Oxygen Potential Analysis to Evaluate Irradiation Behavior in MOX and MA-Bearing MOX Fuels

Oxygen potentials of oxide nuclear fuels are important thermodynamic data in development of nuclear fuel technologies. Minor actinide bearing MOX （mixed oxide） fuels have been developed as sodium cooled fast reactor fuels. Content of Am which is one of the minor actinide elements causes oxygen potentialto increase. The effects of the oxygen potential increase on the irradiation behavior were evaluated. Profiles of temperature and O/M （oxygen-to-metal） ratio in the pellets were evaluated to better understand the irradiation behavior. From these data, local oxygen potential in the radial direction of the pellets was calculated, and was compared with free energy of compounds composed of fission products. Based on this comparison, it was concluded that Cs2MoO4 was likely formed at pellet periphery of （U07Pu03）O1.98 and （U0.66Pu03Amoo16Npo.016）Ol.976 The extent of cladding tube inner surface oxidation was predicted by using the calculated oxygen potential. No significant difference between irradiation behaviors of （Uo.7Puo3）O2_x and （U0.66PUo 3Amo.016Npo.016）O2.x pellets was confirmed.     

Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

Inclusions contributing to acicular ferrite nucleation were investigated from a crystallographic point of view in low carbon low alloy steelweld metals. The samples from electro slag welding (ESW) and submerged arc welding (SAW) deposits with various cooling rates were prepared in this study. In those samples, intragranular acicular ferrite formation was observed from inclusions. The inclusions contributing to acicular ferrite formation were of multi-phase type consisting of amorphous phase, spinel type and MnS. They were surrounded by a Ti-enriched layer. It was confirmed by selected area diffraction patterns and energy-dispersive X-ray spectrometer analyses that the Ti-enriched layer was TiO. The acicular ferrite had a Baker–Nutting orientation relationship with the TiO layer on the inclusion surface. The misfit was 3.0% at the interface between the acicular ferrite and TiO. Therefore, it is considered that TiO on the inclusion surface contributes to the heterogeneous nucleation of acicular ferrite by small lattice misfit. However, themorphologies of ferrite growth which nucleated from inclusions were different in both samples. Whereas the growth of ferrites nucleated from TiO was enough in ESW, the size of nucleated ferrite in SAW was a few hundred millimetres in size. In the early stage of nucleation from TiO, ferrite had small deviation from Kurdjumov–Sachs orientation relationship (K–S relationship) in both ESW and SAW. However, there was a difference in the growth stage of ferrite. The ferrite orientations were gradually changed to fit to the K–S relationship in ESW. On the other hand, the nucleated ferrite in SAW stopped growing and the newly nucleated ferrite which had K–S relationship prior to austenite was formed adjacently because of large super cooling due to small heat input.     

Automatic heart-rate-based selection of pedal load and control system for electric cart

This paper describes an autoselection method for the pedal load of an electric cart, and the control system. The method checks the driver’s physical condition just before the start of driving, calculates the driver’s rating of perceived exertion, and uses that to automatically select a suitable pedal load. To ensure that the level of physical exertion is safe, the largest pedal load is determined on the basis of Borg’s CR10, the Karvonen formula, a pedaling experiment, and statistical data. A driver’s degree of fatigue is estimated from his heart rate, and a pedal load (between the largest and almost zero) is automatically selected. In addition, a dynamic output-feedback cart control system was designed that guarantees the stability of the cart system for any allowable pedal load. A stability condition is derived by employing the concept of dynamic parallel distributed compensation. Finally, experiments demonstrate the validity of the method.     

Effective synthesis of ethanol from CO2 on polyfunctional composite catalysts

Synthesis of ethanol by hydrogenation of carbon dioxide has been investigated by developing the novel composite catalysts. The three different kinds of elementary reaction functions for ethanol synthesis were undertaken. The catalytic functions are partial reduction of CO₂ to CO, C–C bond formation, and –OH group insertion. For this purpose, supported Rh catalyst, Fe-based modified Fisher–Tropsch catalyst, and Cu-based modified methanol synthesis catalyst were combined by different ways. As a result, high space–time yields of ethanol as high as 0.8–0.9 kg/l h were obtained.     

Synthesis of an AlN Polycrystalline Bulk Layer and Nanotubes by Using NH3 and Bi

A bulk layer of aluminum nitride (AlN) polycrystals was synthesized on a boron nitride crucible surface by heating Al chunks with 5 mol% of bismuth at 1273 K for 3 h under NH₃ gas flow. The fragments of the layer were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The platelet grains of AlN with a size of 0.1–1.0 μm and having preferred orientation of the c -axis perpendicular to the layer were formed at the crucible side. Nanotubes 6–15 μm long and about 20–100 nm thick grew on the gas phase side of the layer.     

Power variation control of a wind generator by using feed forward control

The pitch control of wind generators is usually made by a feed back control concept. However, under the conditions where a wind speed changes very frequently due to geographic reasons of the site and the target system has large rotor inertia, the feed back signal which is applied to the control system to compensate disturbance such as wind speed variations is delayed, and consequently the control strategy to keep the generated power at a constant value does not work well. If the wind speed shows too much variation, this will cause a violent variation of power and result in step out operation of the generator from the power system due to magnetic saturation. This paper proposes a control strategy to reduce the power variations by introducing feed forward control combining with the conventional feed back control.     

Characteristics of N2/SF6 mixture gas in creeping discharge developing in narrow gap with backside electrode

The flashover voltage with a backside electrode was found to be lower than that without the backside electrode. Under microsecond pulse voltage application, we describe the characteristics of a creeping discharge developed in the narrow gap with the backside electrode. Using a CCD camera and ultrahigh‐speed camera, we observed the corona extension processes. The lowest flashover voltage was found to be obtained at positive polarity with a SF₆ content D = 3%. In the corona extension obtained using an ultrahigh‐speed camera, peculiar differences were observed in the corona extension process. The corona extension increased, and rapid flashover was observed at D = 3%. Using a CCD camera, small coronas were detected from the backside electrode. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 158(2): 31–38, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20431     

Combined study with FDG PET and Tl SPECT in patients with idiopathic dilated cardiomyopathy

This study aimed to determine whether combined examinations of myocardial 2-[18F]fluoro-2-deoxy-D-glucose positron emission tomography (FDG PET) and stress-redistribution 201Tl single-photon emission computed tomography (Tl SPECT) were useful in clarifying myocardial ischaemia and evaluating the prognosis in patients with idiopathic dilated cardiomyopathy (IDCM). Twenty-two patients with IDCM underwent echocardiography, cardiac catheterization, FDG PET, and Tl SPECT. In scintigraphic analysis, the total defect score (TDS) was semiquantitatively determined as the sum of scores of the 17 left ventricular (LV) segments with a 5-point scale (0 as normal to 4 as absent). Patients were classified according to the scintigraphic findings as follows: eight patients with small defects on Tl and FDG (TDS < or = 20) (group I), eight patients with small defects on FDG (TDS < or = 20) with FDG uptake increased relative to Tl or 'mismatch' (group II), and six patients with large defects on FDG and Tl (TDS >20) (group III). Eleven patients (50%) showed reversible defects on Tl and all showed preserved FDG uptake. The patients in group III had significantly lower LV ejection fraction (LVEF) (P<0.05, respectively) and a poorer prognosis as shown by the Kaplan-Meier event-free curve compared with those in groups I and II (P<0.01, respectively). Although patients in group II had significantly greater TDS on Tl compared with those in group I (P<0.01), no significant differences in LVEF and prognosis were found between patients in groups I and II. In multivariate analysis, a TDS on FDG revealed an independent predictor of subsequent cardiac events. In conclusion, such mismatched areas can be assumed to consist of impaired but viable myocardium, and may be associated with ischaemia of the microvasculature. Impaired myocardial glucose metabolism is a more powerful predictor of future cardiac events than perfusion abnormality in patients with IDCM.