Electroplating of nickel films at ultra low electrolytic temperature

In this paper, we have demonstrated a successful electroplating process of nickel (Ni) in a sulfamate electrolyte bath at ultra low electrolytic temperatures of 273–278 K. The potentiostatic mode is essential for the electroplating process rather than galvanostatic mode. The reason is that diffusion-limited current can be easily obtained by applying a specific potential which is higher than reduction potential. On the contrary, galvanostatic mode can not identify the diffusion-limited current and the reduction will suspend while the setting current is higher than diffusion-limited current ranged in hundreds of μA. The microstructure, morphology and hardness of the Ni electrodeposits were characterized using grazing incidence x-ray diffractometer, atomic force microscopy and nano-indentation test were performed. The hardness of Ni film was much enhanced to around 6.37 GPa at 273 K to 6.18 GPa at 278 K compared with that around 4.11 GPa at 288 K to 4.01 GPa at 293 K. The normal hardness of pure nickel is about 4 GPa. The enhanced hardness of Ni at ultra low temperature is attributed to both mechanisms of reduced grain size strengthening and residual compressive stress hardening.     

Effect of oxalic acid concentration on the formation of anodic aluminum oxide using pulse anodization at room temperature

Most anodic aluminum oxide (AAO) or porous anodic aluminum (PAA) films were fabricated using the potentiostatic method from high-purity (99.999%) aluminum films at low temperatures of 0–10°C to avoid dissolution effects at room temperature (RT). In this article, the fabrication of AAO or PAA film from commercial purity (99%) aluminum at RT has been investigated using hybrid pulse anodization under different oxalic acid concentration and process duration. The effect of acid concentration and anodization duration on the formation of AAO size and morphology has been studied. Both pore diameter and oxide layer thickness of AAO films were examined via SEM images and found that both increased with increasing oxalic concentration and anodization duration. In addition, the pore distribution was more concentrated at high electrolytic concentration and anodization duration.     

Energy- and Latency-Efficient Processing of Full-Text Searches on a Wireless Broadcast Stream

In wireless mobile computing environments, broadcasting is an effective and scalable technique to disseminate information to a massive number of clients, wherein the energy usage and latency are considered major concerns. This paper presents an indexing scheme for the energy- and latency-efficient processing of full-text searches over the wireless broadcast data stream. Although a lot of access methods and index structures have been proposed in the past for full-text searches, all of them are targeted for data in disk storage, not wireless broadcast channels. For full-text searches on a wireless broadcast stream, we firstly introduce a naive, inverted list-style indexing method, where inverted lists are placed in front of the data on the wireless channel. In order to reduce the latency overhead, we propose a two-level indexing method which adds another level of index structure to the basic inverted list-style index. In addition, we propose a replication strategy of the index list and index tree to further improve the latency performance. We analyze the performance of the proposed indexing scheme with respect to the latency and energy usage measures, and show the optimality of index replication. The correctness of the analysis is demonstrated through simulation experiments, and the effectiveness of the proposed scheme is shown by implementing a real wireless information delivery system.     

Schema mapping and query translation in heterogeneous P2P XML databases

Peers in a peer-to-peer data management system often have heterogeneous schemas and no mediated global schema. To translate queries across peers, we assume each peer provides correspondences between its schema and a small number of other peer schemas. We focus on query reformulation in the presence of heterogeneous XML schemas, including data–metadata conflicts. We develop an algorithm for inferring precise mapping rules from informal schema correspondences. We define the semantics of query answering in this setting and develop query translation algorithm. Our translation handles an expressive fragment of XQuery and works both along and against the direction of mapping rules. We describe the HePToX heterogeneous P2P XML data management system which incorporates our results. We report the results of extensive experiments on HePToX on both synthetic and real datasets. We demonstrate our system utility and scalability on different P2P distributions.     

Frictional properties of VA‐mode alignment‐film surfaces studied by frictional force microscopy

Abstract— The surface‐friction characteristics of the post‐bake temperature were compared to that of the rubbing condition on VA‐mode alignment films (AFs) using frictional force microscopy (FFM). The surface roughness and the surface frictional force increased when the temperature was elevated. However, the frictional asymmetry could not be detected by the frictional loop due to the instability of the side‐chain molecular arrangement. For the inter‐influences of the total friction and surface roughness, the density of the side chain was changed and it was intentionally rubbed for evaluation. The results showed that the total friction was higher when the rubbing was stronger and side‐chain density lower, and the surface roughness also increased in the same manner. This can be explained by the potential interaction due to the curved structure of the side‐chain surface that establishes the probe that is scanned and the top surface layer. In order to confirm the influence of the pre‐tilt angle on the tilt of the side chain, a test cell was produced under the same conditions and evaluated. The results showed that the pre‐tilt‐angle decreased according to the difference in density of the side chain and strength of rubbing after injecting liquid‐crystal (LC).     

360°‐viewable cylindrical integral imaging system using a 3‐D/2‐D switchable and flexible backlight

Abstract— A 360°‐viewable cylindrical three‐dimensional (3‐D) display system based on integral imaging has been implemented. The proposed system is composed of a cylindrically arranged electroluminescent (EL) pinhole film, an EL film backlight, a barrier structure, and a transmission‐type flexible display panel. The cylindrically arranged point‐light‐source array, which is generated by the EL pinhole film reconstructs 360°‐viewable virtual 3‐D images at the center of the cylinder. In addition, the proposed system provides 3‐D/2‐D convertibility using the switching of EL pinhole film from a point light source to a surface light source. In this paper, the principle of operation, analysis of the viewing parameters, and the experimental results are presented.     

The moderating effects of psychological reactance and product involvement on online shopping recommendation mechanisms based on a causal map

The use of the Internet in the daily activities of individuals and firms has become entrenched, and online shopping has become commonplace. However, debates about how online shopping recommendation mechanisms (OREMs) should be designed have not been completely resolved. The challenge with traditional online shopping recommendation mechanisms (TR-OREMs) is that they focus too much on quantitative factors. Thus, they ignore causal interrelationships with qualitative factors that are believed to significantly impact quantitative factors. Considering only quantitative factors and ignoring qualitative ones likely distorts the final recommendation results. Another problem with TR-OREMs is that they ignore the perceived psychological reactance of consumers against the recommended products. Such consumer reactance may be reduced when the causal interrelationships among all the quantitative and qualitative factors are analyzed and incorporated properly into the OREM. To overcome these problems, we propose a causal map – online shopping recommendation mechanisms (CM-OREMs) based on a causal map. We analyzed possible causal relationships among quantitative and qualitative factors and incorporated them in the recommendation process to reduce consumer reactance against the recommendation results. Furthermore, an elaboration likelihood model (ELM) was used to build hypotheses about how the online shopping behavior of consumers is affected by OREMs based on the proposed causal map. Specifically, the performance of the proposed OREM was empirically analyzed by gathering experiment data from qualified respondents who were asked to refer to the proposed OREM before making purchasing decisions via mobile phones. Statistical results showed that the proposed OREMs could enhance consumer decision satisfaction, decision confidence, and attitude toward the recommended products. It could also positively affect consumer purchasing intentions. The OREM had a greater effect on the high-reactance group of participants than on the low-reactance group as well as on a high-involvement product versus a low-involvement product.     

A gradient-based adaptive error diffusion method with edge enhancement

This paper presents a gradient-based adaptive error diffusion method with edge enhancement effect while preserving the smoothness effect. The proposed method not only can modulate the threshold in halftoning dynamically but also can determine the weights of the error diffusion filter adaptively to diffuse the quantization error to neighboring pixels properly. Under six testing images, experimental results demonstrate that our proposed new error diffusion method has a good compromise between the edge enhancement effect in the halftone image and the image quality effect in the corresponding inverse halftone image when compared to the methods by Floyd–Steinberg, Eschbach and Knox, Hwang et al., Li, and Feng et al., but it has some execution-time degradation.     

Online deadline scheduling with preemption penalties

This paper presents a study of the problem of online deadline scheduling under the preemption penalty model of Zheng, Xu, and Zhang (2007). In that model, each preemption incurs a penalty of ρ times the weight of the preempted job, where ρ ? 0 is the preemption penalty parameter. The objective is to maximise the total weight of jobs completed on time minus the total penalty.     

An efficient tabu search algorithm to the cell formation problem with alternative routings and machine reliability considerations

Cell formation is the first step in the design of cellular manufacturing systems. In this study, an efficient tabu search algorithm based on a similarity coefficient is proposed to solve the cell formation problem with alternative process routings and machine reliability considerations. In the proposed algorithm, good initial solutions are first generated and later on improved by a tabu search algorithm combining the mutation operator and an effective neighborhood solution searching mechanism. Computational experiences from test problems show that the proposed approach is extremely effective and efficient. When compared with the mathematical programming approach which took three hours to solve problems, the proposed algorithm is able to produce optimal solutions in less than 2 s.