Distributed Social Dilemma With Competitive Meta-players

In our research, we propose the solution to the 'Distributed Social Dilemma' as an extended social dilemma model. In this model, in order to prevent the players from becoming freeloaders, we introduce competitive meta-players. Our purpose is to evaluate, through agent-based simulation, how the meta-players effect to increase cooperation amongst players in a distributed social dilemma. In order to examine our proposed solution, we introduce the preference of the players to cooperate as the measure of the effect of the meta-players. On the basis of the result of the simulations, we show the degree of the effect of the competitive meta-players on the distribution social dilemma.     

Convergence acceleration and accuracy improvement in power bus impedance calculation with a fast algorithm using cavity modes

Based on the cavity-mode model, we have developed a fast algorithm for calculating power bus impedance in multilayer printed circuit boards. The fast algorithm is based on a closed-form expression for the impedance Z matrix of a rectangular power bus structure; this expression was obtained by reducing the original double infinite series into a single infinite series under an approximation. The convergence of the single series is further accelerated analytically. The accelerated single summation enables much faster computation, since use of only a few terms is enough to obtain good accuracy. In addition, we propose two ways to compensate for the error due to the approximation involved in the process of reducing the double series to the single series, and have demonstrated that these two techniques are almost equivalent.     

High-speed DCFL circuits with very shallow junction GaAs JFETs

High-speed DCFL (direct-coupled FET logic) circuits implemented with advanced GaAs enhancement-mode J-FETs are discussed. A divide-by-four static frequency divider operates at up to 6 GHz with a power consumption of 20 mW/flip-flop. A high channel concentration of more than 1×10¹⁸ cm^-3 together with a very shallow junction depth of less than 30 nm for the p⁺-gate results in a transconductance as high as 340 mS/mm at a gate length of 0.8 μm. Open-tube diffusion of Zn using diethylzinc and arsine makes it possible to control a very shallow p⁺-layer less than 10 nm thick. The propagation delay time, as measured with a ring oscillator, was 22 ps/gate with a power consumption of 0.42 mW/gate     

Highly unsaturated fatty acid might act as an antioxidant in emulsion system oxidized by azo compound

Now it is recognized that DHA is oxidatively stable fatty acid compared with linoleic acid (LA) in emulsified system, although DHA is oxidatively unstable in a bulk system. In fact, an emulsified mixture of DHA and LA behaves as in a bulk system, namely the oxidative stability of DHA becomes lower than that of LA. Therefore, in this study, tridocosahexaenoate (DDD) and glycerol trilinoleate (LLL) were separately emulsified using TritonX-100 as an emulsifier and DDD emulsion was mixed with the oxidizing LLL emulsion using a water-soluble radical initiator, 2,2'-azobis(2-aminopropane) dihydrochloride. As a result, DHA suppressed the oxidation of LA, while DHA was not significantly oxidized. This suppression ability was examined using glycerol trieicosapentaenoate, glycerol trilinolenate, or glycerol trioleate instead of DDD and it was found that this activity was increased with the increasing number of double bonds in the structure. Furthermore, the same type of experiment was carried out using a lipid-soluble radical initiator, 2,2'-azobisisobutyronitrile and the similar result was obtained. These results indicated that a highly polyunsaturated fatty acid might act as an antioxidant in an emulsion system oxidized by an azo compound.     

Ethanol Conversion on MCM-41 and FSM-16, and on Ni-Doped MCM-41 and FSM-16 Prepared without Hydrothermal Conditions

MCM-41 and FSM-16 were both prepared using no hydrothermal conditions, and nickel was doped into these catalysts (Ni-MCM-41 and Ni-FSM-16) using a template ion exchange method. FSM-16 and Ni-FSM-16 had greater catalytic activity for the conversion of ethanol than MCM-41 and Ni-MCM-41, indicating that FSM-16 has potential as a catalyst for the conversion of ethanol to propylene.     

Analysis of the headspace volatiles of freshly brewed arabica coffee using solid-phase microextraction

ABSTRACT:  Headspace volatiles of freshly brewed drip coffee were investigated by gas chromatography/mass spectrometry (GC/MS) and gas chromatography/olfactometry (GC/O, CharmAnalysis™) analyses. For this purpose, a solid-phase microextraction (SPME) sampling method for the headspace volatiles of freshly brewed drip coffee was developed. SPME fiber coated with divinylbenzene (DVB)/carboxen/polydimethylsiloxane (PDMS) was selected from 6 types, and sampling time was determined at 2 min. The headspace coffee volatiles stayed constant in proportion for the first 2 min to keep the freshness of the brewed coffee aroma. Using this sampling method, the headspace volatiles of freshly brewed drip coffee (Ethiopian arabica coffee, roast degree: L value; 23) were examined by GC/MS and GC/O analyses. From the GC/O results, 1-(3,4-dihydro-2 H -pyrrol-2-yl)-ethanone (nutty-roast odor) and 4-(4'-hydroxyphenyl)-2-butanone (raspberry ketone, sweet-fruity odor) were newly detected as components in the aroma of coffee.     

The relationship between acoustic emission signals and cutting phenomena in turning process

The development of intelligent manufacturing by using machine tools is advancing in leaps and bounds. To maintain accuracy in machining and in the interests of fail-safe operation, monitoring of the cutting state or the final machining is very important. Acoustic emissions (AE) comprise elastic stress waves produced as a result of the deformation and fracture of materials. By measuring the AE generated during a turning process, it is possible to estimate the state of the machining operation. The correlation between cutting phenomena and AE in a turning process was examined experimentally by using a steel workpiece and a cermet tool in a numerically controlled turning process. The process of formation of chips, the types of chip, and the shear angle all markedly affected the AE signals. There was a strong negative correlation between the shear angle and the AE signal level. Similar results were obtained for various feed rates and for workpieces of various degrees of hardness. Correlations related to surface roughness and to tool wear are also described that permit the evaluation of the state of the turning process.     

A metalloproteinase inhibitor prevents lethal acute graft-versus-host disease in mice

Tumor necrosis factor (TNF) and Fas ligand (FasL) have been implicated in the pathogenesis of graft-versus-host disease (GVHD), which is a major complication after allogeneic bone marrow transplantation. We examined here the ameliorating effect of a metalloproteinase inhibitor (KB-R7785) that inhibits TNF-alpha and FasL release in a lethal acute GVHD model in mice. Administration of KB-R7785 into (BALB/c x C57BL/6) F1 that received C57BL/6 spleen cells markedly reduced the mortality and weight loss in association with minimal signs of GVHD pathology in the liver, intestine, and hematopoietic tissues. The ameliorating effect of KB-R7785 was superior to that of anti-TNF-alpha antibody. Our results suggest that KB-R7785 could be a potent therapeutic agent for GVHD.     

Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Relationship between gait and clinical results after high tibial osteotomy

Thirty-two patients with primary osteoarthritis of the medial compartment of the knee were studied prospectively to assess the relationship between clinical results, limb alignment, and adduction moment of the knee. Clinical and radiographic examination and gait analyses were performed preoperatively and repeated at 6 months and at 1, 3, and 6 years after high tibial osteotomy. The preoperative peak adduction moment was high in 25 patients and low in seven. In both groups, the adduction moment of the knee decreased at 6 months after surgery but increased after that period. Alignment of the affected knee in both groups remained valgus after surgery (average femorotibial angle, 167 degrees-169 degrees). Clinical outcome in both groups improved after surgery and remained unchanged after 1 year. The peak adduction moment of the knee for the whole group significantly correlated with alignment and foot angle before and 6 years after surgery but did not correlate with stride length and walking velocity. In addition, only alignment was associated significantly with clinical results at 6 years. These results suggest that the preoperative peak adduction moment of the knee does not correlate with clinical or radiographic outcomes of high tibial osteotomy, provided sufficient valgus alignment is achieved at surgery.