Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.     

Arrangements of uniformly sized particles in a powder bed

The volume of the unit cell of a powder bed in a general case is calculated, and an equation is proposed for calculating the porosity of the bed consisting of uniformly sized ellipsoidal particles in contact and regularly arranged. In the case of uniformly sized spherical particles in contact, the equation can be simplified.Three dimensions and face angles of the unit cell are given for each regular arrangement both in cases of ellipsoidal and spherical particles. The values of the porosity are calculated by using the author's equation: the results for both ellipsoids and spheres are equal when tire particle arrangements are the same.The face angles of the unit cells proposed by Graton and Fraser are modified in two cases by the author's method of calculation and a system omitted from their classification is described. Other equations for calculation of the porosity are discussed.     

Microstructure and mechanical properties of Pt-added and Pd-added Zr-20Nb alloys and their metal release in 1 mass% lactic acid solution

The effects of Pt and Pd addition to a Zr-20Nb alloy on its microstructure and mechanical property, as well as the elution of metals from the alloys in lactic acid solution, were investigated. The microstructure was characterized with an X-ray diffractometer (XRD), an optical microscope (OM), and a transmission electron microscope (TEM). The mechanical properties were evaluated by a tensile test. The β phase is dominantly observed in the Zr-20Nb as well as in the Pt-added and Pd-added Zr-20Nb alloys. Needle-like microstructures are observed in equiaxed grains in all alloys. Pd addition to the Zr-20Nb alloy suppresses ω phase formation more than Pt addition does. The 0.2% offset yield strength and the ultimate tensile strength of the Pt-added and Pd-added Zr-20Nb alloys increase with the Pt and Pd concentrations. XRD analysis revealed that the lattice parameter of β-Zr in the Pt-added and Pd-added Zr-20Nb alloys decreases with the Pt and Pd concentrations. Pt and Pd solute in β-Zr as a substitutional element and contribute to the increase in the strength by solid solution hardening. The addition of 2Pt and 2Pd to the Zr-20Nb alloy also improves metal elution from the alloys in lactic acid solution.     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Streptozotocin-induced diabetic cynomolgus monkey is a model of hypertriglyceridemia with low high-density lipoprotein cholesterol

BACKGROUND: Cardiac allograft rejection is accompanied by cellular infiltration and tissue edema resulting in myocardial relaxation abnormalities. Doppler tissue imaging is capable of measuring myocardial relaxation velocities and is useful in the detection of heart rejection. However, the influence of ventricular loading conditions on myocardial relaxation velocities has not been studied. This study is performed to determine whether myocardial relaxation velocities are affected by left ventricular loading conditions. METHODS: Twenty heart transplant recipients without evidence of rejection by endomyocardial biopsy underwent preload and afterload reduction with nitroglycerin. The pulmonary wedge pressure was reduced from 18.2+/-0.9 to 12.0+/-0.9 mm Hg 9 (p=0.001) and the mean blood pressure from 130.0+/-5.6 to 116.1+/-7.0 mm Hg (p=0.001). Pulsed-wave Doppler tissue imaging was performed before and after administration of nitroglycerin, and the peak myocardial relaxation velocities of the inferior wall were measured. RESULTS: Myocardial relaxation velocities did not change with the administration of nitroglycerin; 0.188+/-0.009 to 0.178+/- 0.006 m/sec (p=0.4) in spite of a significant reduction in pulmonary capillary wedge pressure. Furthermore, there was no correlation between pulmonary capillary wedge pressure, mean arterial pressure, wall stress, and myocardial relaxation velocities. CONCLUSIONS: Loading conditions on the left ventricle have no influence on myocardial relaxation velocities. Therefore in heart transplant recipients changes in myocardial relaxation velocities by Doppler tissue imaging may be useful in the diagnosis of rejection, in spite of diverse loading conditions.     

A case of ventricular septal perforation treated surgically with an infarction exclusion technique

We report an 85-year-old woman with postinfarction interventricular septal perforation. She underwent successful emergent surgical treatment by a slightly modified method based on David-Komeda's procedure. Perforation in this case occurred four days after acute myocardial infarction. Preoperative Qp/Qs was 2.58, and pulmonary artery pressure was 34/25 mmHg. The area of infarction was large, and the perforation was the linear type 2.5 cm long near the apex. A probe was not able to pass through the perforation due to its complicated configuration. A double Xenomedica patch was sutured on the left side of the interventricular septum without excising the infarcted area. The suture line was placed on healthy myocardium apart from the infarcted area. The Xenomedica patch was sandwiched between the closure line of the ventriculotomy. Four days after surgery, residual shunt was observed by echocardiogram, but this subsequently disappeared on the 17th postoperative day. The patient was discharged from our hospital on the 57th postoperative day, and is now doing quite well.     

Reaction of Syringylglycerol-β-Syringyl Ether Type of Lignin Model Compounds in Alkaline Medium

Reactions of three kind of syringylglycerol- β-syringyl ether type model compounds under alkaline medium were investigated. Sinapyl alcohol and β-hydroxypropiosyringone were formed as phenyl propanoid moieties from syringylglycerol- β-(methyl-syringyl) ether 1 by the β-aryl ether cleavage under soda treatment, while only sinapyl alcohol was formed from syringylglycerol- β-syringyl ether 2. The formation of both two degradation products are quite interesting because there is no nucleophilic additives in soda liquor. A possible reaction mechanisms for the β-aryl cleavage of syringylglycerol-β-syringyl ether type is homolytical cleavage via quinone methide.