Reverse direction-based surrounder queries for mobile recommendations

This paper proposes a new spatial query called a reverse direction-based surrounder (RDBS) query, which retrieves a user who is seeing a point of interest (POI) as one of their direction-based surrounders (DBSs). According to a user, one POI can be dominated by a second POI if the POIs are directionally close and the first POI is farther from the user than the second is. Two POIs are directionally close if their included angle with respect to the user is smaller than an angular threshold ??. If a POI cannot be dominated by another POI, it is a DBS of the user. We also propose an extended query called competitor RDBS query. POIs that share the same RDBSs with another POI are defined as competitors of that POI. We design algorithms to answer the RDBS queries and competitor queries. The experimental results show that the proposed algorithms can answer the queries efficiently.     

Japanese/English Cross-Language Information Retrieval: Exploration of Query Translation and Transliteration

Cross-language information retrieval (CLIR), where queriesand documents are in different languages, has of late become one ofthe major topics within the information retrieval community. Thispaper proposes a Japanese/English CLIR system, where we combine aquery translation and retrieval modules. We currently target theretrieval of technical documents, and therefore the performance of oursystem is highly dependent on the quality of the translation oftechnical terms. However, the technical term translation is stillproblematic in that technical terms are often compound words, and thusnew terms are progressively created by combining existing basewords. In addition, Japanese often represents loanwords based on itsspecial phonogram. Consequently, existing dictionaries find itdifficult to achieve sufficient coverage. To counter the firstproblem, we produce a Japanese/English dictionary for base words, andtranslate compound words on a word-by-word basis. We also use aprobabilistic method to resolve translation ambiguity. For the secondproblem, we use a transliteration method, which corresponds wordsunlisted in the base word dictionary to their phonetic equivalents inthe target language. We evaluate our system using a test collectionfor CLIR, and show that both the compound word translation andtransliteration methods improve the system performance.     

The influence of carboxylate ions on the growth of β-FeOOH particles

Colloidal -FeOOH particles were produced by hydrolysis of FeCl₃ solutions doped with varied amounts of formate, lactate, oxalate, tartarate, pyromellitate and EDTA ions at 100 °C. The resulting particles were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric-differential thermal analysis, Fourier transform-infrared spectroscopy, elemental analysis, and the adsorption of nitrogen and water. With increasing concentration of added carboxylate ions, the mean modal size of the particles formed increased at low concentrations and decreased after passing the maximum. The crystallite sizes also revealed a maximum on adding EDTA, oxalate and lactate ions, while they monotonically decreased with the addition of other ions. Doping with tartarate and pyromellitate ions by more than 7 and 10 mol%, respectively, produced amorphous particles containing a large amount of these ions. The particles formed with 20 mol% tartarate ions adsorbed water selectively.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Ion-velocity dependence of high-density electronic excitation effects in oxide superconductors

Thin films of EuBa₂Cu₃O_y oxide superconductor have been irradiated with high energy heavy ions (80 MeV I, 125 MeV Br, 1.1 GeV Mo and 3.5 GeV Xe) having same electronic stopping power, S_e, in order to investigate the ion-velocity dependence of the electronic excitation effects under the constant electronic energy deposition. Although S_e is constant, a strong reduction in the irradiation effect on lattice parameter with increasing ion-velocity is observed in the low ion-velocity region around E  1 MeV/nucleon, while the ion-velocity dependence is hardly observed in the high ion-velocity region of E > 10 MeV/nucleon. If the observed velocity-dependence is assumed to be due to the change in the fraction of S_e contributing to defect creation, the fraction in the low velocity region (E  0.6 MeV/nucleon) is estimated to be about two times larger than that in the high velocity region (E > 10 MeV/nucleon).     

Hydraulic Study of the Onset of Hypoxia in the Tone River Estuary

Field measurements were conducted to investigate the onset and growth of hypoxia in the Tone River Estuary. Vertical profiles of dissolved oxygen (DO), salinity, and temperature were measured along the deepest line of the estuary. Rates of oxygen consumption by water and sediment in a salt wedge were obtained using laboratory tests. The measurements showed that hypoxia frequently occurred in the front part of the salt wedge and expanded its area toward the river mouth during the summer when the river flow rate was small. The data also suggested that the onset of hypoxia was delayed by the estuarine circulation which supplied oxygen-rich seawater to the salt wedge. To simulate this phenomenon, a two-dimensional flow model in the vertical-longitudinal plane was constructed by transversely integrating the k–ε model equations. The results of model simulation for three months in the summer of 1997 closely matched the field data. The model simulation proved that DO degradation is highly correlated with the residence time of salt water in the estuary.     

ST-segment elevation in right precordial leads implies depressed right ventricular function after acute inferior myocardial infarction

BACKGROUND: The prognosis of acute inferior myocardial infarction is worse when it is complicated by right ventricular infarction. ST elevation in the right precordial leads is one of the reliable methods for detecting acute right ventricular infarction. The purpose of the study was to examine the relation between ST elevation in the right precordial electrocardiographic leads during acute inferior infarction and the severity of right ventricular systolic dysfunction. METHODS: This study analyzed the relation between ST elevation > or = 0.1 mV in V4R and the severity of right ventricular systolic dysfunction in 43 consecutive patients (men/women: 35/8; average age 62+/-9 years) with acute inferior myocardial infarction with a rapid-response Swan-Ganz catheter to measure the right ventricular ejection fraction (RVEF). RESULTS: RVEF was significantly lower in patients with ST elevation (n = 18) than in those without (n = 25) (33%+/-6% vs 40%+/-9%, p = 0.010). If the infarct-related lesion was located in the proximal right coronary artery, RVEF tended to be lower than if the lesion was located in the distal right coronary artery or the left circumflex coronary artery (33%+/-10% vs 37%+/-9% vs 42%+/-9%, p = 0.101). Logistic regression analysis demonstrated that ST elevation in V4R was the only independent predictor of depressed RVEF (odds ratio = 5.31, 95% confidence interval = 1.28 to 22.1, p = 0.022). CONCLUSION: ST elevation in lead V4R during acute inferior myocardial infarction predicts right ventricular systolic dysfunction.     

Second harmonic generation of pseudo mode-locked multi ten milliwatt picosecond Ti:sapphire laser

We report the single-pass second harmonic generation (SHG) of the picosecond Ti:sapphire laser with a periodically poled lithium niobate (PPLN) waveguide. We demonstrate a conversion efficiency of 37% for the 9-mW fundamental input power at 820 nm. This laser source can provide three types of pulsed modes such as picosecond, nanosecond, and contiuous wave, by adjusting the power of the pumping source. We compare the conversion efficiency in each mode, and clearly show that SHG efficiency depends on the pulsewidth, that is, the peak power of the laser source. As the temperature of the PPLN rises, the fundamental wavelength for phase-matching becomes longer. We indicate that the rate is about 0.06 nm/K.     

Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation

This study describes a new method of experimental design to obtain a response surface of buckling load of laminated composites. Many evaluations for genetic algorithms for stacking sequence optimizations require high computational cost. That evaluation cost can be reduced by an approximation using a response surface. For a response surface for stacking sequence optimizations, lamination parameters are adopted as variables of the approximation function of the entire design space instead of ply angles for each ply. This study presents, proposes and investigates a new method of experimental design in detail. For most analytical tools, stacking sequences is demand as input data and lamination parameters cannot be applied directly to the tools. Therefore, the present study proposes and applies a new D-optimal set of laminates to the stacking sequence optimizations of the problem of maximization of buckling load of a composite cylinder. The new experimental design is a set of stacking sequences selected from candidate stacks using D-optimality. Consequently, the D-optimal set of laminates is shown to be effective for design of experiments of response surfaces for maximization of the buckling load of composite structures.     

An object-oriented database system Jasmine: implementation,application, and extension

We have devised an object oriented DBMS called Jasmine for advanced applications. The paper describes the implementation, application and extension of Jasmine in detail. We focus on the impact of the design of its object oriented model and language on database implementation technology. We describe what part of traditional relational database technology we extend to handle object oriented features such as object identifiers, complex objects, class hierarchies, and methods. We introduce nested relations to efficiently store and access clustered complex objects. We use hash based methods to efficiently access nonclustered complex objects. We provide user defined functions directly evaluated on page buffers to efficiently process method invocation. We devise object oriented optimization of queries including class hierarchies, complex objects, and method invocation. We incorporate dedicated object buffering to allow efficient access to objects through object identifiers. We also describe nontrivial applications of Jasmine and discuss the validity of object oriented databases. We focus on a constraint management facility, which can be implemented by taking advantage of the extensibility of Jasmine. The facility includes constraint rules, called design goals, for automatic database population required by engineering applications. Finally, we describe a view facility for schema integration also needed by engineering applications in distributed environments. We focus on how we extend Jasmine to implement the facility