Polymer/bioactive glass nanocomposites for biomedical applications: A review

Nanoscale bioactive glasses have been gaining attention due to their reported superior osteoconductivity when compared to conventional (micron-sized) bioactive glass materials. The combination of bioactive glass nanoparticles or nanofibers with polymeric systems enables the production of nanocomposites with potential to be used in a series of orthopedic applications, including scaffolds for tissue engineering and regenerative medicine. This review presents the state of art of the preparation of nanoscale bioactive glasses and corresponding composites with biocompatible polymers. The recent developments in the preparation methods of nano-sized bioactive glasses are reviewed, covering sol–gel routes, microemulsion techniques, gas phase synthesis method (flame spray synthesis), laser spinning, and electro-spinning. Then, examples of the preparation and properties of nanocomposites based on such inorganic bionanomaterials are presented, obtained using various polymer matrices, including polyesters such as poly(hydroxybutyrate), poly(lactic acid) and poly(caprolactone), and natural-based polymers such as polysaccharides (starch, chitin, chitosan) or proteins (silk fibroin, collagen). The physico-chemical, mechanical, and biological advantages of incorporating nanoscale bioactive glasses in such biodegradable nanocomposites are discussed and the possibilities to expand the use of these materials in other nanotechnology concepts aimed to be used in different biomedical applications are also highlighted.     

High-Performance Vector-Controlled AC Motor Drives: Applications and New Technologies

A high-performance ac motor control has been developed by employing the vector control concept. Its versatility has been proven through the six years of experience in applications to pinch roll drives of continuous casting plants, machine tool spindle drives, and other drive systems in industry. Equivalent torque characteristics are achieved with ac motors compared to dc motors without direct detection of the magnetic flux. The effect of rotor temperature on the torque characteristics has been compensated to a satisfactory level in actual industrial use by various means. Servo drives, both synchronous motor and induction motor types, have been introduced. The test results show that the performance of ac servo drives is equivalent or superior to that of the PWM-controlled dc servo drives. Furthermore, an example of the direct-drive servo is described, where an ultra-low speed high-torque motor and an ultra-high resolution position sensor play key roles. In addition, the possibility of a more sophisticated servo drive exploiting modern control theory is suggested.     

In vitro construction and screening of a Burkholderia cepacia lipase library using single-molecule PCR and cell-free protein synthesis

A mutant library of Burkholderia cepacia lipase KWI-56 was constructed on microplates by a cell-free process and tested with a chromogenic assay. This high-throughput construction system can be used to screen mutant proteins based on their catalytic activity.     

Exact solution of electromagnetic scattering by a three-dimensional hexagonal ice column obtained with the boundary-element method

The combined field integral equation is solved for electromagnetic scattering of a three-dimensional hexagonal ice column and is tested to investigate its applicability to radiation transfer in ice clouds. Convergence of a solution and the influence of rounding the hexagonal edges were checked, and no practical problems were found. The scattering characteristics of a hexagonal ice column are discussed from the size of the Rayleigh scattering region to the size at which a ray optics character appears. The size parameter of a hexagonal column is as much as 50, which was limited by computer resources.     

Dynamic mechanical properties of hydroxyapatite-reinforced and porous starch-based degradable biomaterials

It has been shown that blends of starch with a poly(ethylene-vinyl-alcohol) copolymer, EVOH, designated as SEVA-C, present an interesting combination of mechanical, degradation and biocompatible properties, specially when filled with hydroxyapatite (HA). Consequently, they may find a range of applications in the biomaterials field. This work evaluated the influence of HA fillers and of blowing agents (used to produce porous architectures) over the viscoelastic properties of SEVA-C polymers, as seen by dynamic mechanical analysis (DMA), in order to speculate on their performances when withstanding cyclic loading in the body. The composite materials presented a promising performance under dynamic mechanical solicitation conditions. Two relaxations were found being attributed to the starch and EVOH phases. The EVOH relaxation process may be very useful in vivo improving the implants performance under cyclic loading. DMA results also showed that it is possible to produce SEVA-C compact surface/porous core architectures with a mechanical performance similar to that of SEVA-C dense materials. This may allow for the use of these materials as bone replacements or scaffolds that must withstand loads when implanted.     

Responses of maxillary sensilla styloconica inBombyx mori to glucosides fromOsmunda japonica,a nonhost plant

We isolated glucosides from the royal fern,Osmunda japonica, which elicit a deterrent response in larvae ofBombyx mori. These compounds were absent in taro (Colocasia antiquorum) and castor-oil plant (Ricinus communis) leaves and did not evoke responses of sensory cells in the lateral and medial sensilla styloconica ofSpodoptera litura. This glucoside extract of the royal fern leaves stimulates receptors generally associated with deterrent. It is also possible that this compound may act as a behavioral deterrent, and from actual feeding tests, it is suggested that this compound may prevent feeding in some monophagous insects, such asBombyx mori. The deterrent glucoside possesses a noncyclic aglycon.     

Starch–chitosan hydrogels prepared by reductive alkylation cross-linking

Starch-chitosan hydrogels were produced by oxidation of soluble starch to produce polyaldehyde and subsequently cross-linked with chitosan via reductive alkylation. The swelling ratio of starch-chitosan membranes was increased gradually with increasing starch ratio, but it was always lower than the native chitosan. In dry state, starch-chitosan membranes with low starch ratio (0.16, 0.38) showed similar tensile strength values to those of native chitosan while these values decreased with increasing starch ratios (0.73-1.36). Membranes in physiological buffer solution (PBS) gave a tensile modulus between 2.8 and 1.0 MPa, decreasing with increasing starch ratio (0.16-1.36 (Wstarch/Wchitosan)). When the membranes were incubated in PBS only, a moderate weight loss was observed for the first two weeks. Original weights of low starch weight ratio membranes (0-0.38) were at near 85%, while high ratio samples (0.73-1.55) were kept around 70% after three months. However, for the membranes incubated in alpha-amylase solution, very fast weight loss was observed. For low starch ratio membranes (0.16, 0.38, 0.73), the residual original weights were measured to be 11%, 6%, 20%, while for high ratio membranes (1.04 and 1.36) these were 45% and 30%, respectively, after two months of enzyme incubation. Scanning electron microscopy analysis of alpha-amylase degraded membranes exhibited rough surface morphology.     

An aqueous suspension system for phospholipase D-mediated synthesis of PS without toxic organic solvent

Enzymatic synthesis of PS by phospholipase D (PLD)-mediated transphosphatidylation in an aqueous media was investigated. The purpose of this study was to establish a novel synthetic method where no toxic organic solvents were used. An attempt to react soybean lecithin (simply dispersed in an aqueous buffer) with an aqueous solution of l-serine and PLD was unsuccessful, giving only 20% of PS. By contrast, a suspension of lecithin adsorbed on fine powders such as silica was effectively converted into PS in an aqueous solution of l-serine and PLD. After screening various powders for use as the lecithin adsorbent, calcium sulfate was found to be the best with respect to lecithin conversion. In addition, calcium sulfate did not require prior adsorption of lecithin (i.e., the reaction proceeded effectively simply by adding the powder to an aqueous mixture of lecithin, l-serine, and PLD). With this “aqueous suspension system” of calcium sulfate, up to 180 mg/mL lecithin was completely converted, resulting in more than 80% PS in 24 h. The synthesized PS could easily be recovered from the powder by extracting with a mixture of n-hexane, ethanol, and diluted HCl.     

Scanning electron microscopy of food-poisoning bacterium Bacillus cereus using a variable-pressure SEM

A variable-pressure scanning electron microscopy (VP-SEM) with a cooling stage permits long hours of observation of water-containing specimens in their natural or close to natural state, without the conventional specimen preparations of fixation, dehydration, drying and metal coating. It reduces water vaporization and beam damage by keeping the specimens at a low temperature. We observed Bacillus cereus colonies on nutrient agar, which would shrink significantly if any conventional specimen preparation technique were used. We also studied the growing process of the bacteria on raw and steamed rice using the VP-SEM without conventional preparation techniques. Original specimens were directly mounted onto specimen holders and their backscattered electron images observed under the following conditions: specimen stage temperature, -10 degrees C; specimen chamber vacuum level, 30-70 Pa; and accelerating voltage, 15-20 kV. We recognized that the VP-SEM minimized deformation of the colonies due to shrinkage of the nutrient agar, and successfully imaged the morphology of the colonies and bacteria without a decline in bacteria number, which is apt to occur during fixation and dehydration. Also, the growth process of the bacteria on raw or steamed rice could be observed promptly, since there is no specimen preparation step.