Development of an early estimation method for predicting later osteogenic differentiation activity of rat mesenchymal stromal cells from their attachment areas

Cell morphology has received considerable attention in recent years owing to its possible relationship with cell functions, including proliferation, differentiation, and migration. Recent evidence suggests that extracellular environments can also mediate cell functions, particularly cell adhesion. The aims of this study were to investigate the correlation between osteogenic differentiation activity and the morphology of rat mesenchymal stromal cells (MSCs), and to develop a method of estimating osteogenic differentiation capability of MSCs on biomaterials. We measured the attachment areas of MSCs on substrates with various types of surface after 2 h of seeding, and quantified the amount of osteocalcin secreted from MSCs after 3 weeks of culture under osteogenic differentiation conditions. MSCs with small attachment areas showed a high osteogenic differentiation activity. These findings indicate that cell attachment areas correlate well with the osteogenic differentiation activity of MSCs. They also suggest that the measurement of cell attachment areas is useful for estimating the osteogenic differentiation activity of MSCs and is a practical tool for applications of MSCs in regenerative medicine.     

Reverse engineering of machining operation planning

Computer-aided process planning (CAPP) is becoming increasingly crucial to today's computer-integrated manufacturing (CIM) and rapid production. To automate the process planning, feature-based operation planning systems have been suggested and studied extensively. In such a system, given a machining feature, the operator requires practical machining operation data for the feature. In this research, a system of reverse engineering is proposed to extract machining features and their associated machining operation data. Furthermore, a machining know-how database containing the extracted data is created for future operation planning. Since successful NC programs contain the machining know-how of skilled workers, the system is aimed at extracting the machining know-how data from the NC programs through reverse engineering. The extraction of the machining features and feature topologies has been addressed previously. The present paper deals with the extraction of machining operation data, including operation sequence, cutting conditions, machining type and cutting mode. A prototype of the system is developed and a machining know-how database is generated. The extraction of machining features and their associated machining operations has been verified through a variety of NC programs.     

Fracture toughness improvement of CFRP laminates by dispersion of cup-stacked carbon nanotubes

Several techniques are introduced to enhance the interlaminar fracture toughness of CFRP laminates using cup-stacked carbon nanotubes (CSCNTs). Prepared CSCNT-dispersed CFRP laminates are subject to Double Cantilever Beam (DCB) and End Notched Flexure (ENF) tests in order to obtain mode-I and mode-II interlaminar fracture toughness. The measured fracture toughnesses are compared to that of CFRP laminates without CSCNT to evaluate the effectiveness of CSCNT dispersion for the improvement of fracture toughness. All CSCNT-dispersed CFRP laminates exhibit higher fracture toughness, and specifically, CSCNT-dispersed CFRP laminates with thin epoxy interlayers containing short CSCNTs have three times higher fracture toughness than CFRP laminates without CSCNT. SEM observation of fracture surfaces is also conducted to investigate the mechanisms of fracture toughness improvement. Crack deflection mechanism is recognized in the CSCNT-dispersed CFRP laminates, which is considered to contribute the enhancement of interlaminar fracture toughness.     

Hot corrosion tests with the NRIM burner rig

Salt-induced high temperature corrosion of superalloys has been studied with a burner rig. Results of investigations into the effects of alloying. composotion on hot corrosion behaviour of nickel-base superalloys, the effects of testing condtions on hot corrosion behaviour of a high-tungsten alumina-forming nickel-base superalloy and hot corrosion of a CoCrAlY-coated superalloy are reported.     

Micromorphological effect of calcium phosphate coating on compatibility of magnesium alloy with osteoblast

Abstract

Octacalcium phosphate (OCP) and hydroxyapatite (HAp) coatings were developed to control the degradation speed and to improve the biocompatibility of biodegradable magnesium alloys. Osteoblast MG-63 was cultured directly on OCP- and HAp-coated Mg-3Al-1Zn (wt%, AZ31) alloy (OCP- and HAp-AZ31) to evaluate cell compatibility. Cell proliferation was remarkably improved with OCP and HAp coatings which reduced the corrosion and prevented the H₂O₂ generation on Mg alloy substrate. OCP-AZ31 showed sparse distribution of living cell colonies and dead cells. HAp-AZ31 showed dense and homogeneous distribution of living cells, with dead cells localized over and around corrosion pits, some of which were formed underneath the coating. These results demonstrated that cells were dead due to changes in the local environment, and it is necessary to evaluate the local biocompatibility of magnesium alloys. Cell density on HAp-AZ31 was higher than that on OCP-AZ31 although there was not a significant difference in the amount of Mg ions released in medium between OCP- and HAp-AZ31. The outer layer of OCP and HAp coatings consisted of plate-like crystal with a thickness of around 0.1 μm and rod-like crystals with a diameter of around 0.1 μm, respectively, which grew from a continuous inner layer. Osteoblasts formed focal contacts on the tips of plate-like OCP and rod-like HAp crystals, with heights of 2–5 μm. The spacing between OCP tips of 0.8–1.1 μm was wider than that between HAp tips of 0.2–0.3 μm. These results demonstrated that cell proliferation depended on the micromorphology of the coatings which governed spacing of focal contacts. Consequently, HAp coating is suitable for improving cell compatibility and bone-forming ability of the Mg alloy.     

Development of CZTS-based thin film solar cells

The low cost, environmental harmless Cu₂ZnSnS₄ (CZTS)-based thin film solar cells are fabricated by using abundant materials. The CZTS film possesses promising characteristic optical properties; band-gap energy of about 1.5 eV and large absorption coefficient in the order of 10⁴ cm^− 1. All constituents of this CZTS film, which are abundant in the crust of the earth, are non-toxic. Therefore, if we can use CZTS film practically as the absorber of solar cells, we will be free from both of the resource saving problem and the environmental pollution.In our CZTS project, CZTS absorber films were prepared by two independent techniques. One is three rf sources co-sputtering followed by annealing in sulfurized atmosphere. The latest conversion efficiency of over 6.7% was achieved by this technique. The other is co-evaporation technique. CZTS films were grown on Si (100) by vacuum co-evaporation using elemental Cu, Sn, S and binary ZnS as sources. XRD patterns indicated that the polycrystalline growth was suppressed and the orientational growth was relatively induced in a film grown at higher temperatures.In this presentation, the development of CZTS-based thin film solar cells will be surveyed.     

Torsion fatigue behavior of unidirectional carbon/epoxy and glass/epoxy composites

This paper presents results of the feasibility of carbon/epoxy composites (CFRP) as a future helicopter flexbeam material. Torsional behaviors of unidirectional CFRP and glass/epoxy composites (GFRP) with the same resin matrix were investigated. The initial torsional rigidity of CFRP was almost identical to that of GFRP. The torsional rigidities calculated using finite element analyses (FEA) agreed with the experimental results: the torsional rigidities are governed mainly by the material’s shear stiffness. Torsion fatigue tests were also conducted by controlling the angle of twist of the sinusoidal wave under a constant tensile axial load. No catastrophic failure occurred with either GFRP or CFRP, although decreased amplitudes of torque and torsional rigidities were observed according to the number of cycles. Results of X-ray CT inspections and numerical calculation by FEA revealed that degradation of a torsional rigidity is caused mainly by splitting crack propagation along the fiber direction. The torsion fatigue life of CFRP was superior to that of GFRP. Consequently, results confirmed that CFRP exhibits excellent properties as a torsional element of a helicopter flexbeam in terms of torsional rigidity and tension–torsion fatigue behaviors.     

Simultaneous formation of four fringes by using a polarization quadrature phase-shifting interferometer with wave plates and a diffraction grating

We present a new type of quadrature phase-shifting interferometer, which utilizes wave plates, a diffraction grating, and two lasers with different wavelengths, in order to acquire two sets of two quadrature fringe patterns in each wavelength formed on a single image sensor. This method for calculating with four phase-shifted fringe patterns gives us the phase sum and difference distributions between the phases in two wavelengths. This is also substantiated by results of our experiments.     

Clinical study of gallbladder cancer associated with acute cholecystitis

The clinical features of gallbladder carcinoma associated with acute cholecystitis and problems in diagnosing this condition by ultrasonography were investigated. Nine cases of gallbladder cancer with acute cholecystitis and 51 cases of gallbladder cancer without acute cholecystitis were reviewed. There were no obvious differences between those two groups as far as depth of invasion, location of cancer, and the prevalence of gallstones were concerned. However, there was a tendency for detection of cancer associated with acute cholecystitis by ultrasound to be more difficult than detection of cancer without acute cholecystitis. Macroscopic examination of resected specimens showed that superficial or flat type cancers tended to occur more often in cases of acute cholecystitis. This is considered to be the main cause of the difficulty in diagnosing such cancer by ultrasound.     

Effects of (S)-alpha-fluoromethylhistidine and (R)-alpha-methylhistamine on locomotion of W/Wv mice

We studied the effects of inactivators of the central histaminergic neuron system, (R)-alpha-methylhistamine, a histamine H3 receptor agonist, and (S)-alpha-fluoromethylhistidine, a histamine synthesis inhibitor, on locomotor activity and brain histamine content of mast cell-deficient W/Wv mice using a recently developed high-performance liquid chromatography system coupled with a fluorometric detector. IP injection of (R)-alpha-methylhistamine (6-50 mg/kg) increased brain histamine content after 1 h but caused no significant change in locomotor activity. IP injection of (S)-alpha-fluoromethylhistidine decreased brain histamine content at doses of 6-50 mg/kg and locomotor activity at doses of 12.5-50 mg/kg. However, locomotor activity was decreased significantly (in Student's t-test) by sequential administrations of (S)-alpha-fluoromethylhistidine (6 mg/kg) and (R)-alpha-methylhistamine (12.5 or 25 mg/kg), but not by (S)-alpha-fluoromethylhistidine (6 mg/kg) and other doses of (R)-alpha-methylhistamine (6 or 50 mg/kg). These results support the hypothesis that the central histaminergic neuron system is involved in the control of spontaneous locomotion or alertness.