Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

微晶纤维素增粘剂的研制

以棉浆为原料，废盐酸为水解催化剂，所得合成革用微晶纤锥素增粘剂的质量指标达到了德国和日本同类产品的标准。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

CAN总线在细纱机控制系统中的应用

分析了CAN总线在细纱机控制系统中的可行性,介绍了基于ColdFire MCF52235的细纱机控制系统的构成和PLC编程,并给出了单锭CAN节点的软件设计方案。     

Haptic teleoperation of a multirotor aerial robot using path planning with human intention estimation

Classical haptic teleoperation systems heavily rely on operators’ intelligence and efforts in aerial robot navigation tasks, thereby posing significantly users’ workloads. In this paper, a novel shared control scheme is presented facilitating a multirotor aerial robot haptic teleoperation system that exhibits autonomous navigation capability. A hidden Markov model filter is proposed to identify the intention state of operator based on human inputs from haptic master device, which is subsequently adopted to derive goal position for a heuristic sampling based local path planner. The human inputs are considered as commanded velocity for a trajectory servo controller to drive the robot along the planned path. In addition, vehicle velocity is perceived by the user via haptic feedback on master device to enhance situation awareness and navigation safety of the user. An experimental study was conducted in a simulated and a physical environment, and the results verify the effectiveness of the novel scheme in safe navigation of aerial robots. A user study was carried out between a classical haptic teleoperation system and the proposed approach in the identical simulated complex environment. The flight data and task load index (TLX) are acquired and analyzed. Compared with the conventional haptic teleoperation scheme, the proposed scheme exhibits superior performance in safe and fast navigation of the multirotor vehicle, and is also of low task and cognitive loads.

     

Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

A setup for panoramic stereo imaging

In this paper, based on the proposed basic implementation of circular projection, a multi-camera setup which can be used for panoramic stereo imaging is presented. Firstly, we get multiple stereo pairs instantly by fixing multiple cameras on the proposed setup, which is an approximate implementation of circular projection. We then prove that the influence on the resultant stereo pairs generated by this approximate setup is slight based on similar triangles and structural similarity (SSIM). With these stereo pairs, the automatic panoramic image stitching algorithm is applied to generate panoramas for both eyes. In addition, with reasonable distance between cameras and the scene, physical dimensions of this setup are given. Finally, experimental results demonstrate that our scheme can be used to generate cylindrical stereo panoramic image with proper scene depth, which can provide viewers with distinguishing stereoscopic experience. The device can be installed on the mobile equipment and captures panoramic stereo image in a moment without stopping. In the future, the proposed setup can be used in the field of network navigation, video monitor and virtual reality.     

New insights on survivability in multi-domain optical networks

With the development of intelligent optical networks and the general multi-protocol label switching (GMPLS) technique, the seamless convergence between IP network and optical network is no longer be a dream but a practical reality. Similar to the Internet, current optical networks have been divided into multiple domains each of which has its own network provider and management policy. Therefore, the development of multi-domain optical networks will be the trend of new-generation intelligent optical networks, and GMPLS-based survivability for multi-domain optical networks will become a hot topic of research in the future. This paper provides a comprehensive review of the existing survivable schemes in multi-domain optical networks and analyzes the shortcomings of current research. Based on previous studies, we present possible challenges and propose new ideas to design efficient survivable schemes to guide the future work of researchers in multi-domain optical networks.     

Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.     

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Despite the outstanding power conversion efficiency (PCE) of perovskite solar cells (PSCs) achieved over the years, unsatisfactory stability and lead toxicity remain obstacles that limit their competitiveness and large-scale practical deployment. In this study, in situ polymerizing internal encapsulation (IPIE) is developed as a holistic approach to overcome these challenges. The uniform polymer internal package layer constructed by thermally triggered cross-linkable monomers not only solidifies the ionic perovskite crystalline by strong electron-withdrawing/donating chemical sites, but also acts as a water penetration and ion migration barrier to prolong shelf life under harsh environments. The optimized MAPbI₃ and FAPbI₃ devices with IPIE treatment yield impressive efficiencies of 22.29% and 24.12%, respectively, accompanied by remarkably enhanced environmental and mechanical stabilities. In addition, toxic water-soluble lead leakage is minimized by the synergetic effect of the physical encapsulation wall and chemical chelation conferred by the IPIE. Hence, this strategy provides a feasible route for preparing efficient, stable, and eco-friendly PSCs.