Capability of Utilizing CYP3A5 Polymorphisms to Predict Therapeutic Dosage of Tacrolimus at Early Stage Post-Renal Transplantation

While CYP3A5 polymorphisms are used to predict the initial dosage of tacrolimus therapy, the predictive capability of genetic information for dosing at early stage post-renal transplantation is unknown. We investigated the influence of polymorphisms over time. An initial oral dose of modified-release once-daily tacrolimus formulation (0.20 mg/kg) was administered to 50 Japanese renal transplant patients every 24 h. Stepwise multiple linear regression analysis for tacrolimus dosing was performed each week to determine the effect of patient clinical characteristics. The dose-adjusted trough concentration was approximately 70% higher for patients with the CYP3A5*3/*3 than patients with the CYP3A5*1 allele before the second pre-transplantation tacrolimus dose (0.97 (0.78–1.17) vs. 0.59 (0.45–0.87) ng/mL/mg; p < 0.001). The contribution of genetic factors (CYP3A5*1 or *3) for tacrolimus dosing showed increased variation from Day 14 to Day 28 after transplantation: 7.2%, 18.4% and 19.5% on Days 14, 21 and 28, respectively. The influence of CYP3A5 polymorphisms on the tacrolimus maintenance dosage became evident after Day 14 post-transplantation, although the tacrolimus dosage was determined based only on patient body weight for the first three days after surgery. Tacrolimus dosage starting with the initial administration should be individualized using the CYP3A5 genotype information.     

Molecular mechanisms of epigenetic variation in plants

Natural variation is defined as the phenotypic variation caused by spontaneous mutations. In general, mutations are associated with changes of nucleotide sequence, and many mutations in genes that can cause changes in plant development have been identified. Epigenetic change, which does not involve alteration to the nucleotide sequence, can also cause changes in gene activity by changing the structure of chromatin through DNA methylation or histone modifications. Now there is evidence based on induced or spontaneous mutants that epigenetic changes can cause altering plant phenotypes. Epigenetic changes have occurred frequently in plants, and some are heritable or metastable causing variation in epigenetic status within or between species. Therefore, heritable epigenetic variation as well as genetic variation has the potential to drive natural variation.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Oral Secretions Affect HIPVs Induced by Generalist (<Emphasis Type="Italic">Mythimna loreyi</Emphasis>) and Specialist (<Emphasis Type="Italic">Parnara guttata</Emphasis>) Herbivores in Rice

Plants synthesize variable mixtures of herbivore-induced plant volatiles (HIPVs) as part of their evolutionary conserved defense. To elucidate the impact of chewing herbivores with different level of adaptation on HIPV profiles in rice, we measured HIPVs released from rice seedlings challenged by either the generalist herbivore Mythimna loreyi (MYL) or the specialist Parnara guttata (PAG). Both herbivores markedly elicited the emission of HIPVs, mainly on the second and third days after attack compared to control plants. In addition, side-by-side HIPV comparisons using MYL and PAG caterpillars revealed that generalist feeding induced comparably more HIPVs relative to specialist, particularly on day two as highlighted by multivariate analysis (PLS-DA) of emitted HIPVs, and further confirmed in mimicked herbivory experiments. Here, mechanically wounded plants treated with water (WW) released more VOCs than untreated controls, and on top of this, oral secretions (OS) from both herbivores showed differential effects on volatile emissions from the wounded plants. Similar to actual herbivory, MYL OS promoted higher amounts of HIPVs relative to PAG OS, thus supporting disparate induction of rice indirect defenses in response to generalist and specialist herbivores, which could be due to the differential composition of their OS. (196 words).     

Novel SiC synthesis method applicable to SiC solid phase sintering

Most of the present production processes of SiC sintered bodies require some powder mixing using a mechanical milling process (ball milling, and so on). In this case, relatively long hours are required, and there is the problem of contamination during the preparation process. To avoid these problems, we developed a new process for obtaining a self-sinterable, stoichiometric SiC powder, whose precursor material is water-soluble; the precursor material was synthesized from aqueous silica and citric acid containing a small amount of aluminum compound. In order to obtain the stoichiometric SiC composition, the above aqueous precursor material was adequately cured in air (200°C-400°C); subsequently carbonization reaction (~800°C) in nitrogen atmosphere, carbothermal reduction (~1600°C) in argon atmosphere, and pressureless sintering (~1900°C) were performed. Among these processes, the curing process (cross-linking process) is very important for obtaining the equivalent composition (silica and carbon) for the subsequent carbothermal reduction. In this study, the adequate curing temperature and suitable preparation condition for the carbothermal reduction were investigated for the production of stoichiometric self-sinterable SiC powder. The pressureless sintered body achieved using the obtained SiC powder demonstrated a desirable trans-crystalline fracture behavior.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Role of zinc compounds on the formation, morphology, and adsorption characteristics of β-FeOOH rusts

To simulate the corrosion of galvanized steel in marine zone, β-FeOOH was prepared by aging the FeCl₃ solutions containing ZnCl₂ and zinc rusts such as ZnO and zinc hydroxychloride (Zn₅(OH)₈Cl₂·H₂O:ZHC). Adding ZnCl₂, ZnO, and ZHC inhibited the crystallization and particle growth of β-FeOOH and the inhibitory effect was in order of ZHC ≈ ZnO > ZnCl₂. The adsorption of H₂O and CO₂ was suppressed by adding ZnCl₂, ZnO, and ZHC. These results imply that the rust formed on galvanized steel in marine environment is more compact, amorphous, and hydrophobic in nature which may lead to improve the corrosion resistance.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.