Mathematical and Scientific Foundations for an Integrative Engineering Curriculum

All fields of engineering, whether chemical, civil, electrical, materials, mechanical, etc., encompass a common body of essential mathematics and science. In the freshman year of Drexels E⁴ program, this common mathematical and scientific foundation is cultivated in the Mathematical and Scientific Foundations of Engineering I, II and III (MSFE I, MSFE II, MSFE III). In an integrated fashion, MSFE I presents the essential calculus, physics and engineering mechanics vital to the freshman engineering student. In the first two quarters, MSFE II presents chemistry with clearly defined engineering applications and significance: in the third quarter, MSFE II presents living systems with the same thrust. Also in the third quarter, MSFE III presents basic circuits and circuit elements, and a brief introduction to electromagnetic theory.     

Kaolinite-mullite reaction series: a TEM study

The kaolinite-mullite reaction series in single crystal kaolinite has been characterized by transmission electron microscopy. The exotherm observed at 980° C is attributed to the formation of a spinel phase. Mullite crystallites have also been observed with the spinel phase and both phases have a composition near that of 32 mullite. Subsequent heat treatment leads to the growth of mullite crystallites on the original kaolinite plates with the c-axis perpendicular to the plate.     

Quantitative real-time imaging of myocardium based on ultrasonic integrated backscatter

The integrated backscatter calculation over the full, two-dimensional echocardiographic sector is implemented to produce images from closed-chest dogs. This new real-time integrated backscatter measurement system allows a continuous determination of integrated backscatter from all myocardial regions in the ultrasonic view. By replacing the conventional video processor in a commercial two-dimensional echocardiographic imager with this new real-time backscatter measurement system, it is possible to produce real-time two-dimensional images based on integrated backscatter.     

Diffusion soldering for stable high-temperature thin-film bonds

Diffusion soldering is a special bonding technique to produce joints at a moderate temperature that are subsequently stable at higher temperatures. The search for material systems extending the upper-temperature limit of stability requires information from the pertinent phase diagrams and the reaction kinetics. Combining experimental studies on phase equilibration in powder samples with bulk and thin-film diffusion couples is a useful approach for a systematic search. Promising candidates for dsoldering are Pt-In or Pd-In, and molybdenum is also an effective diffusion barrier against the attack of liquid tin.     

Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

Mechanical properties of certain oriented crystalline polymers

The yield stress is a simple function of the deformation ratio in the direction of testing for specimens oriented by uniaxial or biaxial stretching or rolling. Unless the yield stress increases more rapidly than in proportion to the deformation ratio, there will be instability during tensile creep under high loads. The relative merit of various polymers differs for creep and stress relaxation. Fatigue and bend recovery are also related to the molecular structure.     

Incorporation of surface-modified UHMWPE powders and fibers in tough polyurethane composites

Ultrahigh molecular weight polyethylene (UHMWPE) powder (60 micron diameter) and chopped fiber (6.5 mm length) were surface treated with a blend of reactive gases (fluorine and oxygen.) These powders and fibers were then compounded into a thermoset polyurethane matrix. Surface-treated and control reinforcements are compared at a 10 vol.% loading level. Tensile testing indicates improved stress transfer with surface treatment. Stress transfer is also improved with fibers versus powders. Fracture toughness is characterized by measuring the essential work of fracture, w_e. Surface-treated fiber composites exhibit work of fracture values almost three times the unfilled polyurethane values. Abrasion resistance was also measured. Surface treatment was found to significantly lower wear rates of powder composites. Fiber composites had lower wear rates than powder composites, although surface treatment had little effect. An approximate inverse relationship was found between wear rate and essential work of fracture.     

Evaluation of chromic oxide,glycerol triether,and β-sitosterol as fecal flow markers in two species of nonhuman primates

Recovery of β-sitosterol, glycerol triether (1-hexadecyl-2,3,-didodecyl glycerol triether), and chromic oxide was studied in African green monkeys and stumptail macaques consuming diets containing 0.75 mg/Cal cholesterol and 38% of calories as safflower oil or butter. Following oral administration of these compounds, feces were collected daily for 9 days. For all animals, excretion of β-sitosterol and glycerol triether paralleled one another almost exactly. Except for two animlas, this was also true for chromic acid. Essentially 100% of the administered β-sitosterol and 90–95% of the glycerol triether were recovered; excretion of these markers virtually was complete by day 3. Ninety-two percent of the β-sitosterol was isolated in the nonsaponifiable lipid extract of the feces with less than 6% in the remaining aqueous phase. A maximum of 3.1% of the β-sitosterol and 1.8% of the glycerol triether were found in the blood. For stumptail macaques, the major excretory form of β-sitosterol was the 5β-derivative. African green monkeys were more variable; one animal excreted the bulk of the β-sitosterol unchanged while others excreted greater than 80% as the ring-saturated 5β-derivative. Animals consuming the safflower oil containing diet consistently excreted a greater percentage of the β-sitosterol unchanged, compared with those animals eating the butter containing diet. There was no evidence for steroid ring degradation in any of the animals used in this study.