Phenolic profiles of Turkish olives and olive oils

Phenolic compound distribution of Turkish olive cultivars and their matching olive oils together with the influence of growing region were investigated. One hundred and one samples of olives from 18 cultivars were collected during two crop years from west, south and south‐east regions of Turkey. The olives were processed to oils and both olive and olive oil samples were evaluated for their phenolic compound distribution. The results have shown that main phenolics of Turkish olives were tyrosol, oleuropein, p‐coumaric acid, verbascoside, luteolin 7‐O‐glucoside, rutin, trans cinnamic acid, luteolin, apigenin, cyanidin 3‐O‐glucoside and cyanidin 3‐O‐rutinoside. Oleuropein and trans cinnamic acid were present in higher amounts among all phenolics. Principal component analyses showed that the growing region did not have drastic effect on phenolic profile of olives. The major phenolic compounds of olive oils were tyrosol, syringic acid, p‐coumaric acid, luteolin‐7‐O‐glucoside, trans cinnamic acid, luteolin and apigenin. Luteolin is a predominant phenolic compound in almost all oil samples. Total phenol concentrations of Southeast Anatolian oils were found to be lower than those of the other regions.     

Trans FA and solid fat contents of margarines marketed in Turkey

Trans FA (TFA), solid fat contents (SFC), and slip melting points of 12 different tub and stick margarines marketed in Turkey were examined in this study. No trans isomers were found in four margarines, which suggests they were formulated from interesterified or blended fats and oils. The products with no TFA generally had more short-chain saturated FA, which suggests coconut oil-based oil components. TFA content of the other 10 products varied from 7.7 to 37.8%. Compared to the products formulated in North America, Turkish margarines contain more TFA and have higher SFC.     

Effect of Ozonated Water Treatment on Fatty Acid Composition and Some Quality Parameters of Olive Oil

The organic olives from Çine-Ayd?n (Turkey) were washed with tap or ozonated water for 2 and 5 min, respectively, and pressed to olive oil. The effects of wash treatments on fatty acid composition and several quality parameters of the oils were determined. The maximum values after 2-min ozonated water washes were 9.58 meqO₂/kg, 0.73%, 2.44 and 0.16 for peroxide, free acid, K₂₃₂ and K₂₇₀ values, respectively, which were under the standard limits for extra-virgin olive oil. Five min of ozonated water washes also yielded acceptable results, except for a slight excess on K₂₃₂ value. Ozonated water washes had almost no effect on fatty acid composition.     

Rheological and Microscopic Properties of Fat Blends with Similar Solid Fat Content but Different Trans Composition

In this study, two different groups of fat samples were prepared in a way that samples of each group had different trans fatty acid (TFA) composition but similar solid fat content (SFC). Samples of the first group (named group A) had TFA between 0.0 and 56.23 %, while the samples of the second group (group B) contained trans isomers ranging from 0.0 to 44.4 %. A polarized microscope was used to monitor the differences between the samples in terms of crystal size and crystal number during isothermal crystallization. In general, increasing TFA resulted in formation of larger crystals in a shorter time. Similar findings were also observed when small deformation time and frequency sweep experiments were conducted. A higher TFA content led to higher complex modulus values during isothermal crystallization. On the other hand, when the samples were stored at 4 °C for 48 h, the samples with the lower trans isomer had higher hardness values.     

Differentiation of Mechanically and Chemically Extracted Hazelnut Oils Based on their Sterol and Wax Profiles

The sterol and wax content of solvent extracted (SEHO) and cold pressed hazelnut oils (CPHO) were compared. A total of 48 samples from 19 hazelnut varieties were collected for two successive crop years from four different geographical districts in Turkey. Hazelnuts were processed to oil with a laboratory scale press, than the remaining oil in cake was extracted with n‐hexane. CPHO and SEHO were evaluated for their wax, sterol and squalene contents. Results showed that sterol, squalene and wax contents of all individual cultivars were higher in SEHO than those of CPHO, indicating the higher solubility of these compounds in solvent. Total sterol contents ranged between 1088.56 (Kargalak)—1609.39 mg/kg (Mincane) for CPHO and 1590.86 (Çak?ldak)—2897.26 mg/kg (Mincane) for SEHO. Hazelnut oils were found to be richer of C36‐38 esters than C40‐46 group. Total wax content was between 24.19 (Kargalak)—94.58 mg/kg (Ku?) for CPHO and 81.46 (Kargalak)—160.92 mg/kg (Akçakoca) for SEHO. The squalene amounts of the samples obtained by hexane extraction were between 499.75 (Allahverdi)—885.36 mg/kg (Cavcava), while it varied between 288.55 (Kargalak)—647.68 mg/kg (Mincane) in cold pressed oils. Significant and obvious variations between SEHO and CPHO were verified by principal component and hierarchical cluster analysis. Geographical discrimination was also achieved by discriminant analysis.     

Factors affecting the electrical resistivity of soybean oil methyl ester

Factors affecting the electrical resistivity of soybean oil methyl ester (which is important in some industrial applications) were investigated by the addition of polar constituents [free fatty acids (FFA), water, phospholipids, monoglyceride, sterol, tocopherol, peroxides, and β-carotene] to aluminapurified soybean oil methyl ester (APSBOMe). Investigation of measuring conditions showed that reproducible results were obtained when the potential was greater than 25 V, and the charging time was greater than 10 s. The resistivity of APSBOMe increased logarithmically as temperature decreased linearly. FFA had little effect on resistivity. Saturation with water lowered the resistivity of APSBOMe much more than that of alumina-purified soybean oil (APSBO). Phospholipids reduced the resistivity significantly when added to dry ester, but the addition of water affected the resistivity of the samples containing phospholipids only slightly. Monoglyceride, sterol, tocopherol, and hydroperoxide affected the resistivity of dry methyl ester similarly, but only monoglyceride showed a significant synergistic effect with water. Diacylperoxide and β-carotene had little effect on the resistivity of the ester.     

Catalytic behavior of ruthenium in soybean oil hydrogenation

Soybean oil was hydrogenated with a carbon‐supported ruthenium catalyst (Ru/C) at 165 °C, 2 bar H₂ and 500 rpm stirring speed. Reaction rates, trans isomer formation, selectivity ratios and melting behaviors of the samples were monitored. No catalytic activity was found for the application of 10 ppm of the catalyst, and significant catalytic activity appeared at >50 ppm of active catalyst. The catalyst concentration had an effect on the reaction rate of hydrogenation, but the weight‐normalized reaction rate constant (k_c) was almost independent of the catalyst concentration at lower iodine values. Ru/C generated considerable amounts of trans fatty acids (TFA), including high amounts of trans 18:2, and also stearic acid, due to its very non‐selective nature. The selectivity ratios were found to be low and varied between 1.12 and 4.32 during the reactions. On the other hand, because of the low selectivity, higher slip melting points and solid fat contents at high temperatures were obtained than those for nickel and palladium catalysts. Another different characteristic of this catalyst was the formation (max 1.67%) of conjugated linoleic acid (CLA) during hydrogenation. Besides, CLA formation in the early stages of the reactions did not change very much with the lower iodine values.     

Application of experimental non-linear control based on generic algorithm to a polymerization reactor

The dynamics of free radical polymerization of styrene and on-line control of temperature in a cooling jacketed batch polymerization reactor is investigated. The benzoyl peroxide initiator is introduced into the reactor once at the beginning of the reaction to obtain the desired monomer conversion and the desired average chain length in a minimum reaction time. The optimal constant set temperature, which is generally realized in industrial applications, and the set profile are used as two different optimal operating conditions. The temperature control of the polymerization reactor is achieved experimentally and theoretically. The control of nonlinear systems has progressed considerably, and various nonlinear process model based control techniques have appeared in the literature. The problem is how to tune the controller in order to obtain comparable closed loop responses. Generic model control (GMC) is applied and the performance of the control results are compared with the previously published control results.     

The Impact of PbF2-Based Glasses on Radiation Shielding and Mechanical Concepts: An Extensive Theoretical and Monte Carlo Simulation Study

Journal of Inorganic and Organometallic Polymers and Materials - This work aimed to investigate the impact of Lead-fluoride based glasses via theoretical and simulation techniques on mechanical and...     

Ytterbium (III) oxide reinforced novel TeO2–B2O3–V2O5 glass system: Synthesis and optical,structural, physical and thermal properties

Different samples of xTeO₂.(25-y)B₂O₃.zV₂O₅.yYb₂O₃ (or TBVY) new glass material were synthesized by the classical melt-quenching method. Structural, optical, physical, and thermal analyses of the synthesized glasses were performed in addition to Monte Carlo simulation to test radiation shielding properties. The results showed that increasing ratios of Yb₂O₃ (y = 0.0, 0.5, 1.0, and 1.5 mol%) produced monotonic density values of the synthesized glasses ranging from 4.70058 g cm^?3 to 5.01038 g cm^?3. XRD and FTIR analyses were used to confirm the glass structure of all samples. Optical transmittance and absorption parameters varied almost monotonically with increasing ratios of Yb₂O₃ indicating the ability to predict and control these properties using Yb₂O₃ additive. Furthermore, simulated radiation interaction parameters, such as attenuation coefficients and half-value layer, exhibited well-behaved dependence on the concentration ratio of the Yb₂O₃ additive. This approach to glass material synthesis demonstrate the useful synergetic effect of combining structural, optical, and radiation characteristics.