低QI含量煤沥青氢化产物的结构性质研究

以低QI净化沥青为原料，采用四氢萘高压加氢制取了氢化沥青，采用IR，NMR和TGA分析对氢化沥青及其原料净化沥青进行了对比研究，结果发现氢化沥青含有大量脂环结构，其独特的热解缩聚行为有利于可溶性中间相沥青的制备。     

硅烷交联型复合半导电塑料

对于硅烷交联型复合半导电塑料的研究表明，合理的选择EVA，炭黑，交联剂，引发剂，催化剂的种类和适宜的用量，仅仅是提高接枝和凝胶质量分散的必要条件，体系环境的酸碱度才是可以交联的充分条件，只有在体系的环境呈现出中性或弱的碱性时，硅烷才可能与PE和EVA充分接枝和交联。     

An evaluation of the performance of an automated procedure for comparative modelling of protein tertiary structure

A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The ‘collar’ extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â.     

Dispersion deposition of metal — Particle composites and the evaluation of dispersion deposited nickel — Lanthanum nickelate electrocatalyst for hydrogen evolution

A method for the preparation of high surface area coatings and its application towards fabrication of prospective composite electrocatalysts for hydrogen evolution is proposed. Exploratory studies with such a composite, (Ni/LaNiO₃), as a hydrogen electrode in alkaline solutions indicate that it is a more active electrocatalyst than sintered or electrodeposited nickel. The electrocatalytic properties were found to be a strong function of the deposition parameters as well as of the history of the oxide powder.     

Adaptive Neural Network Finite-Time Control for Uncertain Robotic Manipulators

An adaptive neural network finite-time controller (NNFTC) for a class of uncertain nonlinear systems is proposed by using the backstepping method, which employs an adaptive neural network (NN) system to approximate the structure uncertainties and uses a variable structure term to compensate the approximation errors, thus improving the robustness of the system to external disturbances. The controller is then applied to uncertain robotic manipulators, with a control objective of driving the system state to the original equilibrium point. It is proved that the closed-loop system is finite-time stable. Moreover, simulated and experimental results indicate that the proposed NNFTC is effective and robust.     

Polyaniline‐supported acid catalyst: Esterification of cinnamic acid with alcohols

Polyaniline‐supported acid salts such as polyaniline‐hydrochloride, polyaniline‐sulfate, and polyaniline‐nitrate were prepared by oxidation of aniline using benzoyl peroxide and ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalysts in the esterification of cinnamic acid with alcohols. Polyaniline‐sulfate salt was found to be the best catalyst for the esterification of cinnamic acid. The reusability, handling, and recovery of the catalyst were found to be good. The yield of the ester depended on the type of the polyaniline salt, amount of the catalyst, amount of alcohol, and both the time and the temperature of the reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1584–1590, 2005     

Melt rheology and morphology of PP/SEBS/PC ternary blend

Melt rheological properties of the ternary blend of isotactic polypropylene (PP), styreneethylene–butylene–styrene terpolymer (SEBS), and polycarbonate (PC), PP/SEBS/PC, are studied in a wide range of composition, such that PP is the matrix and SEBS and PC are the minor components, with the proportion of one varying from 0 to 30% at various fixed compositions of the other. The respective binary blends, PP/SEBS and PP/PC, studied as the reference systems for interpretation of results on the ternary blends yielded interesting new information about the morphology development and its correlation with melt rheological properties of these binary blends. The studies include the measurement of melt rheological properties on a capillary rheometer in the shear rate range 10¹–10⁴ s^?1 at a fixed temperature of 240°C. The data presented as conventional flow curves are analyzed for the effect of blend composition and shear rate on pseudoplasticity, melt viscosity, and melt elasticity, and role of each individual component is identified. Morphology of dispersed phases of these blends is studied through scanning electron microscopy of the cryogenically fractured and suitably etched surfaces. Variations of morphology with blend composition and shear rate showed interesting correlation with melt rheological properties, which are discussed in detail. An important finding of the morphological studies is that in the PP/SEBS/PC ternary blend the SEBS phase forms two types of morphologies depending on the blend composition and shear rate: (i) simple droplets and (ii) boundary layer at the surface of the PC droplets. © 1993 John Wiley & Sons, Inc.     

电镀行业环境无害化技术需求调查分析

通过对电镀行业基本情况调查,介绍了我国电镀行业的规模以及三废治理现状,针对电镀企业在减少污染,合理利用资源,节约能源等方面的技术需求,以及在应用环境无害化技术时遇到的主要困难,提出了解决办法和电镀行业 发展的政策性建议。     

Explicit finite difference scheme for nonlinear convective problems

An explicit finite difference scheme is proposed for nonlinear convective problems. The procedure is applied to a nonlinear convective diffusion problem with a nonlinear boundary condition. It is shown that the nonlinear boundary condition may be treated directly without linearization which has to be carried out in the implicit method to avoid a nonlinear system of algebraic equations. The explicit procedure is more direct and less cumbersome than the implicit procedure and the answers are in excellent agreement with those of the implicit method.     

An electrochemically regenerative hydrogen-chlorine energy storage system: electrode kinetics and cell performance

The electrochemical oxidation and reduction of hydrogen and chlorine in hydrochloric acid has been investigated on graphite, ruthenized titanium and platinum electrodes. Both steady state and potentiostatic pulse methods were used. Cell studies were also carried out in cells with flow-by and flow-through chlorine electrodes. Results indicate that the electrode kinetics are fast and the electrolysis and fuel cell reactions can be carried out in the same cell with electric-to-electric efficiencies in excess of 75% at current densities of 300 mA cm^–2. Mass transfer limitations at the chlorine electrode during discharge can be eliminated by cell pressurization and the use of flow-through electrodes.This study was carried out under the auspices of the US Department of Energy.in the summers of 1976 and 1977