Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Electrochemical behaviors of uranium and plutonium at simultaneous recoveries into liquid cadmium cathodes

Experiments were conducted on simultaneous recovery of uranium and plutonium electrochemically into laboratory scale liquid cadmium cathodes (LCCs) at different U/Pu ratios in the salt phase, and the influence of the salt composition on the recovered amounts of uranium and plutonium, the morphologies of uranium and plutonium in the LCC, and the behavior of americium, which is present as a decay product of plutonium-241, were examined. As a result, it was shown that there is a threshold in the U/Pu ratio in the salt phase between 1/4.3 and 1/1.73 for the successful simultaneous recovery of uranium and plutonium up to 10 wt% in the LCC at high current efficiencies. In the LCC, uranium and plutonium existed in the forms of intermetallic compounds, (U, Pu)Cd₆ and (U, Pu)Cd₁₁, and also pure uranium metal. It was also revealed that americium associates with plutonium according to the separation factor during the LCC operation.     

Bending Behavior of Steel Pipe Girders Filled with Ultralight Mortar

Bending behavior of steel pipes filled with ultralight mortar was studied by bending tests using a steel pipe, steel pipes filled with ultralight mortar, and steel pipes filled with light aggregate concrete and normal concrete. The steel pipe model filled with normal concrete had 1.8 times higher bending strength than the steel pipe model. The bending behavior of the steel pipe filled model with ultralight mortar was not improved when the compressive strength of the ultralight mortar was less than 1 MPa. However, ductility was much improved when the compressive strength was over 5 MPa, and the ultimate steel strain was more than double of the steel pipe model. The strains of steel and concrete in all the models were proportional to the distance from the neutral axis until the steel plate yielded. A simple analytical method was proposed to calculate the bending moments of the ultralight mortar filled steel pipes. The calculated values agreed very well with the test results.     

Omnifocus video camera

The omnifocus video camera takes videos, in which objects at different distances are all in focus in a single video display. The omnifocus video camera consists of an array of color video cameras combined with a unique distance mapping camera called the Divcam. The color video cameras are all aimed at the same scene, but each is focused at a different distance. The Divcam provides real-time distance information for every pixel in the scene. A pixel selection utility uses the distance information to select individual pixels from the multiple video outputs focused at different distances, in order to generate the final single video display that is everywhere in focus. This paper presents principle of operation, design consideration, detailed construction, and over all performance of the omnifocus video camera. The major emphasis of the paper is the proof of concept, but the prototype has been developed enough to demonstrate the superiority of this video camera over a conventional video camera. The resolution of the prototype is high, capturing even fine details such as fingerprints in the image. Just as the movie camera was a significant advance over the still camera, the omnifocus video camera represents a significant advance over all-focus cameras for still images.     

High-temperature fracture of composite materials

The high-temperature fracture of composite materials containing strong particles is discussed on the basis of micromechanical models in which the recovery effect by diffusion of atoms is taken into account. The results of the calculations are compared with experimental results on 21Cr-4Ni-9Mn steels which consist of equiaxed grains containing rod-like M₂₃ C₆ carbide particles. The internal stresses acting in the particles and the grains are calculated on the basis of the model. The fracture mode of the material changes from transgranular to grain boundary fracture with increasing temperature, and the elongation of the material increases as a result. These experimental observations can be interpreted in terms of the calculation results of the constant stress model in which non-uniform distribution of plastic strain is assumed, but the calculated results of the constant strain model cannot explain the experimental results.     

Experimental validation with field circuit by changing start voltage of salient pole synchronous motor

This paper reports on the experimental validation characteristics of a salient pole synchronous motor with the starting field circuit in contact. The starting characteristics were experimentally evaluated at voltages of 100%, 75%, and 50% using a 1.5 kVA salient pole synchronous motor. The signal for pulling into step was applied to the field circuit by using the control module for all test conditions. The results confirmed the proper pulling into step at 100% of voltage, and the results of the tests at 50% and 75% of voltage revealed that the pulling into step under these conditions becomes stable at the suitable slip condition.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Attribute-based quality classification of academic papers

Investigating the relevant literature is very important for research activities. However, it is difficult to select the most appropriate and important academic papers from the enormous number of papers published annually. Researchers search paper databases by combining keywords, and then select papers to read using some evaluation measure—often, citation count. However, the citation count of recently published papers tends to be very small because citation count measures accumulated importance. This paper focuses on the possibility of classifying high-quality papers superficially using attributes such as publication year, publisher, and words in the abstract. To examine this idea, we construct classifiers by applying machine-learning algorithms and evaluate these classifiers using cross-validation. The results show that our approach effectively finds high-quality papers.     

Navigation behavior based on self-organized spatial representation in hierarchical recurrent neural network

ABSTRACT

A cognitive map is an internal model of the external world and contains the spatial representation of the surrounding environment. The existence of the cognitive map was first identified in rats; rats can navigate to their desired destination using cognitive maps while dealing with environmental uncertainty. We performed a mobile robot navigation experiment where obstacles were randomly placed using hierarchical recurrent neural network (HRNN) with multiple timescales. The HRNN was trained to navigate the mobile robot to the destination indicated by a snapshot image. After the training, the HRNN was able to successfully avoid the obstacles and navigate to the destination from any location in the environment. Analysis of the internal states of the HRNN showed that the module with fast timescale handles obstacle avoidance and the one with slow timescale has spatial representation corresponding to the spatial position of the destination. Moreover, in the experiment wherein the novel path appeared, the trained HRNN performed shortcut behavior. The shortcut behavior shows that the HRNN performed navigation using the self-organized spatial representation in the slow recurrent neural network. This indicates that training of goal-oriented navigation, i.e. the navigation motivated by a snapshot image of the destination results in the self-organization of cognitive map-like representation.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.