Crystal Growth of Thiol-Stabilized Gold Nanoparticles by Heat-Induced Coalescence

A monolayer of dodecanethiol-stabilized gold nanoparticles changed into two-dimensional and three-dimensional self-organized structures by annealing at 323 K. Subsequent crystal growth of gold nanoparticles occurred. Thiol molecules, although chemisorbed, form relatively unstable bonds with the gold surface; a few thiols desorbed from the surface and oxidized to disulfides at 323 K, because the interaction energy between thiol macromolecules is larger than that between a thiol and a nanoparticle. The gold nanoparticles approached each other and grew into large single or twinned crystals because of the van der Waals attraction and the heat generated by the exothermic formation of disulfides.     

Correction of instrument measurement data for improving the visual color match between monitor and hardcopy

Abstract— Soft proofing, which can confirm the color reproduction of printed matter on a monitor, is coming into wide use in the field of graphic arts. However, there is a problem in that the color on the monitor looks different from that of printed matter, even though the L*a*b* value of the monitor's white point has been adjusted to that of the paper by using a spectroradiometer. After the color rendition of an LCD is visually adjusted to that of the paper, the measured color of the LCD shows color with L*a*b* values corresponding to a more greenish‐blue white than that of paper. For CRTs, this corresponds to a more bluish‐white. In this paper, it was assumed that bright lines in the measured spectrums of the monitors and the illuminations spread to the next wavelength band by the optical systems of the spectroradiometer. To solve the problem, a method is proposed to enhance the bright line by using a three‐tap digital filter. The effect of this method on two types of monitors under three types of illumination is also reported. After enhancing the bright lines, ΔE between the monitor and paper becomes smaller than that for the original one.     

Rapid Reconstitution of Biosynthetic Machinery for Fungal Metabolites in Aspergillus oryzae: Total Biosynthesis of Aflatrem

Reconstitution of the biosynthetic machinery for fungal secondary metabolites in Aspergillus oryzae provides an opportunity both for stepwise determination of the biosynthetic pathways and the total biosynthesis of fungal natural products. However, to maximize the utility of the reconstitution system, a simple and rapid strategy for the introduction of heterologous genes into A. oryzae is required. In this study, we demonstrated an effective method for introducing multiple genes involved in the biosynthesis of fungal metabolites by using the expression vectors pUARA2 and pUSA2, each of which contains two cloning sites. The successful introduction of all the aflatrem biosynthetic genes (seven genes in total) after two rounds of transformation enabled the total biosynthesis of aflatrem. This rapid reconstitution strategy will facilitate the functional analysis of the biosynthetic machinery of fungal metabolites.     

Tensile fatigue behaviour of ultra-high performance fibre reinforced concrete (UHPFRC)

The tensile fatigue behaviour of ultra-high performance fibre reinforced concrete (UHPFRC) under constant amplitude fatigue cycles is presented. Three series of uniaxial tensile fatigue tests up to a maximum of 10 million cycles were conducted with the objective to determine the endurance limit of UHPFRC that was supposed to exist for this material. The fatigue tests reveal that an endurance limit exists in all three domains of UHPFRC tensile behaviour at S-ratios ranging from 0.70 to 0.45 with S being the ratio of the maximum fatigue stress to the elastic limit strength of UHPFRC. Rather large variation in local specimen deformations indicates significant stress and deformation redistribution capacity of the UHPFRC bulk material enhancing the fatigue behaviour. The fatigue fracture surface of UHPFRC shows features of the fatigue fracture surfaces of steel, i.e. fatigue crack propagation is identified by a smooth surface while final fracture leads to rather rough surface. Various fatigue damaging mechanisms due to fretting and grinding as well as tribocorrosion are identified.     

On constructing communication protocols from component-based service specifications

Constructing communication protocols from component service specifications, each of which specifies a subfunction of the target protocol, enables efficient development of a large and complex communication protocol. Concerning this construction, related techniques have been already proposed: integration of component protocol specifications into a single protocol specification and transformation of service specifications to protocol specifications. However, the integration needs special knowledge of communication protocols, and the transformation requires that a large and complex service specification should be developed as input to produce the target protocol. In order to cope with these problems, this paper proposes a new method which at first integrates component service specifications into a single service specification, and then transforms the service specification into the target protocol by a protocol synthesis technique. The most important point of view is that component integration is performed at the service specification level rather than the protocol specification level. Additionally, we define a class of ‘well-formed’ service specification which ensures correctness of the target protocol. As a result, the integration and transformation can be efficiently executed in small state space without special knowledge of communication protocols. Finally, we have shown the effectiveness of the proposed method by constructing a part of the real-life OSI protocol FTAM.     

A new type of nanocomposite in tetragonal zirconia polycrystal-molybdenum system

A ceramic/metal nanocomposite in tetragonal zirconia-molybdenum system possesses a novel microstructural feature composed of a mutual intragranular nanostructure, in which either nanometer sized Mo particles or equivalent sized zirconia particles are located within the zirconia grains or Mo grains, respectively. It achieves a simultaneous improvement in strength and toughness that overcomes the strength-toughness tradeoff relation.     

Electrochemical conversion of carbon dioxide to methane in aqueous NaHCO3 solution at less than 273 K

The electrochemical reduction of CO₂ on a Cu electrode was investigated in aqueous NaHCO₃ solution, at low temperature. A divided H-type cell was employed, the catholyte was 0.65 mol dm⁻³ NaHCO₃ aqueous solution and the anolyte was 1.1 mol dm⁻³ KHCO₃ aqueous solution. The temperature during the electrolysis of CO₂ was decreased stepwise to 271 K. Methane and formic acid were obtained as the main products. The maximum Faradaic efficiency of methane was 46% at −2.0 V and 271 K. The efficiency of hydrogen formation, a competing reaction of CO₂ reduction, was significantly depressed with decreasing temperature. Based on the results of this work, the proposed electrochemical method appears to be a viable means for removing CO₂ from the atmosphere and converting it into more valuable chemicals. The synthesis of methane by the electrochemical method might be of practical interest for fuel production and the storage of solar energy.