Alkylation of naphthalene with alcohols over mesoporous MCM-41

Mesoporous MCM-41 is found to promote alkylation of naphthalene by alcohols. In addition to the preferred branched side chain productsn-alkylated product is also observed in the case of propylation of naphthalene.     

Formation of Zinc–Antimony-Based Spinel Phases

Formation of spinel phases in ZnO–Sb₂O₃and ZnO–Sb₂O₃–Bi₂O₃systems is studied by the use of X-ray diffraction. The formation of nonstoichiometric Zn_2.33Sb_0.67O₄phase is observed in both the systems at ∼900°C. However, in these systems, at higher temperatures ( T ≥ 1100°C), formation of the inverse spinel phase Zn₇Sb₂O₁₂is observed. The study has been extended to understand the effect of CrO₃doping on the stability of the different spinel phases in the previously mentioned systems. Interestingly, in both the systems, samples doped with CrO₃, displayed the presence of Zn_2.33Sb_0.67O₄phase <1200°C, indicating the stabilization of the spinel phase by CrO₃.     

Disorder in cellulosic fibers

Ruland's concept of an isotropic disorder function is applied to estimate the disorder parameter and the degree of crystallinity in a few cellulosic fibers: two cottons, native ramie, and a high-tenacity rayon. The results indicate an increase in disorder without any change in crystallinity on mercerization of native celluloses. On hydrolysis, with or without a pretreatment of mercerization, the samples exhibit a higher crystallinity, disorder remaining the same as for native celluloses. A ball-milled sample of “amorphous” cellulose is still found to be fairly crystalline with the lowest disorder. On being wetted in water and oven-dried, a distorted form of cellulose II with higher crystallinity and disorder was obtained. The polynosic fiber, Tufcel, has low values for the degree of crystallinity, disorder parameter, as well as crystallite dimension. A strong dependence of the degree of crystallinity on the crystallite size, particularly the lateral, is observed.     

INVISCID LIQUID CIRCULATION IN BUBBLE COLUMNS

For circulation in axi-symmetric (cylindrical) bubble columns, the recently developed mathematical model^25,26 has been used along with the criterion of minimum circulation strength to determine the height of each circulation cell in a tall column. This is then used to derive a theoretical expression, first of its kind, for gas hold-up inside a bubble column. The predictions of this equation as well as the equation derived here for axial liquid velocity at column axis have been compared with available data and the comparison is found to be excellent for both the variables. An explicit relation is derived for the average liquid circulation velocity. The model is also used to derive an expression for liquid axial dispersion coefficient which compares almost exactly with Deckwer et al.'s⁴ correlation.

For circulation in two-dimensional bubble columns a new mathematical model is developed. The predictions of bubble envelope shape and bubble envelope area compare well with published data. The predictions of number of circulation cells in the horizontal direction also compare well with published data.     

Using solidification parameters to predict porosity distributions in alloy castings

Quality criteria used in the computer-aided design and analysis of casting processes typically relate geometric, thermal, or solidification parameters to structural features such as centerline shrinkage and microporosity. Quality criteria for the prediction of porosity in castings have been used successfully in steel, but the application of criteria functions to nonferrous alloys has been less successful. Recent work suggests that the dominating mechanism that determines the amount and distribution of porosity in castings is strongly dependent on the solidification mode of the alloy and the solidification conditions. Accordingly, casting processes and alloy types are divided into four groups, and a different set of criteria functions are obtained for each group.     

Managing supply systems with partial information on shipment locations

This paper studies a supply system for a retailer who orders a single product from one manufacturer. Orders filled by the manufacturer pass through multiple transportation stages before reaching the retailer. Each stage represents either a physical location or a step in the delivery process. The lead time for a new order depends on the location of shipments against prior orders in transit. Shipments are not allowed to cross over in time. Thus, the movement of each shipment depends on the movements of shipments ahead of it and the resulting congestion. The retailer is able to track shipments as they move through the transportation channel. The retailer adopts an ordering policy that minimises the sum of his one-period holding and shortage costs, using available status information of shipments already in transit. The case where practical constraints prevent the retailer from obtaining a complete status of shipments at all stages in the transportation channel is considered. The methodology developed evaluates the value of partial shipment tracking information, and uses it to determine the optimal placement of a limited number of tracking devices. The methodology can also be used to evaluate the cost–benefit of placing additional tracking devices in the supply system.     

Parallelization of a dynamic SVD clustering algorithm and its application in information retrieval

We describe an implementation of a parallel document clustering scheme based on latent semantic indexing, which uses singular value decomposition. Given a set of documents, the clustering algorithm is dynamic in the sense that it automatically infers the number of clusters to be output. The parallel version has been implemented on a LAN and on a dual‐core system. Experimental evaluation of the algorithm shows an average speed‐up of 6.22 for the LAN implementation and an average speed‐up of 3.71 for the dual‐core implementation, while still maintaining a precision and recall in the range [0.85, 1]. To put these implementations in the context of information retrieval, we use the parallel clustering algorithm and develop a document similarity search system. The similarity search system shows good performance in terms of precision and recall. Copyright © 2010 John Wiley & Sons, Ltd.     

Induction motor fault detection and diagnosis using a current state space pattern recognition

In the last few decades the continuous monitoring of complex dynamic systems has become an increasingly important issue across diverse engineering areas. This paper presents a pattern recognition based system that uses visual-based efficient invariants features for continuous monitoring of induction motors. The procedures presented here are based on the image identification of the 3-D current state space patterns that allow the identification of distinct fault types and, furthermore, their corresponding severity. This automatic fault detection system deals with time-variant electric currents and is based on the identification of three-phase stator currents specified patterns. Several simulation and experimental results are also presented in order to verify the effectiveness of the proposed methodology.     

Effect of stress and temperature on the creep and rupture behavior of a 1.25 Pct chromium—0.5 Pct molybdenum steel

The creep and stress rupture behavior of a normalized 1.25 pct chromium-0.5 pct molybdenum steel has been investigated over a temperature (T) range of 510 to 620°C and a stress(σ) range of 65 to 425 MN/m². The creep rate ( ) and time to rupture (t _r ) data have been analyzed in terms of the general expression ort _r -A σⁿ exp (Q/RT), whereA is a constant,n is the power exponent of stress,Q is an empirical activation energy for the rate controlling process andR is the universal gas constant. At each temperature, the logarithmic plots of creep rate and time to rupture as functions of stress consist of two linear segments, separating the data into low stress and high stress regimes. The stress exponent has approximate values of 4 and 10 in the low stress and high stress regimes respectively in the appropriate expressions for both creep rate and for time to rupture. The activation energy has values of 367 and 420 kJ/mole in the low stress regime for time to rupture and creep rate respectively. In the high stress regime, the respective values of activation energy are 581 and 670 kJ/mole. Fractographic observations show that the changes from low stress to high stress behavior in creep rate and time to rupture approximately coincide with the transition in fracture mode from intergranular to transgranular cracking as well as with the transition in the rupture ductility from a region of linear variation with stress to one of constant ductility. These observations suggest that the transition from low stress to high stress behavior may be associated with a change in deformation mode from predominantly grain boundary sliding at low stress to transgranular matrix deformation at high stress. Analysis of the creep rate data based on this premise enables calculation of the ratio of the contributions of the grain boundary sliding mode to the total deformation (ε _gb /ε _T ) at various values of stress and temperature. Results of this analysis are consistent with numerous experimental observations reported in the literature.     

Comments on “A novel dead time compensator for stable processes with long dead times” [Journal of Process Control 22 (2012) 612–625]

This short communication analyzes the results recently presented in the paper “On a novel dead time compensator for stable processes with long dead times” published in the Journal of Process Control. In the mentioned paper it is argued that the proposed strategy, called modified Smith predictor (MSP), gives better performance than the filtered Smith predictor (FSP) dead-time compensator for stable processes with dead time. In fact MSP has the same structure as FSP and only some specific tuning rules of the filters are proposed. Therefore, in this work some aspects of the comparative analysis and tuning rules presented in the referred paper are discussed to show that MSP is a particular case of FSP and that for some particular cases its tuning rule does not allow for a good closed-loop response. Some simulation case studies are used to illustrate these aspects.