利用高温二维液相色谱对功能化聚烯烃进行表征

二维液相色谱（2D-LC）提供了合成聚合物和生物聚合物分子异质性的不同方面的信息。聚烯烃材料的2D-LC分析需要高温,但聚烯烃的高温二维液相色谱（HT-2D-LC）分析条件却未见报道。通过高温相互作用液相色谱系统（根据分析物分子化学成分的差异进行分离）和体积排阻色谱（SEC）（根据分析物分子摩尔质量的不同进行分离）的联用,乙烯-乙酸乙烯酯共聚物的完整HT-2D-LC分离第一次得以实现。     

Geography- and infrastructure-aware topology design methodology for broadband access networks (FTTx)

We present a topology design methodology for broadband (FTTx) access networks. The calculations are based on real geographic data (digital maps) and infrastructural information of the targeted area, using detailed and realistic cost models in order to provide results of practical interest. The developed heuristics offer low time consumption and nearly optimal solutions for the highly complex problem of minimal cost network deployment, due to the properly chosen and customized heuristic algorithms for the various network technologies. We review the specific properties of the FTTx network technologies, present a formal representation of the problem including a detailed cost function and network model and discuss complexity issues. The various solution techniques are presented along with case studies of real-life scenarios in order to show the potential of the methodology. The developed heuristic algorithms offer an approximation of the optimum within 10–15%, while time consumption remains in the range of a few minutes, even for large-scale scenarios with 10,000s of customers. Beyond topology design, the results provided by these methods are useful for a preliminary CAPEX estimation and techno-economic comparison.     

High performance liquid chromatographic detection of a strongly retained pigment fraction in Capsicum annuum

A new colour pigment fraction was detected in Capsicum annuum by high performance liquid chromatography. Surprisingly the pigment was strongly bound both to silica and octadecylsilica surfaces indicating that its molecular mass is probably high. Peak purity tests proved that the fraction is not homogeneous and the degree of inhomogeneity depends on the wavelength used for the peak purity test. The spectra taken at one minute intervals of the peak were strikingly different supporting the above conclusions. It is possible that this highly lipophilic pigment is a secondary product of the ripening and processing procedures and is a mixture of individual pigments covalently bound to each other.     

Research Needs and Challenges in Application of Computer and Information Sciences for Industrial Engineering

By invitation from the Editor of IIE Transactions, a research forum was established in 1987 to develop and prepare this article. The objective: to write on the directions, needs and challenges for research by the IE com-munity in applying computer and information sciences. The motivation: realizing the major advancements in computer and information sciences in the recent decade and their significant impact on the IE profession, it is vital to examine how IE research activities can respond effectively to current and emerging needs. This article is viewed as a useful contribution to such an examination.

Forum members were invited from academia, government and industry based on their experience in and commitment to research in this area. The forum was chaired by Shimon Y. Nof and the members are the co-authors of this article.

Forum members communicated and deliberated throughout 1987 and met for a review and planning session dur-ing the IIE Conference in Washington, D.C. in May, 1987 (Forum, 1987). The following article summarizes the contributions and recommendations of the forum members, and was reviewed by four guest reviewers. The re-viewers, invited by the Editor, have provided comments that have been incorporated into this article     

Engineering model of a passive planar air breathing fuel cell cathode

The behavior of an air breathing fuel cell (ABFC) operated on dry-hydrogen in dead-ended mode is studied using theoretical analysis. A one-dimensional, non-isothermal, combined heat and mass transport model is developed that captures the coupling between water generation, oxygen consumption, self-heating and natural convection at the air breathing cathode. The model is validated against planar ABFC experimental measurements over a range of ambient temperatures. The model confirms the strong effect of self-heating on the water balance within passive ABFCs. Model analysis provides several conclusions: (1) thermal runaway caused by inadequate heat rejection predominantly limits ABFC performance. (2) The natural convection boundary layer represents a significant barrier to cathode mass and heat transfer. (3) Because the mass and heat transport numbers associated with natural convection are small, even slight forced convection dramatically affects cell behavior. (4) Performance optimization requires maximizing heat rejection while minimizing flooding. Decoupling the latter two phenomena is challenging due to the exponential relationship between water vapor saturation and temperature.     

Beurteilung von hals-verbindungen

QUALIFICATION OF HALS COMPOUNDS A complex method of examination has been developed suitable for the qualification of light stabilizers; by this method, according to experience, the efficacy of HALS compounds can be extensively and expediently characterized. Several light stabilizers of the HALS-type were examined and qualified, used alone or together with a UV-absorber. It has been found that, when selecting the appropriate structure for a given polymer, the weatherability of polyolefine foils is effectively increase to six-eightfold; the increase is even tenfold when the stabilizer is combined with a benzophenone-type compound. As a utilization of these experiences, a contract with the industry, led to the production of an LDPE based agricultural foil with a life-time of several years.     

The reinitiation mechanism of HCl catalysis in PVC degradation

Summary The effect of HCl on the thermal degradation of PVC has been studied. Changes in UV and visible spectra and kinetics of HCl loss indicate that HCl is able to reinitiate the allyl-activated zip elimination by proton exchange with polyenes. Also polyene-consuming secondary reactions are accelerated by HCl.     

Thermooxidative degradation of PVC in solution in the presence of metal stearate stabilizers

Detailed research has been carried out to determine the effect of metal stearates (PbSt₂, CdSt₂, BaSt₂, CaSt₂, and ZnSt₂) on the thermooxidative degradation of PVC in inert dilute solution. The induction periods of free HCl evolution increase in the presence of PbSt₂, CdSt₂, CdSt₂, BaSt₂, and CaSt₂, while ZnSt₂, due to ZnCl₂ formation, leads to fast HCl loss without induction period. The induction periods are much shorter than those obtained during thermal degradation, but the relative order of effectiveness of these stabilizers is the same as in inert atmosphere: PbSt₂ > CdSt₂ > BaSt₂ > CaSt₂ > ZnSt₂. After the induction period, the initial rates of free HCl evolution decrease as metal stearate concentrations increase. Surprisingly, this dependence is independent of the kind of metal. At higher stabilizer concentrations, the initial rates of free HCl loss during the thermooxidative degradation approach the initial dehydrochlorination rate of thermally degraded PVC. As UV and visible spectra indicate, there is a sharp change in the normalized integral absorption versus time plots at the end of the induction periods in the presence of PbSt₂, CdSt₂, and BaSt₂. Based on these experimental results, it has been concluded that effective metal stearates have manifold roles in the course of PVC stabilization under thermooxidative conditions. The main role of these compounds is not the replacement of labile structures and HCl-scavenging, but the blocking of the rapid zip-elimination is the most important event of the stabilization process. However, this blocking is reversible, which becomes effective mainly right after the consumption of the metal soaps (reversible blocking mechanism). Another important effect of these stabilizers is that they destroy peroxides and/or peroxy radicals (antioxidant effect).