS (D-CATS) to provide per-flow protection in the uplink transmission. Using an NS-2 simulation, we evaluate the fairness property of both CATS and D-CATS in various scenarios. Simulation results show that the throughput of mobile stations with stable link conditions is not degraded by the mobility (or link instability) of other stations or by packet size variations. D-CATS also shows less delay and less delay jitter than FIFO. In addition, since D-CATS can coordinate the number of contending mobile stations, the overall throughput is not degraded as the number of mobile stations increases. This work was supported in part by the Brain Korea 21 project of Ministry of Education and in part by the National Research Laboratory project of Ministry of Science and Technology, 2004, Korea.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

用于便携无线设备的Wireless TrenchTM技术

射频电路设计人员常用的一条经验法则是:有源器件的fT至少应为工作频率的十倍时,现代无线设备中的射频电路才会具有良好的性能.     

Broadly wavelength-tunable external cavity lasers with extremely low power variation over tuning range

Tunable external-cavity lasers with low power variation over a broad tuning range are demonstrated using asymmetric multiple quantum-wells with a wide and flat gain. For a 2.8-/spl mu/m-wide ridge waveguide laser of cavity length 380 /spl mu/m, when used in a grating external cavity and with an antireflection coating on one facet of laser diode chip, the power variation of less than -1 dB is obtained over a range of 80 nm. This extremely low power variation is a direct result of the spectrally flat gain.     

2/spl times/4 optical add-drop module with no difference in propagation length

We developed a micromachined X-type 2/spl times/4 optical add-drop module (OADM) featuring no difference in propagation length. Four pairs of lensed fibers are aligned in "X" position, and four micromirrors are located between the pairs of optical fibers. The OADM was fabricated utilizing a silicon-on-insulator process. Electrostatic comb actuators can be driven up to 90 /spl mu/m to change the light path within 1 ms. The insertion loss and the on-off ratio were less than 3 and 70 dB, respectively. The loss uniformity in every channel was 1.5 dB.     

W-band divide-by-3 frequency divider using 0.1 /spl mu/m InAlAs/InGaAs metamorphic HEMT technology

A W-band divide-by-3 frequency divider with wide bandwidth and low power dissipation is presented using harmonic injection-locking technique. A cascode FET is employed for a self-oscillating second-harmonic mixer which is injection-locked by third-harmonic input to obtain the division order of three. The fabricated frequency divider using 0.1 /spl mu/m GaAs metamorphic HEMT technology shows superior performance such as large bandwidth of 6.1 GHz around 83.1 GHz (7.3%) under small DC power consumption of 12 mW.     

Research activities on next-generation mobile communications and services in Korea

In this article we present a perspective on next-generation mobile communications and services. As a preliminary research work on next-generation mobile communications, we exploit what next-generation mobile services will be (S. Ryu et al., May 2003). We define next-generation mobile services as a hierarchy of services consisting of three different service levels: the service areas, the service functionalities, and the service technologies. We derive these service levels by means of scenario-based analysis. Next we propose conceptual reference network architecture, focusing on the realization of the service technologies. We divide the network into four different parts: a user equipments and access part, a network service provisioning layer part, a network control layer part, and non-mobile network operator service pan, according to characteristics of information and service flows within a network. In this reference network architecture, service elements such as servers, processors, and gateways are placed in each network part to support the derived next-generation mobile services. Finally, we give a brief introduction of research and development activities for next-generation mobile communication systems and services in Korea.     

Harmonic decomposition in PDE-based denoising technique for magnetic resonance electrical impedance tomography

Recent progress in magnetic resonance electrical impedance tomography (MREIT) research via simulation and biological tissue phantom studies have shown that conductivity images with higher spatial resolution and accuracy are achievable. In order to apply MREIT to human subjects, one of the important remaining problems to be solved is to reduce the amount of the injection current such that it meets the electrical safety regulations. However, by limiting the amount of the injection current according to the safety regulations, the measured MR data such as the z-component of magnetic flux density Bz in MREIT tend to have low SNR and get usually degraded in their accuracy due to the nonideal data acquisition system of an MR scanner. Furthermore, numerical differentiations of the measured Bz required by the conductivity image reconstruction algorithms tend to further deteriorate the quality and accuracy of the reconstructed conductivity images. In this paper, we propose a denoising technique that incorporates a harmonic decomposition. The harmonic decomposition is especially suitable for MREIT due to the physical characteristics of Bz. It effectively removes systematic and random noises, while preserving important key features in the MR measurements, so that improved conductivity images can be obtained. The simulation and experimental results demonstrate that the proposed denoising technique is effective for MREIT, producing significantly improved quality of conductivity images. The denoising technique will be a valuable tool in MREIT to reduce the amount of the injection current when it is combined with an improved MREIT pulse sequence.     

Floating-patch MEMS antennas on HRS substrate for millimetre-wave applications

Novel floating-patch micro-electro-mechanical system (MEMS) antennas are proposed for millimetre-wave applications. The floating-patch MEMS antennas are fabricated on a high resistivity silicon (HRS) substrate using surface micromachining technology. Simulation and experimental results for reflection coefficients and radiation patterns are presented.     

Robust performance of the multiloop perturbation compensator

A novel perturbation attenuation method is proposed for robust performance of mechanical systems. First, we give a unified view on a class of existing perturbation observers and define the residual perturbation. In terms of the view and the definition, a new perturbation compensator with multiloop structure is developed. It effectively compensates the perturbation (i.e., model uncertainty and external disturbance) to the plant in a hierarchical and recursive fashion. In the multiloop perturbation compensator (MPEC) proposed, as the number of loops increases, the external disturbance condition for system stability is greatly relaxed and the perturbation attenuation performance is gradually enhanced but the robust stability margin on the modeling error becomes more strict. A recursive algorithm for general n-loop case of the MPEC is derived. By combining the developed robust perturbation compensator with a nominal feedback controller, a robust motion controller is synthesized. Experimental results for XY positioner and 2-DOF robot arms demonstrate the excellent robust tracking performance in spite of arbitrary large perturbation inputs