On the performance of heterogeneous MANETs

Recent decades have witnessed the birth of major applications of wireless communication technology, further supported by the increasing capabilities of portable devices, low cost and ubiquitous presence. Despite radio technology diversity, a great deal of existing research focuses on a single and isolated wireless technology at a time, where homogeneous elements are identified by IP addresses. This work presents a heterogeneous technology routing (HTR) Framework, targeted towards scenarios where the heterogeneity of devices and networking technologies is present. Our contribution is many fold. It consists of a framework, which encompasses a process for bootstrapping networks, a routing protocol capable of dealing with multiple network interfaces, and a tuning with multipath extensions. We evaluate the performance of the bootstrap, routing and multipath mechanisms by way of simulation and an actual testbed implementation. The multipath evaluation simulates HTR networks with WiMAX, 3GPP LTE and Wi-Fi support. Results show that our proposal can effectively improve the data delivery ratio for ad-hoc networks and that it reduces the end-to-end delay without major impact on network energy consumption. As part of HTR tuning, we investigate next the impacts of tuning the HELLO refresh interval timer on route convergence and its subsequent energy consumption reduction during this phase. We also compare our tuned HTR with the widely used optimized link state routing protocol. Results show that varying the HELLO refresh interval can improve the convergence time and reduce the energy consumption without major impact on network behavior. Our proposal also includes a new distributed address allocation algorithm, namely, the dynamic node configuration protocol (DNCP). This paper conducts a comparative analysis between the Prime, Prophet and the DNCP schemes using static and dynamic topologies in terms of network setup time, energy consumption and control message overhead. Results show that the DNCP had a lower battery power consumption and less control message overhead while it slightly suffers with regard to setup.

     

Fully digital BPSK demodulator for satellite supressed carrier telecommand system

In this paper, we present the design of a fully digital binary phase shift keying demodulator for application in satellite high‐rate suppressed carrier telecommand system. The proposed system digitalizes the received signal in the intermediate frequency stage using bandpass sampling technique, and the resulting baseband signal is used to synchronization of symbol and phase and to bit detection. The design of all functional modules is presented in details. Another innovation presented in this work is the inclusion of a non‐linearity in the phase synchronizer module to permit its operation independent from the signal amplitude. Moreover, aiming the characterization and performance evaluation of the system, we do some original mathematical analyses. Finally, test results show that the demodulator complies all the project requirements, and the prototype implementation loss, in terms of bit energy to noise power density ratio, is less than 0.3 dB. Copyright © 2016 John Wiley & Sons, Ltd.     

Financial Times Series Forecasting of Clustered Stocks

Mobile Networks and Applications - Predicting the stock market is a widely studied field, either due to the curiosity in finding an explanation for the behavior of financial assets or for financial...     

Developing Smart Grids Based on GPRS and ZigBee Technologies Using Queueing Modeling–Based Optimization Algorithm

Smart metering systems have become widespread around the world. RF mesh communication systems have contributed to the creation of smarter and more reliable power systems. This paper presents an algorithm for positioning GPRS concentrators to attain delay constraints for a ZigBee‐based mesh network. The proposed algorithm determines the number and placement of concentrators using integer linear programming and a queueing model for the given mesh network. The solutions given by the proposed algorithm are validated by verifying the communication network performance through simulations.     

D.C. scanning thermal microscopy: Characterisation and interpretation of the measurement

The used Scanning Thermal Microscopy (SThM) probe is a thin Pt resistance wire acting as a heat source and as a detector simultaneously. Its energetic balance is investigated by the study of the temperature profile along the probe. A theoretical approach of the measurement, based on this investigation, is then proposed. Simulations with this modelling are shown to predict how the heat, electrically produced in the probe, is dissipated in the probe-sample system. In particular, it is shown that the steady-state of conduction losses to the thermal element support varies versus the thermal conductivity of the sample and can lead to bad interpretations of the measurement.     

Compression of Q-switched and mode-locked CW Nd:YAG laser pulses

Using the optical compression technique with a single-mode optical fiber and a grating pair, the 85 ps pulses from aQ-switched, mode-locked CW Nd:YAG laser have been compressed by a factor of 30. On average, an overall enhancement of 7 × in the peak power was achieved.     

Ferroelectric properties of pulsed laser deposited PZT (92/8) thin films

The effect of pulse amplitude on the ferroelectric and switching properties of pulsed laser deposited PZT (92/8) thin films has been studied. The structural analysis revealed that the films had a well crystallized perovskite phase without secondary phases. The atomic force microscopy has been employed to estimate the grain size and surface roughness of the film. A well-saturated P–E hysteresis loop was observed with average values of remnant polarization (P_r) ≈ 16.0 μC/cm², saturation polarization (P_s) ≈ 21.7 μC/cm² and coercive field ≈138 kV/cm. The P–E loops were very stable with frequency, confirming that the contribution of the leakage current and/or mobile free charges to the polarization is minimum. The polarization current exhibits the exponential dependence on the pulse amplitude and the leakage current seems to be governed by the hopping mechanism which is generally associated to structural defects.     

Evaluation of the addition of wheat residues in the production of Pinus oocarpa agglomerated panels

Clean Technologies and Environmental Policy - The aim of this research was to evaluate the physical and mechanical properties of Pinus oocarpa wood agglomerated panels produced with the addition of...     

Building a bridge between performance management,radical innovation,and innovation networks: A systematic literature review

Research on performance management (PM) of networks and radical innovation has largely developed along two isolated paths. On the one hand, a growing body of knowledge addresses the use of performance management systems in the context of networks (notably for production and incremental innovation). On the other hand, radical innovation scholars have shown how innovation initiatives that are more uncertain demand the use of new approaches (e.g., new project management routines or different evaluative tools for portfolios). Some scholars even suggest that traditional PM may suppress radical innovation. Our study takes a different approach. It aims to bridge radical innovation and network performance management through a systematic review of the literature. Here, we adopt a hybrid approach that combines bibliometrics with content analysis. Whereas the literature often separates the issues of network performance management and radical innovation, our contribution expands the theory of network management and radical innovation by developing a conceptual framework based on these concepts, thus combining them. We also offer suggestions for further research on this approach. Our framework suggests that overall, the performance management of radical innovation networks presents different features (e.g., recursive rather than linear) and constructs (e.g., openness and unintended performance) from those of innovation network management.