Titanium–tin oxide protective films on a black cobalt photothermal absorber

We report the effect of covering an electrodeposited black cobalt absorber film with a Ti : Sn oxide film at various atomic ratios prepared by the sol–gel dip process. The resulting composite was characterized in its optical, structural and morphological properties. After thermal treatment at 400°C, the uncoated black cobalt film is oxidized and Co₃O₄ is formed. Samples covered with Ti : Sn films and thermally treated at the same temperature suffered lower oxidation maintaining in great extent the original metallic cobalt structure. The optical properties of the resulting material were affected by the presence of the Ti : Sn coating, and the best protective film obtained was a transparent Ti : Sn (8 : 2) atomic ratio oxide film, with a 210 nm thickness. This composite system exhibits an absorptance value of 0.91 and an emittance value of 0.34 after a 100 h, 400°C thermal treatment. A photothermal material composed of a layer of black cobalt and a protective oxide film coating seems then a promising solar energy absorber capable of withstanding high operating temperatures (400°C).     

Extracellular Prion Protein Aggregates in Nine Gerstmann–Sträussler–Scheinker Syndrome Subjects with Mutation P102L: A Micromorphological Study and Comparison with Literature Data

Gerstmann–Sträussler–Scheinker syndrome (GSS) is a hereditary neurodegenerative disease characterized by extracellular aggregations of pathological prion protein (PrP) forming characteristic plaques. Our study aimed to evaluate the micromorphology and protein composition of these plaques in relation to age, disease duration, and co-expression of other pathogenic proteins related to other neurodegenerations. Hippocampal regions of nine clinically, neuropathologically, and genetically confirmed GSS subjects were investigated using immunohistochemistry and multichannel confocal fluorescent microscopy. Most pathognomic prion protein plaques were small (2–10 µm), condensed, globous, and did not contain any of the other investigated proteinaceous components, particularly dystrophic neurites. Equally rare (in two cases out of nine) were plaques over 50 µm having predominantly fibrillar structure and exhibit the presence of dystrophic neuritic structures; in one case, the plaques also included bulbous dystrophic neurites. Co-expression with hyperphosphorylated protein tau protein or amyloid beta-peptide (Aβ) in GSS PrP plaques is generally a rare observation, even in cases with comorbid neuropathology. The dominant picture of the GSS brain is small, condensed plaques, often multicentric, while presence of dystrophic neuritic changes accumulating hyperphosphorylated protein tau or Aβ in the PrP plaques are rare and, thus, their presence probably constitutes a trivial observation without any relationship to GSS development and progression.     

Influence of different histories of the inoculum on lag phase and growth of Listeria monocytogenes in meat models

The aim of this study was to determine the effect of history of inoculum and preservatives on the lag phase and growth rate of Listeria monocytogenes strains in meat products packaged under modified atmosphere conditions. Inocula with different histories were added to meat models, and growth rate and lag phase of two strains of L. monocytogenes were measured at 5 and 10 degrees C. The meat model stored at 10 degrees C contained sodium lactate, but the model stored at 5 degrees C did not. The five different histories of the inocula included cold propagation, biofilm formation, and starvation. The lag phase ranged from 1 to 10 days and was affected by the history of the inoculum, whereas the growth rate was constant except for one combination of history of inoculum and strain, where growth did not start during the incubation period. In a second series of experiments, the growth rate and lag phase of the two Listeria strains and the effects of two different histories of inoculum were tested in meat models with pH 5.7 or 6.5 and increasing amounts of NaCl. The growth rate depended on salt concentration, bacterial strain, and pH, whereas lag phase duration depended on history of inoculum, salt concentration, and pH. The lag phase duration was highly dependent on the history of the inoculum, and higher amounts of preservative (NaCl) made these effects even more noticeable. The results of this study underline the importance of the effects of the history of the inoculum on lag phase duration and could be used to predict lag phase in industrial meat products.     

Extrusion of polyethylene/polypropylene blends with microfibrillar‐phase morphology

Extrusion of immiscible polymers under special conditions can lead to creation of microfibrillar‐phase morphology, ensuring significant increase of mechanical properties of polymer profiles. Polyethylene/polypropylene blend extrudates with microfibrillar‐phase morphology (polypropylene microfibrils reinforcing polyethylene matrix phase) were prepared through continuous extrusion with semihyperbolic‐converging die enabling elongation and orientation of microfibrils in flow direction. Structure of extruded profiles was examined using electron microscopy and wide‐angle X‐ray scattering. Tensile tests proved that extrudates with microfibrillar‐phase morphology show significantly higher mechanical properties than the conventional extrudates. The presented concept offers possibility of replacing the existing expensive multi‐component medical devices with fully polymeric tools. POLYM. COMPOS., 31:1427–1433, 2010. © 2009 Society of Plastics Engineers     

Integrated Circuits Based on Bilayer MoS(2) Transistors

Two-dimensional (2D) materials, such as molybdenum disulfide (MoS(2)), have been shown to exhibit excellent electrical and optical properties. The semiconducting nature of MoS(2) allows it to overcome the shortcomings of zero-bandgap graphene, while still sharing many of graphene's advantages for electronic and optoelectronic applications. Discrete electronic and optoelectronic components, such as field-effect transistors, sensors, and photodetectors made from few-layer MoS(2) show promising performance as potential substitute of Si in conventional electronics and of organic and amorphous Si semiconductors in ubiquitous systems and display applications. An important next step is the fabrication of fully integrated multistage circuits and logic building blocks on MoS(2) to demonstrate its capability for complex digital logic and high-frequency ac applications. This paper demonstrates an inverter, a NAND gate, a static random access memory, and a five-stage ring oscillator based on a direct-coupled transistor logic technology. The circuits comprise between 2 to 12 transistors seamlessly integrated side-by-side on a single sheet of bilayer MoS(2). Both enhancement-mode and depletion-mode transistors were fabricated thanks to the use of gate metals with different work functions.     

Carbon nanotube-based nanocarriers: the importance of keeping it clean

Nanotechnology-introduced materials have promising applications as nanocarriers for drugs, peptides, proteins and nucleic acids. Several studies showed that the geometry (shape and size) and chemical properties of nanoparticles affect the kinetics and pathways of cellular uptake and their intracellular trafficking and signaling. Accurate physico-chemical characterization of nanoparticles customarily precedes their use in cell biology and in vivo experiments. However, a fact that is easily overlooked is that nanomaterials decorated with organic matter or resuspended in aqueous buffers can be theoretically contaminated by fungal and bacterial microorganisms. While investigating the effects of extensively characterized PEGylated carbon nanotubes (PNTs) on T lymphocyte activation, we demonstrated bacterial contamination of PNTs, which correlated with low reproducibility and artifacts in cell signaling assays. Contamination and artifacts were easily eliminated by preparing the materials in sterile conditions. We propose that simple sterile preparation procedures should be adopted and sterility evaluation of nanoparticles should be customarily performed, prior to assessing nanoparticle intracellular internalization, trafficking and their effects on cells and entire organisms.     

Temperature dependence of cohesive laws for an epoxy adhesive in Mode I and Mode II loading

The influence of the temperature on the cohesive laws for an epoxy adhesive is studied in the glassy region, i.e. below the glass transition temperature. Cohesive laws are derived in both Mode I and Mode II under quasi-static loading conditions in the temperature range $-30\le T \le 80^{\,\circ }$ C. Three parameters of the cohesive laws are studied in detail: the elastic stiffness, the peak stress and the fracture energy. Methods for determining the elastic stiffness in Mode I and Mode II are derived and evaluated. Simplified bi-linear cohesive laws to be used at any temperature within the studied temperature range are derived for each loading mode. All parameters of the cohesive laws are measured experimentally using only two types of specimens. The adhesive has a nominal layer thickness of 0.3 mm and the crack tip opening displacement is measured over the adhesive thickness. The derived cohesive laws thus represent the entire adhesive layer as having the present layer thickness. It is shown that all parameters, except the Mode I fracture energy, decrease with an increasing temperature in both loading modes. The Mode I fracture energy is shown to be independent of the temperature within the evaluated temperature span. At $80^{\,\circ }$ C the Mode II fracture energy is decreased to about 2/3 of the fracture energy at $-30^{\,\circ }$ C. The experimental results are verified by finite element analyses.