Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks

UWB technology provides an excellent means for wireless positioning due to its high resolution capability in the time domain. Its ability to resolve multipath components makes it possible to obtain accurate location estimates without the need for complex estimation algorithms. In this article, theoretical limits for TOA estimation and TOA-based location estimation for UWB systems have been considered. Due to the complexity of the optimal schemes, suboptimal but practical alternatives have been emphasized. Performance limits for hybrid TOA/SS and TDOA/SS schemes have also been considered. Although the fundamental mechanisms for localization, including AOA-, TOA-, TDOA-, and SS-based methods, apply to all radio air interface, some positioning techniques are favored by UWB-based systems using ultrawide bandwidths.     

黄金矿山综合经济效益的灰色评估

本文偿试性地应用灰色系统理论中的灰色聚类评估模型,对山东省七个黄金矿山的综合经济效益进行了评价,得出了山东省黄金矿山的综合经济效益较好的合理结论。     

Traffic grooming on WDM rings using optical burst transport

A sublambda traffic-grooming scheme on wavelength-division-multiplexed (WDM) rings, which is called optical burst transport (OBT), is proposed. The network protocol and architecture allow increased flexibility to tailor the transport network behavior for efficient delivery of bursty data traffic. Using different network parameters, its performance is analyzed via simulation, and the implementation issues including the media-access-control (MAC) protocol, tunable-filter controller, and burst-mode receiver are addressed. Finally, the feasibility of the OBT with an experimental testbed built by the authors is demonstrated and a streaming-video application is used to present its overall functionality.     

钢板侵彻过载的三维数值模拟

利用LS—DYNA有限元程序，用弹塑性模型建立材料模型，对高速弹丸侵彻均质钢板问题进行了数值模拟，并与测试结果进行了比较，说明了有限元分析的有效性，为引信设计提供参考。     

D1100-11型造气鼓风机技术改造

针对国内采用煤制气工艺的部分中氮肥生产厂发生的造气鼓风机出力不足的现象，根据不同的系统工作状况对原风机的叶轮进行重新设计施工，不改变机组其余部分，以起到增压扩容的效果，从而实现增产降耗的目的。     

短纤维增强透气性莫来石/铁(A3S2/Fe)复合材料烧结特性的研究

本文研究了A₃S₂/Fe复合材料的烧结特性、透气性和纤维增强效果,分析了烧结过程中材料宏观结构和微观组织的形成机理.实验结果表明:纤维增强A₃S₂/Fe复合材料在900～1000℃具有良好的烧结性能,烧成后表层存在一定厚度的硬化层;纤维增强效果显着.材料抗压强度达17～23MPa,相对透气系数为4.30～9.69cm3/(cm2·s·atm).已能满足实际应用的需要.     

应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。     

Tearing, folding and deformation of a carbon-carbon sp-bonded network

A monolayer and a few layers of carbon sp²-bonded networks were torn and folded by the tip of an atomic force microscope at the steps on newly cleaved highly oriented pyrolytic graphite. It was found that the preferential breaking directions and folding axes are along the symmetry directions of the graphite hexagonal structure. Depending on the force exerted by the tip, breaking may occur along other directions. The torn part of the graphene sheet can even be stretched and deformed, and does not resume its original shape after release from the tip.