High temperature polymerization of propylene catalyzed by MgCl2‐supported Ziegler–Natta catalyst with various cocatalysts

Four cocatalysts, referred to as ethylaluminoxanes, were synthesized by the reaction between triethylaluminium (AIEt₃) and water under various molar ratios of H₂O/Al at ?78°C. Aluminoxanes were used as cocatalysts for a MgCl₂‐supported Ziegler–Natta catalyst for propylene polymerization at temperatures ranging from 70 to 100°C. When the polymerization was activated by AlEt₃, the activity as well as the molecular weight and isotacticity of the resulting polymer gradually dropped as the temperature varied from 70 to 100°C. When ethylaluminoxane was employed as the cocatalyst, good activity and high molecular weight and isotacticity were obtained at 100°C. Furthermore, when the cocatalyst varied from AlEt₃ to ethylaluminoxane, the atactic fraction and polymer fraction with moderate isotacticity decreased and the high isotactic fraction slightly increased, which indicated that the variation of the cocatalyst significantly affects the isospecificity of active sites. It was suggested that the reactivity of the Al‐Et group and the size of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different temperatures. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1978–1982, 2006     

Morphology of conducting polymeric coatings: quantitative comparison between theory and experiment

The density profile of electrosynthesized polymeric layers on carbon fibers is obtained from gravimetric and scanning electron microscopy (SEM) data. The coating density ρ is found to decrease with increasing radial distance, r, subject to the power law . Based on a modified diffusion-limited aggregation (DLA) model, it is shown that lattice Monte Carlo simulation of the coating process predicts the experimentally observed power law exponent.     

Surface Preparation of Tantalum for Encapsulation and Adhesive Bonding

A number of methods of surface preparation of tantalum for encapsulation in silicone rubber and for structural adhesive bonding were explored. The only ones which could be generally useful were boiling for 24 hours in distilled water (28% improvement) or boiling for 4 hours in 20% sodium hydroxide solution followed by boiling for 2 hours in dilute hydrochloric acid (34% improvement). An alternative, which could sometimes be used, was heating in air for at least 2 hours at 100°C.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.     

两步法合成大粒径丁苯胶乳

研究了聚甲基丙烯酸甲酯（MMA）对丁苯（BS）胶乳的附聚作用以增大丁苯胶乳粒径；探讨了无机盐、体系pH值及体系中MMA胶乳与BS胶乳的固含量比（R值）对附聚后丁苯胶乳的粒径及稳定性的影响。结果表明：适当添加无机盐可以稳定胶乳体系，最佳用量（质量分数）为0．1％～0．2％；适当增大体系pH值，可增大胶乳粒径；在附聚过程中，当R值在两个附聚峰附近时，可增大丁苯胶乳的粒径。     

棉籽油间歇式酯交换反应动力学的研究

生物柴油(棉籽油甲酯)可以由棉籽油与甲醇在催化剂KOH存在下通过酯交换反应制得。故对棉籽油间歇式酯交换反应动力学进行了研究,并考察了反应温度和催化剂浓度对产物棉籽油甲酯浓度的影响。用液相色谱法分析棉籽油的组成;用气相色谱法分析产物中棉籽油甲酯的含量。由实验数据绘制的动力学曲线得到酯交换反应在开始阶段为准二级反应,以后紧接转为一级反应和零级反应,与文献报导的棕榈油酯交换反应动力学结果一致。由实验数据求出酯交换反应在开始阶段的动力学参数,35℃、45℃时的反应速率常数分别为0.9179Lmol-1min-1和1.049Lmol-1min-1,酯交换反应的活化能为10.88kJmol-1。根据实验结果得到棉籽油酯交换反应的最佳反应温度为45℃,最佳催化剂为1.1%KOH。     

硕士学位授权点审核系统设计与实现

为了使传统的审核过程信息化、数字化,对硕士学位授权点审核系统将要实现的管理功能进行分析,并介绍了开发技术和发布平台的设计,以及在建设过程中要解决的关键性问题。该系统开发之后,已在本省上线并运行,效果良好。希望该系统的设计、实现和实际运行能够为其他兄弟省份提供借签。     

基于iebook的电子书播放外部视频功能的实现

Exe类型电子书制作软件集成文字内容和小图片非常容易,效果也很不错,但是对集成高品质的音视频、数码照片等大容量数据文件却无能为力。通过对iebook超级精灵自带模板以及Exe电子书文件的深入分析,把flash技术、流媒体对象和file协议有机结合,实现动态加载指定相对路径下的外部视频文件到电子书中,大大提高了iebook超级精灵在处理多媒体方面的实用性。     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。     

Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: Experimental and modeling

This paper presents a mathematical model based on the reaction rate expressions to describe the displacement of methane conversion in the steam reforming. The effect of several parameters including weight hourly space velocity (WHSV), load-to-surface ratio, reaction pressure, hydrogen partial pressure in permeate side and reaction temperature were investigated. Simulation and experimental results showed that a conversion higher than 80% could be achieved in a palladium membrane reactor at reaction temperature of 500 °C relative to 850 °C in a conventional fixed bed reactor (FBR). Besides, the yield of CO (<2%) in membrane reactor was much lower than that (>50%) in the FBR, which indicated the significant depression of CO production in use of membrane reactor.