Upgrading Titanium Ore Through Selective Chlorination Using Calcium Chloride

To develop a simple and effective process for upgrading low-grade titanium ore (ilmenite, mainly FeTiO₃), a new selective chlorination process based on the use of calcium chloride (CaCl₂) as the chlorine source was investigated in this study. Titanium ore and a titanium ore/CaCl₂ mixture were placed in two separate crucibles inside a gas-tight quartz tube that was then positioned in a horizontal furnace. In the experiments, the titanium ore in the two crucibles reacted with either HCl produced from CaCl₂ or CaCl₂ itself at 1100 K (827 °C), leading to the selective removal of the iron present in the titanium ore as iron chlorides [FeCl _x (l,g) (x = 2, 3)]. Various kinds of titanium ores produced in different countries were used as feedstock, and the influence of the particle size and atmosphere on the selective chlorination was investigated. Under certain conditions, titanium dioxide (TiO₂) with purity of about 97 pct was directly obtained in a single step from titanium ore containing 51 pct TiO₂. Thus, selective chlorination is a feasible method for producing high purity titanium dioxide from low-grade titanium ore.     

‘Lipase and protease production of dairy Penicillium sp. on milk‐protein‐based solid substrates’

The lipolytic and proteolytic activity of Penicillium camemberti PC TT033 and Penicillium roqueforti PR G3, cultured on the whey solids or simulated cheese media, were compared under several pH reaction conditions. Lipolytic activity was higher when both strains had been cultured on the whey medium than on the simulated cheese medium, whereas proteolytic activity was less influenced by the culture medium. The relationship between the reaction pH and these enzyme activities was dependent on the culture medium, which suggested that the expression level and balance of isozyme rely on the culture substrate.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.     

Monolithiation of 5,5′‐Dibromo‐2,2′‐bithiophene Using Flow Microreactors: Mechanistic Implications and Synthetic Applications

The lithiation of 5,5′‐dibromo‐2,2′‐bithiophene with one equivalent of an alkyllithium such as n‐BuLi or s‐BuLi was studied by varying the residence time in flow microreactors. With a short residence time, the product 2,2′‐bithiophene (3) derived from dilithiation was obtained preferentially and a significant amount of the starting material 5,5′‐dibromo‐2,2′‐bithiophene remained unchanged. An increase in the residence time caused a higher yield of the product 5‐bromo‐2,2′‐bithiophene derived from monolithiation with expense in the yields of 2,2′‐bithiophene and 5,5′‐dibromo‐2,2′‐bithiophene. The lithiation using MeLi gave the product 5‐bromo‐2,2′‐bithiophene preferentially even with a very short residence time.     

Efficient and precise cutting of zirconia ceramics using heated cutting tool

The thermally assisted machining of yttria-stabilized tetragonal zirconia polycrystal using a cutting tool heated with induction heating was proposed. Although the conventional thermally assisted machining cannot be applied to drilling, the proposed method can be. Heat transfer from the heated cutting tool to the workpiece was simulated analytically, and the result showed that heating of the tool up to 500 °C produced an increase of 150–400 °C in the workpiece temperature. Cutting experiments demonstrated an improvement in machinability.     

Hydrogenation and structural properties of Gd2Ni7 with superlattice structure

The crystal structure and hydrogenation properties of Ce₂Ni₇-type Gd₂Ni₇ were investigated by X-ray diffraction (XRD) and the hydrogen pressure–composition (P–C) isotherm. Ce₂Ni₇-type Gd₂Ni₇ was obtained by annealing at 1523 K for 12 h and quenching in ice water. Two superlattice reflections (002 and 004) of the Ce₂Ni₇-type were clearly observed at 2θ = 7.3° and 14.6° in the XRD profile. The refined lattice parameters were a = 0.49662(9) nm and c = 2.4255(3) nm, respectively. Two plateaus were clearly observed during the absorption–desorption process in the P–C isotherm. The first and second plateaus were at 0.015 and 0.13 MPa, respectively, in the first desorption. The maximum hydrogen capacity reached was 1.13 H/M. The enthalpy and entropy were calculated as −20 kJ/mol H₂ and −80 J/mol H₂ K, respectively, from the van’t Hoff plot. After the P–C isotherm, the GdNi₅ cell expanded by 2.15%, but the Gd₂Ni₄ cell shrank by 2.83%.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Properties of Hopfield model with the zero-order synaptic decay

In this paper, we investigate the effect of synaptogenesis on memories in the brain, using the abstract-associative memory model, Hopfield model with the zero-order synaptic decay. Using the numerical simulation, we demonstrate the possibility that synaptogenesis plays a role in maintaining recent memories embedded in the network while avoiding overloading. For the network consisting of 1000 units, it turned out that the minimum decay rate to avoid overloading is 0.02, and the optimal decay rate to maximize the storage capacity is 0.08. We also show that the average numbers of replacement synapses at each learning step corresponding to these two values are 1187 and 21024, respectively.