Carbon/PbO2 asymmetric electrochemical capacitor based on methanesulfonic acid electrolyte

A new hybrid electrochemical capacitor based on an activated carbon negative electrode, lead dioxide thin film and nanowire array positive electrode with an electrolyte made of a lead salt dissolved in methanesulfonic acid was investigated. It is shown that the maximum energy density and specific capacity of the C/PbO₂ nanowire system increase during the first 50 cycles before reaching their maximum values, which are 29 Wh kg⁻¹ and 34 F g⁻¹, respectively, at a current density of 10 mA cm⁻² and a depth of discharge (positive active electrode material) of 3.8%, that corresponds to a 22C rate. This is 7–8 times higher than the corresponding maximum values reached with a C/PbO₂ thin film cell operated in the same conditions. After an initial activation period, the performances of the C/PbO₂ nanowire system stay constant and do not show any sign of degradation during more than 5000 cycles. For comparison, the C/PbO₂ thin film system exhibits a 50% decrease of its performances in similar conditions.     

Effect of processing procedures and conditions on structural,morphological, and rheological properties of polyethylene/polyamide/nanoclay blends

The article deals with the effect of processing procedures and conditions on structural, morphological, and rheological properties of ternary blends composed of polyethylene (PE), polyamide (PA)‐12, and organically modified montmorillonite nanoclay with selective affinity. Samples were prepared from PE/PA and PA/PE blends, either by simultaneous mixing or from a polymer/clay masterbatch, using two processing conditions. The results have shown the existence of a weight fraction threshold, above which no significant processing effect was observed. Below this weight fraction threshold, the results tend to underline the significant role of two parameters that depend on processing procedures and/or conditions: the contact time between PE and PA phases and the contact time between clay and PA. Clay structure, blend morphology, and rheological properties were all shown to depend on these two parameters, and also on the nature of the matrix (PE or PA), because of the selective affinity of clay toward polymer phases. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Dichloroacetate Radiosensitizes Hypoxic Breast Cancer Cells

Mitochondrial metabolism is an attractive target for cancer therapy. Reprogramming metabolic pathways can potentially sensitize tumors with limited treatment options, such as triple-negative breast cancer (TNBC), to chemo- and/or radiotherapy. Dichloroacetate (DCA) is a specific inhibitor of the pyruvate dehydrogenase kinase (PDK), which leads to enhanced reactive oxygen species (ROS) production. ROS are the primary effector molecules of radiation and an increase hereof will enhance the radioresponse. In this study, we evaluated the effects of DCA and radiotherapy on two TNBC cell lines, namely EMT6 and 4T1, under aerobic and hypoxic conditions. As expected, DCA treatment decreased phosphorylated pyruvate dehydrogenase (PDH) and lowered both extracellular acidification rate (ECAR) and lactate production. Remarkably, DCA treatment led to a significant increase in ROS production (up to 15-fold) in hypoxic cancer cells but not in aerobic cells. Consistently, DCA radiosensitized hypoxic tumor cells and 3D spheroids while leaving the intrinsic radiosensitivity of the tumor cells unchanged. Our results suggest that although described as an oxidative phosphorylation (OXPHOS)-promoting drug, DCA can also increase hypoxic radioresponses. This study therefore paves the way for the targeting of mitochondrial metabolism of hypoxic cancer cells, in particular to combat radioresistance.     

Synthesis and Microstructural Characterization of Substoichiometric Ti2Al(CxNy) Solid Solutions and Related Ti2AlCx and Ti2AlN End‐Members

Ti, TiC, Al and AlN powders were mixed to synthesize Ti₂Al(C_xN_y) (x + y < 1) solid solutions, Ti₂AlC_x (x < 1) and Ti₂AlN‐related end‐members by hot isostatic pressing at 1400°C/80 MPa for 4 h. For the pure carbides, it is demonstrated that single‐phased samples can only be obtained when about 15% of substoichiometry on the carbon site is applied. Such a result likely implies that Ti₂AlC_x can only exist in a narrow range of carbon composition. Ti₂AlN nitride can be synthesized with y = 1. Assuming that vacancy content varies linearly from 0 to 0.15 going from Ti₂AlN to Ti₂AlC_0.85 in the solid solutions, element concentrations have been calculated to synthesize different solid solutions. Thus, it is demonstrated that single‐phased and fully dense Ti₂Al(C_0.23N_0.71), Ti₂Al(C_0.45N_0.45), and Ti₂Al(C_0.66N_0.22) carbonitrides can be synthesized.     

Mechanical Properties of Dry-Pressed Ceramic Green Products: The Effect of the Binder

The strength of alumina green samples prepared by uniaxial pressing of powders spray-dried with two binders such as poly(ethylene glycol) or poly(vinyl alcohol) is discussed in terms of (i) the adhesive properties of the polymer-rich external layer of spray-dried granules and (ii) the mechanical properties of this layer. A transition from intra- to intergranular fracture is observed when the glass transition temperature of the binder increases. The influence of the binder on the defect size distribution in the green products is investigated using the classical Weibull statistics.     

Structural and rheological investigation of interphase in polyethylene/polyamide/nanoclay ternary blends

This study aims at investigating and characterizing the interphase in Polyethylene (PE)/Polyamide (PA) blends with nodular morphology, filled with organically modified Montmorillonite (C30B), using structural and rheological experimental techniques. PE/PA/C30B blends have been prepared by simultaneous mixing at a dispersed phase fraction (PE or PA) of 20% and a clay fraction ranging from 1 to 6%. Structural properties of the interphase have been investigated using XRD combined with TEM micrographs. The presence of numerous interphase defects is evidenced, and the effect of interphase disorder is discussed. Linear viscoelastic properties show the contribution of the interphase in PE matrix ternary blends at all clay fractions, whereas interphase effects are masked by the contribution of dispersed nanoclay particles in PA matrix ternary blends.     

Random and block copolymers based on 4-methyl-1-pentene and 1-pentene

The zirconium acetamidinate catalyst {Cp*Zr(Me)₂[N(Et)C(Me)N(tBu)]} (Cp* = ?⁵-C₅Me₅) was used to synthesize both random and block copolymers based on 4-methyl-1-pentene (4M1P) and 1-pentene. The polymers have been characterized by NMR spectroscopy, SEC, DSC, high temperature HPLC and CRYSTAF. Unexpectedly, the yields and molecular weights decreased with increasing amounts of 1-pentene. The reason for this behavior is that 1-pentene occasionally undergoes 2,1-misinsertions trapping the catalyst in a dormant state. These 2,1-misinsertions do not seem to occur with the bulky 4M1P (branched α-olefin). Adding a small amount of ethylene reactivates the catalyst. Unlike most semi-crystalline polymers, the density of the crystalline phase of isotactic P4M1P can be lower than of the amorphous phase, when crystallized under very high pressures. To characterize this peculiar behavior of 4M1P-based polymers, various samples have been subjected to Pressure-Volume-Temperature (PVT) measurements. While the P4M1P homopolymers and block copolymers show the expected decrease in specific volume upon crystallization, the 4M1P-rich random copolymers proved not to vary in specific volume under the same conditions.     

Enantioselective Organocatalytic Michael Addition of Cyclobutanones to Nitroalkenes

Synthetic applications of cyclobutanones other than ring expansion and fragmentation reactions are rare. Herein, highly efficient diastereo‐ and enantioselective organocatalytic Michael additions of 2‐substituted cyclobutanone derivatives to nitroalkenes are reported allowing the stereocontrolled creation of ‘all‐carbon’ quaternary centers. The approach relies on both the use of Brønsted base/hydrogen‐bond donor bifunctional organocatalysts, and importantly, the specific stabilization and activation of cyclobutanone with a secondary amide moiety. The reaction was found to nicely accommodate a broad scope of substrates, allowing the control of up to three contiguous stereogenic centers. This work has opened new synthetic opportunities.     

Polystyrene latex particles bearing primary amine groups via soap‐free emulsion polymerization

Polystyrene latexes were prepared in the presence of an amino‐containing functional comonomer, N‐(3‐aminopropyl)methacrylamide hydrochloride (APMH), via soap‐free batch emulsion polymerization initiated by the cationic initiator 2,2′‐azobis(2‐amidinopropane) dihydrochloride. These latexes were characterized by studying the influence of the ionic comonomers on the polymerization kinetics, particle size, surface charge density and colloidal properties. The synthesized latexes were monodisperse with a final size between 100 and 600 nm depending on the APMH concentration. The initial polymerization rate and the particle number increased in accordance with the Smith–Ewart theory for soap‐free styrene emulsion polymerization with a hydrophilic functional comonomer. The final functionalization rate of the particles has been particularly studied with the intention of fitting the prepared latexes to be used in the immobilization of biological molecules for biological sample preparation and diagnostic applications. © 2020 Society of Chemical Industry     

Analysis of the Single-Crystalline Silicon Photovoltaic (PV) Module Performances Under Low γ - Radiation from Radioactive Source

The present paper is about an experimental evaluation of the terrestrial silicon single-crystalline solar PV module behavior under low gamma radiation. The