Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.     

Experimental study on relationship between heat parameter and angular distortion

It is well known that weld residual stress and distortion should be controlled appropriately for structural integrity. Recently, it has become much more necessary to control weld distortion to highly improve manufacturing efficiency. Various studies on control of weld distortion had been conducted based on clarification of influential dominant factors for that. The influential dominant factors had been studied from a viewpoint of temperature distribution in plate thickness section. Without considering moving the weld heat source, the temperature distribution is controlled by weld heat input (Q_net) per weld length. Angular distortion, which is controlled by temperature distribution along the direction of plate thickness (h), is controlled by heat input parameter (Q_net/h²). However, it has recently become known that the conventional results cannot be applied to all welding processes because such processes are becoming more diversified. It is significant for more accurate control of angular distortion to investigate once again the relationship between the heat input parameter and angular distortion. In this study, a series of experiments on the relationship between heat input parameter and angular distortion are carried out. The effects of welding current and welding speed are investigated individually in both TIG and MAG welding. The difference between these welding methods is also investigated. Based on the result, the effects of them are discussed in relation to temperature distribution during welding. It is considered that angular distortion is affected by temperature distribution not only in plate thickness section but also along welding direction. So, angular distortion is not always controlled by only the conventional heat input parameter because the heat input parameter is proposed as the influential dominant factor for temperature distribution in plate thickness section. It is concluded that generation characteristics of inherent strain should be considered in relation to three-dimensional temperature distributions during welding for more accurate control of angular distortion.     

CRISPR Therapeutics for Duchenne Muscular Dystrophy

Duchenne muscular dystrophy (DMD) is an X-linked recessive neuromuscular disorder with a prevalence of approximately 1 in 3500–5000 males. DMD manifests as childhood-onset muscle degeneration, followed by loss of ambulation, cardiomyopathy, and death in early adulthood due to a lack of functional dystrophin protein. Out-of-frame mutations in the dystrophin gene are the most common underlying cause of DMD. Gene editing via the clustered regularly interspaced short palindromic repeats (CRISPR) system is a promising therapeutic for DMD, as it can permanently correct DMD mutations and thus restore the reading frame, allowing for the production of functional dystrophin. The specific mechanism of gene editing can vary based on a variety of factors such as the number of cuts generated by CRISPR, the presence of an exogenous DNA template, or the current cell cycle stage. CRISPR-mediated gene editing for DMD has been tested both in vitro and in vivo, with many of these studies discussed herein. Additionally, novel modifications to the CRISPR system such as base or prime editors allow for more precise gene editing. Despite recent advances, limitations remain including delivery efficiency, off-target mutagenesis, and long-term maintenance of dystrophin. Further studies focusing on safety and accuracy of the CRISPR system are necessary prior to clinical translation.     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

The Effect of Sodium-Dependent Glucose Cotransporter 2 Inhibitor Tofogliflozin on Neurovascular Coupling in the Retina in Type 2 Diabetic Mice

We investigated the effect of tofogliflozin, a sodium-dependent glucose cotransporter 2 inhibitor (SGLT2i), on retinal blood flow dysregulation, neural retinal dysfunction, and the impaired neurovascular coupling in type 2 diabetic mice. Tofogliflozin was added to mouse chow to deliver 5 mg/kg/day and 6-week-old mice were fed for 8 weeks. The longitudinal changes in the retinal neuronal function and blood flow responses to systemic hyperoxia and flicker stimulation were evaluated every 2 weeks in diabetic db/db mice that received tofogliflozin (n =6) or placebo (n = 6) from 8 to 14 weeks of age. We also evaluated glial activation and vascular endothelial growth factor (VEGF) expression by immunofluorescence. Tofogliflozin treatment caused a sustained decrease in blood glucose in db/db mice from 8 weeks of the treatment. In tofogliflozin-treated db/db mice, both responses improved from 8 to 14 weeks of age, compared with vehicle-treated diabetic mice. Subsequently, the electroretinography implicit time for the oscillatory potential was significantly improved in SGLT2i-treated db/db mice. The systemic tofogliflozin treatment prevented the activation of glial fibrillary acidic protein and VEGF protein expression, as detected by immunofluorescence. Our results suggest that glycemic control with tofogliflozin significantly improved the impaired retinal neurovascular coupling in type 2 diabetic mice with the inhibition of retinal glial activation.     

Yoghurt fermented by Lactobacillus delbrueckii subsp. bulgaricus H+ -ATPase-defective mutants exhibits enhanced viability of Bifidobacterium breve during storage

Persistent acid production by Lactobacillus delbrueckii subsp. bulgaricus during refrigerated storage is a major cause of reduced viability of probiotic strains such as Bifidobacterium breve in yoghurt. It was established that H+ -ATPase-defective mutants of lactic acid bacteria have reduced growth and metabolism in low pH environments. Therefore, the aim of this study was to evaluate inhibition of post-acidification and maintenance of B. breve viability in yoghurt fermented by L. delbrueckii subsp. bulgaricus mutants with reduced membrane-bound H+ -ATPase activity during refrigerated storage. Spontaneous neomycin mutants of L. delbrueckii subsp. bulgaricus that had a significantly (P < or = 0.05) reduced H+ -ATPase activity were successfully isolated. Yoghurt fermented using L. delbrueckii subsp. bulgaricus SBT0164 No. 55-1 (mutant) starter culture had markedly reduced post-acidification and maintained viability (> or = 10(8) CFU/ml) of both Bifidobacteruim breve JCM 1192(T) and Bifidobacteruim breve JCM 7017 during storage at 10 degrees C for 21 days. These results clearly showed that yoghurt fermented by mutants of L. delbrueckii subsp. bulgaricus with reduced membrane-bound H+ -ATPase activity has reduced post-acidification that prolongs viability of B. breve in yoghurt during refrigerated storage.     

Effects of difructose anhydride III (DFA III) administration on rat intestinal microbiota

The effects of difructose anhydride III (di-D-fructofuranose-1,2':2,3'-dianhydride; DFA III) administration (3% DFA III for 4 weeks) on rat intestinal microbiota were examined using denaturing gradient gel electrophoresis (DGGE). According to DGGE profiles, the number of bacteria related to Bacteroides acidofaciens and uncultured bacteria within the Clostridium lituseburense group decreased, while that of bacteria related to Bacteroides vulgatus, Bacteroides uniformis and Ruminococcus productus increased in DFA III-fed rat cecum. In the cecal contents of DFA III-fed rats, a lowering of pH and an increase in short chain fatty acids (SCFAs), especially acetic acid, were observed. The DFA III-assimilating bacterium, Ruminococcus sp. M-1, was isolated from the cecal contents of DFA III-fed rats. The strain had 98% similarity with R. productus ATCC 27340T (L76595), and mainly produced acetic acid. These results confirmed that the bacteria harmful to host health were not increased by DFA III administration. Moreover, DFA III stimulated the growth of Ruminococcus sp. M-1 producing acetic acid, which may alter the intestinal microbiota towards a healthier composition. It is expected that DFA III would be a new candidate as a prebiotic.     

Novel stabilization system for polypropylene via the Ziegler–Natta catalyzed polymerization in the presence of aluminum aryloxide

The aluminum aryloxide was prepared via the reaction of phenolic antioxidant, 3‐(3,5‐di‐t‐butyl‐4‐hydroxyphenyl)‐N‐octadecylpropionamide, with triethyl aluminum. Propylene polymerization using supported Ziegler–Natta catalyst systems was carried out in the presence of the antioxidant or its aluminum aryloxide. Although the antioxidant gave rise to decrease in catalyst yield and change in hydrogen response, the aluminum aryloxide had no influence on the catalytic polymerization behavior, and thus the obtained polymer characteristics such as molecular weight, polydispersity, and meso pentad as a stereoregularity were comparable to that polymerized without the antioxidant and the aluminum aryloxide. Polypropylene obtained in the presence of the aluminum aryloxide was well stabilized for oxidation and its stability was over 1000 h at 100°C (estimated to be over 30 years at room temperature). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1350–1358, 2006