Evolution of TiS and TiN in Fe-40 MassPctNi Austenitic Alloy During Heating at 1273 K (1000 °C)

Metallurgical and Materials Transactions B - Evolution of TiS in composition and morphology as well as the change in size distribution of TiS and TiN in Fe-40 masspctNi austenitic alloy during...     

Stoichiometry Control for the Tuning of Grain Passivation and Domain Distribution in Green Quasi‐2D Metal Halide Perovskite Films and Light‐Emitting Diodes

Quasi‐2D metal halide perovskite films are promising for efficient light‐emitting diodes (LEDs), because of their efficient radiative recombination and suppressed trap‐assisted quenching compared with pure 3D perovskites. However, because of the multidomain polycrystalline nature of solution‐processed quasi‐2D perovskite films, the composition engineering always impacts the emitting properties with complicated mechanisms. Here, defect passivation and domain distribution of quasi‐2D perovskite films prepared with various precursor compositions are systematically studied. As a result, in perovskite films prepared from stoichiometric quasi‐2D precursor compositions, large organic ammonium cations function well as passivators. In comparison, precursor compositions of simply adding large organic halide salt into a 3D perovskite precursor ensure not only the defect passivation but also the effective formation of quasi‐2D perovskite domains, avoiding unfavorable appearance of low‐order domains. Quasi‐2D perovskite films fabricated with a well‐designed precursor composition achieve a high photoluminescence quantum yield of 95.3% and an external quantum efficiency of 14.7% in LEDs.     

Recent progress in the preparation,characterization, and applications of nanofibers and nanofiber membranes via electrospinning/interfacial polymerization

Significant progress has been made recently in the fabrication of polymeric nanofibers, their characterization and applications, new polymeric materials, theoretical analysis, and so forth. Hence, in this brief review, we report the progress made in these subjects during the last 5 years. Most of the work concerns nanofibers related to the field of medicine. On the other hand, negligibly few reports have been found on nanofibers related to membrane separation processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Optical properties of end-sealed hollow fibers

We propose sealing techniques for medical hollow fibers to protect the inner surface of fibers from debris or water that scatters from targets. First, hollow fibers are sealed with a film of polymer that is easily formed by use of a dipping technique. The transmission loss of 20-microm-thick sealing film was 0.2 dB for Er:YAG laser light, and the maximum energy that is available for the film was 180 mJ. Second, a sealed glass cap was applied to the output end of hollow fiber. The silica-glass cap with a wall thickness of 400 microm shows a transmission loss of 0.5 dB and was not damaged by radiation of 400-mJ energy pulses.     

Classification and function prediction of proteins using data compression

Protein has a complicated spatial structure, and has chemical and physical functions which originate from this structure. It is important to predict the structure and function of proteins from a DNA sequence or amino acid sequence from the viewpoint of biology, medical science, protein engineering, etc. However, to data there is no way to predict them accurately from these sequences. Instead, some approaches attempt to estimate the functions based on an approximate similarity in the retrieval of sequences. We propose a new method for the similarity retrieval of an amino acid sequence based on the concept of homology retrieval using data compression. The introduction of compression by a dictionary technique enables us to describe the text data as ann-dimensional vector usingn dictionaries, which is generated by compressingn typical texts, and enables us to classify the proteins based on their similarity. We examined the effectiveness of our proposal using real genome data. This work was presented in part at the Sixth International Symposium on Artificial Life and Robotics, Tokyo, January 15–17, 2001     

Calculation of phase diagrams for the FeCl2, PbCl2, and ZnCl2 binary systems by using molecular dynamics simulation

Recently, molecular dynamics (MD) simulation has been widely employed as a very useful method for the calculation of various physicochemical properties in the molten slags and fluxes. In this study, MD simulation has been applied to calculate the structural, transport, and thermodynamic properties for the FeCl₂, PbCl₂, and ZnCl₂ systems using the Born—Mayer—Huggins type pairwise potential with partial ionic charges. The interatomic potential parameters were determined by fitting the physicochemical properties of iron chloride, lead chloride, and zinc chloride systems with experimentally measured results. The calculated structural, transport, and thermodynamic properties of pure FeCl₂, PbCl₂, and ZnCl₂ showed the same tendency with observed results. Especially, the calculated structural properties of molten ZnCl₂ and FeCl₂ show the possibility of formation of polymeric network structures based on the ionic complexes of ZnCl ₄ ²⁻ , ZnCl ₃ ⁻ , FeCl ₄ ²⁻ , and FeCl ₃ ⁻ , and these calculations have successfully reproduced the measured results. The enthalpy, entropy, and Gibbs energy of mixing for the PbCl₂-ZnCl₂, FeCl₂-PbCl₂, and FeCl₂-ZnCl₂ systems were calculated based on the thermodynamic and structural parameters of each binary system obtained from MD simulation. The phase diagrams of the PbCl₂-ZnCl₂, FeCl₂-PbCl₂, and FeCl₂-ZnCl₂ systems estimated by using the calculated Gibbs energy of mixing reproduced the experimentally measured ones reasonably well.     

A New CMC-AA Resin/Inorganic-gel Super Absorbent Material

A super absorbent material was prepared with the super absorbent resin （ SAR ） and inorganic gel. The SAR of the carboxymethyl cellulose grafting acrylic acid （ CMC-AA ） was copolymer synthesized using the method of inverse-phase suspension polymerization. The influences of the monomer concentration, neutralization degree, the initiator, dispersion agent, cross-linking agent, reaction and drying temperature on the grafting copolymer properties were examined. Meanwhlie, its properties was investigated and the model for absorption mechanism of this absorbent composite was proposed.     

Behavior of Buried Flexible Pipe under High Fills and Design Implications

The existing design guidelines for buried flexible pipes are limited to depth up to 10?m. The increasing use of difficult terrains for infrastructure, landfills, and residential and industrial developments has prompted installation of drainage pipelines under 20–30?m high fills. This paper presents the behavior of an instrumented flexible pipe buried under a 47.1?m deep fill. For filling above 20?m, the measured vertical stress above the pipe exhibited a concave distribution, corresponding to 90 and 110% of the average vertical pressure at the center and edges of the pipe, respectively. The measured results suggest that a triangular lateral pressure distribution can lead to overly conservative and uneconomical results for high fills while Spangler’s analysis is unconservative. Based on the measured results, a revised vertical and lateral earth pressure diagram was proposed for the design of flexible pipe under high fills >20?m. This paper proposes closed-form analyses for estimating the moments and displacements of the pipe subjected to high fill earth pressures. These closed-form solutions agree well with the measured pipe displacements and strains.