Racial differences in Helicobacter pylori seroprevalence in Singapore: correlation with differences in peptic ulcer frequency

The aim of this study was to determine, first, whether racial differences exist in the seroprevalence of Helicobacter pylori infection in Singapore, and second, whether these differences correlate with racial differences in peptic ulcer frequency. A commercial serological test for immunoglobulin (Ig)G antibody to H. pylori which was 90% sensitive and 83% specific in our population was used to screen 403 adult blood donors of Chinese, Malay and Indian origin, aged between 15-60 years. Serum specimens from 84 paediatric patients admitted to the Paediatrics Department, National University of Singapore, with non-gastroenterological illnesses were also tested. In all three races, seroprevalence of H. pylori increased with age. Indians have the highest prevalence of infection followed by Chinese and Malays. Peptic ulcer prevalences are known to be highest in Chinese, followed by Indians and Malays. The Malays have the lowest prevalence of H. pylori and peptic ulcer among the three races in Singapore. Indians have a higher prevalence of H. pylori antibodies but a lower frequency of peptic ulcer than the Chinese. Racial differences in peptic ulcer frequency between Chinese and Indians are not explained by the prevalence of H. pylori infection; other environmental or genetic factors may be involved.     

Development and validation of a computer attitude measure for young students (CAMYS)

An important aspect in successfully implementing instructional technology in educational settings is user acceptance, which is greatly influenced by users’ attitudes towards computers. Today, computers have become an integral part of instruction at all levels of education and it is important for educators and policy makers to understand how various factors interact with the user’s characteristics to influence the teaching and learning process involving the use of computers. Over the years, many scales have been developed to measure computer attitudes of secondary students and adults. Few have been develop to be used for students in the primary schools. The aim of this study is to develop and validate a computer attitude measure for young students (CAMYS). The revised 12-item CAMYS was piloted with 256 students aged 10–12 with a mean of 11.9 years (SD = 0.31). Several statistical analyses were performed to assess the reliability and validity of the measure. The measure, together with suggestions for administration and scoring are included.     

Series Representations for Rice's Ie Function

Two new series representations for the Rice functionIe (k, x)are presented. One of the series involves the modified Struve functions and the other involves the modified Bessel functions. These two series complement each other in their convergence speeds as functions of the values ofkandx. The truncation error bounds are derived for both series. Therefore, they can be used alternatively with high efficiency and known precision.     

Leveraging information technology to achieve the IT2000 vision: the case study of an intelligent island

Although many developing and developed countries have major initiatives to promote the use of information technology (IT), Singapore is one of the few countries which not only has a comprehensive IT2000 vision, but which is also taking proactive steps to make the vision a reality. This paper examines how Singapore is currently leveraging IT applications to achieve the IT2000 vision. It also explores some of the uses of IT that will be deployed in the near future. Specifically, this paper discusses the use of IT applications to provide one-stop, non-stop government and business services, promote cashless transactions, provide more options for leisure, and facilitate easy commuting.     

Oxidation states in surface and buried coal from the Fording River Deposit

A suite of five representative samples from a freshly opened adit in the Fording River Coal Deposits, BC was taken at selected distances from the surface to the 45.7 m depth of the seam to provide material for studying the progress of coal oxidation under natural conditions. The ‘as-mined’ < 28 US mesh material from each sample was subjected to standard proximate, ultimate and free swelling index (FSI) analyses, followed by quantitative evaluation of surface oxidation states, using several techniques concurrently. Correlation of the results indicates a progressive decrease in oxidation from a very high level for the surface sample, with FSI 1, to a relatively low oxidation level for samples taken at 22.9 m and 45.7 m distances. Solvent extracts show a progressive decrease in the ratio of soluble aliphatic-to-aromatic compounds from surface to deep coal and in the amount of carboxylate groups. Oxidized coals require pretreatment with dilute acids in order to convert phenolate and carboxylate salts into phenols and carboxylic acids respectively; the analytical results for the latter are then increased by a factor of 4–6.     

Effects of late percutaneous transluminal coronary angioplasty of an occluded infarct-related coronary artery on left ventricular function in patients with a recent (< 6 weeks) Q-wave acute myocardial infarction (Total Occlusion Post-Myocardial Infarction Intervention Study [TOMIIS]--a pilot study)

The effect of late percutaneous transluminal coronary angioplasty (PTCA) of an occluded infarct-related artery on left ventricular ejection fraction was studied in patients with a recent, first Q-wave myocardial infarction in a prospective, randomized study. Forty-four patients (31 men and 13 women, mean age 58 +/- 12 years) with an occluded infarct-related coronary artery were randomized to PTCA (n = 25) or no PTCA (n = 19). Patients received acetylsalicylic acid, a beta blocker and an angiotensin-converting enzyme inhibitor unless contraindicated. Left ventricular ejection fraction was determined at baseline and 4 months. Coronary angiography was repeated at 4 months. Baseline ejection fraction measured 20 +/- 12 days after myocardial infarction was 45 +/- 12% in both groups. PTCA was performed 21 +/- 13 days after the event. The primary PTCA success rate was 72%. One patient in each group died before angiographic follow-up, which was completed in 37 of the remaining 42 patients (88%; 21 with and 16 without PTCA). At 4 months, the infarct-related artery was patent in 43% of PTCA patients and in 19% of no PTCA patients (p = NS). Reocclusion occurred in 40% of patients after successful PTCA. Secondary analyses showed that the change in left ventricular ejection fraction was significantly greater in patients with a patent infarct-related artery (+9.4 +/- 6.2%) than in those with an occluded artery (+1.6 +/- 8.8%; p = 0.0096). Baseline ejection fraction also independently predicted improvement in left ventricular ejection fraction (p = 0.0001).(ABSTRACT TRUNCATED AT 250 WORDS)     

Variable Digital Filter With Group Delay Flatness Specification or Phase Constraints

In this paper, we consider the design of finite-impulse response variable digital filters (VDFs) with variable cutoff frequency or variable fractional delay. We propose the design of VDFs with minimum integral squared error and constraints on the maximum error deviation in conjunction with flatness group delay specification or phase constraints. These specifications allow the VDFs to have approximately linear phase, especially in the passband. As these specifications are required to be satisfied for all the filters generated by the VDF with controllable spectral characteristics, the linear constraints resulting from the flatness specification are relaxed to inequality constraints. To make the optimization problem tractable for the phase constrained problem, suitable approximations are employed in the paper. The design problem is formulated as an optimization problem with a quadratic cost function and infinite number of constraints. A numerical scheme with adaptive grid step size is proposed for solving the optimization problem.     

Lightweight,Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

Porous polymeric foams as dielectric layer for highly sensitive capacitive based pressure sensors have been extensively explored owing to their excellent flexibility and elasticity. Despite intensive efforts, most of previously reported porous polymer foams still suffer from difficulty in further lowering the attainable density limit of ≈0.1 g cm^?3 while retaining high sensitivity and compressibility due to the limitations on existing fabrication techniques and materials. Herein, utilizing 3D interconnected networks of few‐layer hexagonal boron nitride foams (h‐BNFs) as supporting frameworks, lightweight and highly porous BN/polydimethylsiloxane composite foams (BNF@PDMS) with densities reaching as low as 15 mg cm^?3 and permittivity close to that of air are fabricated. This is the lightest PDMS‐based foam reported to date. Owing to the synergistic effects between BN and PDMS, these lightweight composite foams possess excellent mechanical resilience, extremely high compressibility (up to 95% strain), good cyclic performance, and superelasticity. Being electrically nonconductive, the potential application of BNF@PDMS as a dielectric layer for capacitive sensors is further demonstrated. Remarkably, the as‐fabricated device can perform multiple sensing functions such as noncontact touch sensor, environmental monitoring sensor, and high sensitivity pressure sensor that can detect extremely low pressures of below 1 Pa.     

The Pathway to Intelligence: Using Stimuli‐Responsive Materials as Building Blocks for Constructing Smart and Functional Systems

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man‐made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli‐responsive materials; these “smart” materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli‐responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self‐regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli‐responsive materials as the basic building blocks.