Specification methods for material-handling control algorithms in flexible manufacturing systems

Good methods are needed to specify, test, and debug material-handling control logic. This article surveys a number of representative methods for defining and describing control algorithms for programmable material-handling equipment used in flexible manufacturing systems. The methods are evaluated with regard to their suitability for communication between people and as bases for interfaces to automatic program generators. It is concluded that no single method is entirely satisfactory. Three methods (position diagrams, function block diagrams, and operation networks) have potential to be combined into an effective hybrid approach that minimizes the need for the user to switch between various conceptual models.     

Improved Matrix-Filler Adhesion

Enhanced matrix-filler adhesion is realized after filler treatment with a surface treatment process. The hydrosol/coupling agent treatment was applied to a wide range of inorganic and organic fillers, and adhesion to a variety of matrix resins was improved. Scanning Electron Microscopy (SEM) was used to determine the locus of failure in the filled systems. The locus of failure shows the relative degree of adhesion between the filler and the polymer matrix. Significant improvement in adhesion in humid environments is also observed.     

Perceiving exterior letters of words: Differential influences of letter-fragment and non-letter-fragment masks.

Previous research shows letter-fragment masks and non-letter-fragment fields have different effects on performance with briefly presented alphabetic targets. However, popular accounts of these differences ignore mask configuration. Over a series of experiments, configurational effects of letter-fragment (LF) and non-letter-fragment (NLF) masks were compared. When the configuration of LF masks matched word boundaries, performance with exterior letter pairs from words improved, whereas performance with illegal exterior-letter pairs and single letters was unaffected. When the same changes were made to NLF masks, only an overall drop in performance occurred, with no selective effect on target type. Although LF mask configuration selectively affected lexical processing, NLF mask configuration produced substantially different effects, indicating problems with contemporary accounts of masking differences that ignore influences of mask configuration. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Kinetics of zinc oxide formation from zinc sulfide by reaction with lime in the presence of water vapor

A novel reaction scheme for transforming certain metal sulfides to the corresponding oxides has been developed. In this process, steam oxidizes the sulfide into the oxide, and the hydrogen sulfide produced reacts with lime to form calcium sulfide and regenerate steam. There is no net consumption or generation of gaseous species. Thus, the overall reaction can be carried out in a closed system as far as the gas phase is concerned. This eliminates the possibility of emitting hydrogen sulfide out of the reactor. Only certain metal sulfides are thermodynamically amenable to this treatment. In this paper, the reaction of ZnS to ZnO by this scheme is described, together with a detailed formulation of the rate equation for the overall reaction based on the kinetics of the component gas-solid reactions. Although the present work was done with CaO, other suitable oxides may be used in its place. A further potential application of this process is to the selective oxidation of certain sulfide(s) from complex sulfide ores as a treatment prior to the separation of minerals.     

BioFET sensor for detection of albumin in urine

Characterisation of a BioFET for detection of albumin in a mixture of human urine is presented. To avoid electrolyte effect of the urine, it was measured in PBS (phosphate buffer saline) at a fixed pH after albumin binding. The drain current was modulated by the albumin bound to the anti-albumin immobilised on the gate surface of the BioFET. The current variation ratio was likely to be proportional to the concentration of the albumin in the range 50-250 mg/1. The results show the feasibility of the BioFET as a urinary albumin sensor.     

Line balancing in a just-in-time production environment: balancing multiple U-lines

The introduction of multiple, independent production lines has helped many firms to increase their production flexibility, provide for redundancy when equipment breaks down, reduce idle time and labor costs, and achieve many other benefits. This paper introduces and formalizes the multiple U-line balancing problem. Optimal solution methodologies are provided for Type I (minimize the number of stations for a given cycle time), Type II (minimize the cycle time for a given number of stations), and cost-minimization line-balancing problems. A branch-and-bound algorithm is also developed for the situation in which equipment requirements are dependent on the line configuration and the task assignment to stations. Computational results indicate that the greatest benefit of exploiting multiple lines occurs for smaller cycle-time problems that require higher output.     

Improving manufacturing by cost-effective process modeling

Computer-aided engineering tools are routinely used to simulate forging and heat-treatment operations and to perform thermal and stress analyses. This review gives a few examples of the current uses of process modeling tools and outlines some developing capabilities and near-term applications.     

Designing screens for people to use easily

The use of interactive computer systems is expanding rapidly. In many applications users can communicate directly with computer-based systems through an interactive dialogue at a display terminal. However, this direct form of communication has created problems. Whereas early users of on-line systems were skilled computer professionals, today's users may have little or no training in computer technology. How then does this group communicate effectively with a computer systems?

The answer is that many users communicate only with considerable difficulty. The result is that the effectiveness of many systems is very much less than expected. The reason for this is simple: these systems are not very good at communicating with their users.

The most common communications bridge between a person and a computer system is a display screen. A well-designed screen format can enhance user productivity, eliminate or reduce user input errors, and promote end user satisfaction. A poorly designed screen has the opposite effect: it will decrease human processing speed, provoke user mistakes, and complicate computer operations.

Screen design requires the same care as designing the overall application. It employs the same techniques as planning and preparing good user documents. Screens, like documents, must be easy to understand and easy to use. To achieve these objectives, screen designers must make good choices regarding three ease-of-use parameters: format; screen content and layout; and style. This paper describes how standards may be established for each of these parameters in a proposed application or system. Futher, an interactive tutorial computer program has been developed (using Bricklin's DEMO program) which may be used to illustrate the application of these standards.