A self-stabilizing ring orientation algorithm with a smaller numberof processor states

A distributed system is said to be self-stabilizing if it will eventually reach a legitimate system state regardless of its initial state. Because of this property, a self-stabilizing system is extremely robust against failures; it tolerates any finite number of transient failures. The ring orientation problem for a ring is the problem of all the processors agreeing on a common ring direction. This paper focuses on the problem of designing a deterministic self-stabilizing ring orientation system with a small number of processor states under the distributed daemon. Because of the impossibility of symmetry breaking, under the distributed daemon, no such systems exist when the number n of processors is even. Provided that n is odd, the best known upper bound on the number of states is 256 in the link-register model, and eight in the state-reading model. We improve the bound down to 6³=216 in the link-register model     

Effect of O2 on NO removal by ammonia radical injection using one-cycle sinusoidal power source

NO reduction experiment was performed by injecting ammonia radicals, which were externally generated by flowing the NH₃ gas diluted with Ar gas through a dielectric barrier discharge with a one-cycle sinusoidal-wave power source. The discharge was intermittently formed between coaxial cylindrical electrodes with a space of 1.5 mm at an applied peak-to-peak voltage of 3-25 kV. The generated radicals were injected into simulation gas (NO/O₂/N₂). The simulation gas contained 0-5.6% O₂, and the effect of O₂ on NO_x removal was discussed. The minimum reaction temperature for NO reduction was low when simulation gas contained O₂. High O₂ concentration (O₂=5.6%) in simulation gas, high repetition rate to NH₃, and high applied power to NH₃ decreased NO removal efficiency.     

What Does a Pigeon (Columba livia) Brain Look Like During Homing? Selective Examination of ZENK Expression.

Lesion studies have shown that the avian hippocampus plays a crucial role in homing pigeon (Columba livia) navigation. Using the expression of the immediate early gene protein ZENK in intact pigeons, the authors found regional variation in hippocampal activation as a consequence of homing and, necessarily, the behavior and internal states that accompany it. Specifically, pigeons that homed displayed a significant increase in the number of ZENK-labeled cells in the lateral hippocampal formation compared with pigeons that did not home, whereas no difference was seen in the medial hippocampus. Significant changes in ZENK expression were also found in the medial striatum, which resembles the mammalian ventral striatum. The results identify portions of the hippocampal formation and the medial striatum as sites of plasticity associated with homing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Positive-realness analysis of sampled-data systems and its applications

In this paper, we first study strong positive-realness of sampled-data systems and introduce a measure called positive-realness gap index. We show that this index can be computed efficiently with a bisection method, and provide state space formulas for its computation. The importance of this index lies in that it is useful for robust stability analysis of sampled-data systems. An iterative procedure for computing an exact robust stability margin is given and illustrated through a numerical example.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Accelerated Discovery of Potent Bioactive anti-TNFα Aptamers by Microbead-Assisted Capillary Electrophoresis (MACE)-SELEX

Dysregulation of tumor necrosis factor-α (TNFα), a pro-inflammatory cytokine, causes several diseases, making it an important therapeutic target. Here, we identified a novel DNA aptamer against human TNFα using in vitro selection, which included a high exclusion pressure process against non-binding and weak binders through microbead-assisted capillary electrophoresis (MACE) in only three rounds. Among the 15 most enriched aptamers, Apt14 exhibited the highest inhibitory activity for the interaction between TNFα and its cognate receptor in mouse L929 cells. For further improving the bioactivity of the aptamer, dimerization programed by hybridization was evaluated, resulting in the Apt14 dimer exhibited a twofold higher binding affinity and stronger inhibition compared to the monomer counterpart. Rapid identification of bioactive aptamers using MACE in combination with facile dimerization by hybridization accelerates the discovery of novel bioactive aptamers, paving the way toward replacing current monoclonal antibody therapy with the less expensive and non-immunogenic aptamer therapy.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

Upgrading Titanium Ore Through Selective Chlorination Using Calcium Chloride

To develop a simple and effective process for upgrading low-grade titanium ore (ilmenite, mainly FeTiO₃), a new selective chlorination process based on the use of calcium chloride (CaCl₂) as the chlorine source was investigated in this study. Titanium ore and a titanium ore/CaCl₂ mixture were placed in two separate crucibles inside a gas-tight quartz tube that was then positioned in a horizontal furnace. In the experiments, the titanium ore in the two crucibles reacted with either HCl produced from CaCl₂ or CaCl₂ itself at 1100 K (827 °C), leading to the selective removal of the iron present in the titanium ore as iron chlorides [FeCl _x (l,g) (x = 2, 3)]. Various kinds of titanium ores produced in different countries were used as feedstock, and the influence of the particle size and atmosphere on the selective chlorination was investigated. Under certain conditions, titanium dioxide (TiO₂) with purity of about 97 pct was directly obtained in a single step from titanium ore containing 51 pct TiO₂. Thus, selective chlorination is a feasible method for producing high purity titanium dioxide from low-grade titanium ore.