Burning Characteristics of Ammonium Nitrate‐based Composite Propellants Supplemented with MnO2

Ammonium nitrate (AN)‐based composite propellants have several major problems, namely, a low burning rate, poor ignitability, low energy, and high hygroscopicity. The addition of a burning catalyst proved to be effective in improving the burning characteristics of AN‐based propellants. In this study, the burning characteristics of AN‐based propellants supplemented with MnO₂ as a burning catalyst were investigated. The addition of MnO₂ is known to improve the ignitability at low pressure. The most effective amount of MnO₂ added (ξ) for increasing the burning rate is found to be 4 %. The increasing ratio with ξ is virtually independent of the burning pressure and the AN content. However, the pressure exponent unfortunately increased by addition of MnO₂. The apparent activation energy of the thermal decomposition for AN and the propellant is decreased by addition of MnO₂. From thermal decomposition kinetics it was found that MnO₂ could accelerate the thermal decomposition reaction of AN in the condensed phase, and therefore, the burning characteristics of the AN‐based propellant are improved.     

Density Functional Theory of the Interface between Solid and Superfluid Helium 4

No Heading We report a calculation of the equilibrium profile of the interface between superfluid helium 4 and its solid phase at 0 K. To calculate the excess energy of the interface, we use the density functional theory that allowed us to obtain the equilibrium density of both phases. We compare our result to the experimental and to a previous microscopic calculation.PACS numbers: 68.08.–p, 67.80.–s, 67.40.Kh.     

Microbiota during fermentation of chum salmon (Oncorhynchus keta) sauce mash inoculated with halotolerant microbial starters: Analyses using the plate count method and PCR-denaturing gradient gel electrophoresis (DGGE)

Nine different combinations of mugi koji (barley steamed and molded with Aspergillus oryzae) and halotolerant microorganisms (HTMs), Zygosaccharomyces rouxii, Candida versatilis, and Tetragenococcus halophilus, were inoculated into chum salmon sauce mash under a non-aseptic condition used in industrial fish sauce production and fermented at 35 ± 2.5 °C for 84 days to elucidate the microbial dynamics (i.e., microbial count and microbiota) during fermentation. The viable count of halotolerant yeast (HTY) in fermented chum salmon sauce (FCSS) mash showed various time courses dependent on the combination of the starter microorganisms. Halotolerant lactic acid bacteria (HTL) were detected morphologically and physiologically only from FCSS mash inoculated with T. halophilus alone or with T. halophilus and C. versatilis during the first 28 days of fermentation. Only four fungal species, Z. rouxii, C. versatilis, Pichia guilliermondii, and A. oryzae, were detected throughout the fermentation by PCR-denaturing gradient gel electrophoresis (PCR-DGGE). In FCSS mash, dominant HTMs, especially eumycetes, were nonexistent. However, under the non-aseptic conditions, undesirable wild yeast such as P. guilliermondii grew fortuitously. Therefore, HTY inoculation into FCSS mash at the beginning of fermentation is effective in preventing the growth of wild yeast and the resultant unfavorable flavor.     

Cyclic Vector Multiplication Algorithm Based on a Special Class of Gauss Period Normal Basis

This paper proposes a multiplication algorithm for , which can be efficiently applied to many pairs of characteristic p and extension degree m except for the case that 8p divides m(p–1). It uses a special class of type‐?k, m? Gauss period normal bases. This algorithm has several advantages: it is easily parallelized; Frobenius mapping is easily carried out since its basis is a normal basis; its calculation cost is clearly given; and it is sufficiently practical and useful when parameters k and m are small.     

A comparative study of fracture behavior between carbon black/poly(ethylene terephthalate) and multiwalled carbon nanotube/poly(ethylene terephthalate) composite films

Fracture behavior of amorphous poly(ethylene terephthalate) (PET) films added multiwalled carbon nanotube (MWCNT) has been compared with that of the PET films added with carbon black (CB) to elucidate the effects of the large aspect ratio of MWCNT. Fracture toughness has been evaluated using the essential work of fracture tests. Evolution of the crazes has been analyzed by conducting time‐resolved small‐angle X‐ray scattering measurements during tensile deformation of the films at room temperature using synchrotron radiation. CB and MWCNT increased the fracture toughness of the PET film by increasing the plastic work of fracture. This resulted from the effects of the fillers to prevent the localization of deformation upon the crazes formed at earlier stages of tensile deformation and to retard the growth of the fibrils in the crazes to a critical length. The CB particles provided a number of sites where the crazes were preferably formed due to stress concentration. In the case of MWCNT, on the other hand, the widening of the crazes formed at earlier stages was suppressed due to the bridging effect arising from the large aspect ratio of MWCNT. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Magnetic and magnetoelectric properties of self-assembled Fe₂.₅Mn₀.₅O₄ nanocrystals

We report magnetoresistance of -40%, corresponding to 80% spin polarization, at magnetic field of 0.5 T and 200 K for oleic acid-coated Fe(2.5)Mn(0.5)O(4) nanocrystals (FMO NCs) self-assembled on a SiO(2)/Si substrate by drop casting fabrication. The FMO NCs exhibited spin glass transition around 150 K and nonlinear current-voltage (I-V) characteristics. Fowler-Nordheim plot of the I-V characteristics indicated that electrons tunnel directly barriers between the FMO NCs. Transmission electron microscopy revealed that the FMO NCs are elongated hexagon in shape with size of ～15 × 20 nm. The FMO NCs self-assembled in two-dimension hexagonal networks of collinear ferromagnetic moments. The [111] easy magnetization axis of each FMO NC was parallel to each other in the hexagonal arrays. Geometrically frustrated lattice of collinear ferromagnetic moments supports both a low and a high intergranular tunneling conductance for the self-assembled FMO NCs without and with magnetic fields, respectively.     

Atomic force microscopy based tunable local anodic oxidation of graphene

We have fabricated graphene/graphene oxide/graphene (G/GO/G) junctions by local anodic oxidation lithography using atomic force microscopy (AFM). The conductance of the G/GO/G junction decreased with the bias voltage applied to the AFM cantilever V(tip). For G/GO/G junctions fabricated with large and small |V(tip)|. GO was semi-insulating and semiconducting, respectively. AFM-based LAO lithography can be used to locally oxidize graphene with various oxidation levels and achieve tunability from semiconducting to semi-insulating GO.     

Assessment of Construction Joint Effect in Full-Scale Concrete Beams by Acoustic Emission Activity

In the present paper the mechanical and acoustic emission (AE) behaviors of full-scale reinforced concrete beams are evaluated. One of the beams was constructed in two parts, which were assembled later in order to evaluate the effect of the joints in the structural behavior. The load was applied by means of a four-point-bending configuration. It is revealed that at initial stages of loading, the conventional measurements of strain and deflection, as well as pulse velocity, do not show any discrepancy, although the structural performance of the two beams is eventually proven to be quite different. On the contrary, AE parameters, even from early load steps, indicate that the damage accumulation is much faster in the assembled beam. This is confirmed by the calculated sources of AE events which are close to the construction joints. The results show that the AE technique is suitable to monitor the deterioration process of full-scale structures and yields valuable information that cannot be obtained at the early stages of damage by any other way.