Influence of Rheological Behavior of Purely Viscous Fluids on Analytical Residence Time Distribution in Straight Tubes

In an effort to better understand the homogeneity of heat treatment of foodstuffs in holding tubes, the cumulative residence time distribution function is derived for a Herschel‐Bulkley fluid from fully developed laminar flow in a straight circular tube under isothermal conditions when diffusional effects are negligible. The proposed analytical solution can be reduced to solutions for Newtonian, shear‐thinning, dilatant, Bingham fluids by setting particular rheological parameters, and consequently, it is possible to successfully explain the dependence of residence time distribution on fluid properties for almost all of the rheological models used for time‐independent purely viscous fluids.     

Taguchi method to optimize the micron and submicron size cenosphere particulates filled E‐glass fiber‐reinforced vinylester composites

In this work, the mechanical and tribological characteristics of E‐glass fiber‐reinforced vinylester composites have been investigated experimentally under dry sliding conditions. The E‐glass fiber‐reinforced vinylester composites with uniform micron and submicron size cenosphere particulates of three different sizes (2 µm, 900 nm, and 400 nm) had been prepared in the laboratory. In this work the effect of parameters such as applied normal load, particulate size, sliding speed, sliding distance and roughness on friction and wear behavior have been carried. A plan of experiments, based on the Taguchi design, was performed to acquire data in a controlled way. An orthogonal array L₂₇ (3¹³) and Analysis of variance (ANOVA) have been applied to investigate the influence of process parameters on the coefficient of friction (COF) and sliding wear behavior of these composites. It was found that the submicron size particulates 400 nm as filler contributed significantly to improve the mechanical properties and wear resistance of the composites. The experimental results indicate that the specific wear rate is greatly influenced by applied normal load and particle size. ANOVA results showed that the applied normal load significantly influence the specific wear rate of cenosphere filled glass fiber‐reinforced vinylester composites. Regression analysis is carried to check the suitability of the prediction equation and modeling of the wear parameters and the typical R² values for COF and specific wear rate are 86.7 and 94.3%, respectively. The scanning electron microscopy are used clarify the experimental in the frictional and wear testing. POLYM. COMPOS., 35:775–787, 2014. © 2013 Society of Plastics Engineers     

Fatty Acids Released from Milk Fat by Lipoprotein Lipase and Lipolytic Psychrotrophs

ABSTRACT: The ability of 13 different strains of psychrotrophs to release free fatty acids in milk was evaluated by using GC analysis. The 13 strains could be categorized into 3 groups: Group 1 consisted of bacteria that grew well and released large quantities of free fatty acids, group 2 consisted of bacteria that grew well but released low amounts of free fatty acids, and group 3 consisted of bacteria that did not grow well nor released large quantities of fatty acids. In group 1, 3 strains were determined to be highly lipolytic, releasing short‐chain fatty acids in amounts greater than reported threshold values. Group 3 consisted of 2 strains, which did not grow well in heat‐treated milk, and the subsequent release of free fatty acids was minor during the 10‐d monitoring time. The other 8 strains tested showed no specific pattern of fatty acid release and quantities of short‐chain fatty acids were not large, despite the ability to grow to high numbers in the treated milk. This work indicates that the lipolytic activity of psychrotrophs common in raw milk is specific to the species and a general prediction of free fatty acid release may not be possible.     

Large-scale compressed hydrogen storage as part of renewable electricity storage systems

Storing energy in the form of hydrogen is a promising green alternative. Thus, there is a high interest to analyze the status quo of the different storage options. This paper focuses on the large-scale compressed hydrogen storage options with respect to three categories: storage vessels, geological storage, and other underground storage alternatives. In this study, we investigated a wide variety of compressed hydrogen storage technologies, discussing in fair detail their theory of operation, potential, and challenges. The analysis confirms that a techno-economic chain analysis is required to evaluate the viability of one storage option over another for a case by case. Some of the discussed technologies are immature; however, this does not rule out these technologies; rather, it portrays the research opportunities in the field and the foreseen potential of these technologies. Furthermore, we see that hydrogen would have a significant role in balancing intermittent renewable electricity production.     

Low-Mass WIMP Sensitivity and Statistical Discrimination of Electron and Nuclear Recoils by Varying Luke-Neganov Phonon Gain in Semiconductor Detectors

Amplifying the phonon signal in a semiconductor dark matter detector can be accomplished by operating at high voltage bias and converting the electrostatic potential energy into Luke-Neganov phonons. This amplification method has been validated at up to |E|=40 V/cm without producing leakage in CDMS?II Ge detectors, allowing sensitivity to a benchmark WIMP with mass M _χ =8 GeV/c² and σ=1.8×10^?42 cm² (with significant sensitivity for M _χ >2 GeV/c²) assuming flat electronic recoil backgrounds near threshold. Furthermore, for the first time we show that differences in Luke-Neganov gain for nuclear and electronic recoils can be used to discriminate statistically between low-energy background and a hypothetical WIMP signal by operating at two distinct voltage biases. Specifically, 99% of events have p-value <10^?8 for a simulated 20?kg-day experiment with a benchmark WIMP signal with M _χ =8 GeV/c² and σ=3.3×10^?41 cm².     

Effect of Zr on dielectric, ferroelectric and impedance properties of BaTiO3 ceramic

A polycrystalline sample of Zr-doped barium titanate (BaTiO₃) was prepared by conventional solid state reaction method. The effect of Zr (0·15) on the structural and microstructural properties of BaTiO₃ was investigated by XRD and SEM. The electrical properties (dielectric, ferroelectric and impedance spectroscopy) were measured in wide range of frequency and temperature. With substitutions of Zr, the structure of BaTiO₃ changes from tetragonal to rhombohedral. Lattice parameters were found to increase with substitution. The room temperature dielectric constant increases from ～ 1675 to ～ 10586 and peak dielectric constant value increases from ～ 13626 to ～ 21023 with diffuse phase transition. Impedance spectroscopy reveals the formation of grain and grain boundary in the material and found to decrease with increase in temperature.     

Measurement of Plasma Density in Brass Arc Plasma at Atmospheric Pressure Using a Langmuir Single Probe

In this work, we construct electrodes of brass to produce plasma by arc discharge and is characterized by using a movableLangmuir single probe. It is a simple w...     

Inactivation of lipoxygenase in whole soy flour suspension by ultrasonic cavitation

Use of ultrasound for lipoxygenase inactivation in whole soy flour suspension was studied. Inactivation of the enzyme was influenced by the time of exposure, pH, and the amplitude of ultrasound. Exposure to cavitating 20 kHz ultrasound for 3 h at pH > 5.0 had no effect on the activity of the enzyme. However, under similar conditions, the activity decreasd by 70-85% when pH was lowered to 5.0 and 4.0, respectively. Lipoxygenase activity also decreased with increase in frequency of the ultrasound waves when pH was ≥5.0; above pH 5.0, increase in frequency did not affect the enzyme activity after an exposure of 1 h.