Adsorption mechanism of hexavalent chromium by redox within condensed-tannin gel

We have proposed a new recovery system of hexavalent chromium Cr(VI) that is of great toxicity utilizing condensed-tannin gels derived from a natural polymer with many polyhydroxyphenyl groups. The adsorption mechanism of Cr(VI) to the tannin molecules was clarified. The adsorption mechanism consists of four reaction steps; the esterification of chromate with tannin molecules, the reduction of Cr(VI) to trivalent chromium Cr(III), the formation of carboxyl group by the oxidation of tannin molecules and the ion exchange of the reduced Cr(III) with the carboxyl and hydroxyl groups. It was found in this recovery system that a large amount of proton was consumed accompanied with the reduction of Cr(VI) so that the acidic solution containing Cr(VI) was transferred automatically to neutral one by choosing an appropriate initial pH. The carboxyl group which was created by the oxidation of tannin molecules parallel to the reduction of Cr(VI) to Cr(III) contributed to an increase in the ion-exchange sites of the reduced Cr(III). The maximum adsorption capacity of Cr(VI) reached 287 mg Cr/g dry tannin gel under the conditions of 0.77 water content of tannin gel and the initial pH = 2. This adsorption capacity was five to ten times higher than that obtained by the ion exchange between ordinary Cr(III) and tannin molecules for the tannin gels prepared under similar conditions. The system proposed here will provide an important information on a zero-emission-oriented process because it has such advantages as higher adsorption capacity of chromium and lower volume of secondary wastes compared with conventional process.     

Effect of humidity on human comfort and productivity after step changes from warm and humid environment

Subjective experiments were conducted to evaluate the effects of humidity on human comfort and productivity under transient conditions from hot and humid environment to thermally neutral condition. Two climate chambers, “Chamber 1” and “Chamber 2”, adjoined each other were used for this study. Subjects were exposed to 30 °C/70%RH air in Chamber 1 for 15 min with 2.0 met of metabolic rate. Then they moved into Chamber 2, where 4 humidity conditions, 30, 40, 50 and 70%RH were examined. Air temperature was adjusted to keep SET* constant at 25.2 °C for all conditions. Subjects were exposed in Chamber 2 for 180 min performing 2 kinds of simulated office work.

Positive effects of low humidity on subjective pleasantness were found under transient condition at low humidity due to more evaporation from human body, while no significant difference in thermal sensation and humidity sensation among 4 relative humidity levels was obtained. Subjective performance was found to be at the same level under all conditions. However, subjects reported to be more tired at 70%RH after humidity step change.     

Radical polymerization of (phenylethynyl)styrenes and characterization of poly(phenylethynyl)styrenes as a thermally curable material

Summary The radical polymerizations of 2-, 3-, and 4-(phenylethynyl)styrenes (1a–c) and the copolymerizations of 1a–c (M₁) with styrene (M₂) were carried out using AIBN as the initiator in toluene at 60°C. The number-average molecular weights (M _ns) were extremely low for poly(2-phenylethynylstyrene) (2a) and poly[(phenylethynyl)styrene-co-styrene] (3a), and increased in the order of 2a, 3a << 2b, 3b < 2c, 3c. Monomer reactivity ratios were determined as r ₁= 1.80 and r ₂= 0.51 for 1a, r ₁= 1.72 and r ₂= 0.53 for 1b, and r ₁= 3.17 and r ₂= 0.24 for 1c. Polymers 2a–c and 3a–c underwent an exothermic reaction at elevated temperature to form organic solvent-insoluble polymers. Although the decomposition of 2a was observed from 200°C, 2b and 2c exhibited a high heat-resistance property in both nitrogen and air atmospheres, in particular, 2b showed no significant weight loss below 450°C. Received: 28 January 1998/Accepted: 5 March 1998     

High-velocity fluidization of solid particles in a liquid-solid circulating fluidized bed system

Particulate and aggregative fluidizations in a liquid-solid circulating fluidized bed system are characterized by chaotic time series analysis of local voidage and heat transfer fluctuations in terms of the correlation dimension and Kolmogorov entropy. Both correlation dimension and Komogorov entropy of the voidate fluctuation are found to decrease with decreasing bed voidage in both fluidization regimes, suggesting the suppression of chaotic motion of individual particles due to high solid concentration. The correlation dimension of the heat transfer fluctation in the aggregative fluidization regime is higher than that in the particulate fluidization regime. This reflects the complex convective motion of liquid and solid phases induced by the formation of the liquid streaks and aggregates of particles.     

An associative memory model derived from cross-coupled Hopfield nets and its role in noise-space dynamics

In this paper, the association characteristics of cross-coupled Hopfield nets (CCHN) proposed as a modular neural network model are discussed analytically. In a CCHN, an arbitrary number of modules (Hopfield networks) can be mutually connected via feedforward networks called internetworks, whose output generates interactions among module networks. To evaluate the CCHN as a modular neural network, it has previously been applied to associative memory. Although its excellent association performance is supported by many simulation results, it is still difficult to compute the memory capacity exactly or to examine the dynamic properties rigorously, because CCHN information processing includes strong nonlinearity. Hence, as the first step to an analytical approach, this paper focuses on a single-module CCHN whose interaction is realized by a two-layered feedforward internetwork. In this case, the connection matrix of the CCHN degenerates into a single square-matrix, as does a conventional auto-association type of associative memory. Using eigenvalue analysis for the connection matrix, we reveal that the essential differences between the association characteristics of a CCHN and a conventional autocorrelation associative memory originate from dynamics in the noise-space that is the orthogonal complement of the subspace generated from memory patterns. ©1998 Scripta Technica, Electr Eng Jpn, 125(2): 27–34, 1998     

Dietary intake of dioxins in Japan in 2016 with time trends since 1998

Total diet samples collected from seven regions throughout Japan in 2016 were analysed for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls (DL-PCBs), known collectively as dioxins. This led to estimates of the latest dietary intake of these contaminants for the general Japanese population (≥1 year old). The average daily intake of dioxins for a person weighing 50 kg, calculated at non-detected congener concentrations assumed to be equal to zero, was estimated to be 0.54 pg TEQ (toxic equivalents) kg^?1 body weight (bw) day^?1. This value is well below the tolerable daily intake of 4 pg TEQ kg^?1 bw day^?1 for dioxins in Japan. The average intake was highest from fish and shellfish, followed by meat and eggs. The TEQ contribution of the fish and shellfish group to the total dietary TEQs was significant (89%). The DL-PCBs accounted for about 67% of the dioxin intake. The latest dioxin intake level was compared with previous estimates from total diet study results obtained annually since 1998 to determine the time trends in the dietary intake of dioxins in Japan. Overall, the average dioxin intake appeared to be decreasing gradually during the period of study. The previous average intakes of dioxins ranged from 0.58 to 1.9 pg TEQ kg^?1 bw day^?1. The latest average intake was the lowest since 1998 and was about one-third of the average intake in 1998. This decreasing trend in the dietary intake of dioxins was mainly influenced by the decreased dioxin intakes from two food groups, fish and shellfish, and meat and eggs.     

Amorphous nanosilicas induce consumptive coagulopathy after systemic exposure

We previously reported that well-dispersed amorphous nanosilicas with particle size 70 nm (nSP70) penetrate skin and produce systemic exposure after topical application. These findings underscore the need to examine biological effects after systemic exposure to nanosilicas. The present study was designed to examine the biological effects. BALB/c mice were intravenously injected with amorphous nanosilicas of sizes 70, 100, 300, 1000 nm and then assessed for survival, blood biochemistry, and coagulation. As a result, injection of nSP70 caused fatal toxicity, liver damage, and platelet depletion, suggesting that nSP70 caused consumptive coagulopathy. Additionally, nSP70 exerts procoagulant activity in vitro associated with an increase in specific surface area, which increases as diameter reduces. In contrast, nSP70-mediated procoagulant activity was absent in factor XII-deficient plasma. Collectively, we revealed that interaction between nSP70 and intrinsic coagulation factors such as factor XII, were deeply related to nSP70-induced harmful effects. In other words, it is suggested that if interaction between nSP70 and coagulation factors can be suppressed, nSP70-induced harmful effects may be avoided. These results would provide useful information for ensuring the safety of nanomaterials (NMs) and open new frontiers in biological fields by the use of NMs.     

Exergy recuperative CO2 gas separation in pre-combustion capture

The integrated coal gasification combined cycle (IGCC) can achieve higher power generation efficiency than conventional pulverized coal combustion power plants. However, a CO₂ capture process prevents improving power generation efficiency of IGCC, because CO₂ separation from gas mixtures requires huge amounts of energy. Therefore, in this study, we analyzed the CO₂ separation process in the pre-combustion capture process using a process simulator (PRO/II) in the steady state, and proposed a new process using a modularity based on self-heat recuperation (SHR) technology to decrease energy consumption. Pre-combustion capture was applied in the IGCC plant, which involved coal gasification and CO-shift conversion with CO₂ capture. The results show that the energy consumption for the CO₂ separation process using SHR was decreased by two-thirds. This means that the power generation efficiency can be improved by SHR compared with conventional IGCC with a CO₂ capture process.     

Breeding of high malate‐producing diploid sake yeast with a homozygous mutation in the VID24 gene

Malate is an important taste component of sake (a Japanese alcoholic beverage) that is produced by the yeast Saccharomyces cerevisiae during alcoholic fermentation. A variety of methods for generating high malate‐producing yeast strains have been developed to date. We recently reported that a high malate‐producing strain was isolated as a mutant sensitive to dimethyl succinate (DMS), and that a mutation in the vacuolar import and degradation protein (VID) 24 gene was responsible for high malate productivity and DMS sensitivity. In this work, the relationships between heterozygous and homozygous mutants of VID24 and malate productivity in diploid sake yeast were examined and a method was developed for breeding a higher malate‐producing strain. First a diploid yeast was generated with a homozygous VID24 mutation by genetic engineering. The homozygous integrants produced more malate during sake brewing and grew more slowly in DMS medium than wild‐type and heterozygous integrants. Thus, the genotype of the VID24 mutation influenced the level of malate production and sensitivity to DMS in diploid yeast. Then a homozygous mutant from a heterozygous mutant was obtained without genetic engineering by ultraviolet irradiation and culturing in DMS with nystatin enrichment. The non‐genetically modified sake yeast with a homozygous VID24 mutation exhibited a higher level of malate productivity than the parent heterozygous mutant strain. These findings provide a basis for controlling malate production in yeast, and thereby regulating malate levels in sake. Copyright © 2016 The Institute of Brewing & Distilling     

A novel experimental technique to determine the heat transfer coefficient between the bed and particles in a downer

A novel method for directly measuring the temperature history of mobile hot ferromagnetic particles (steel particles), substituting for reacting particles, in a binary-solid (reacting particles and inert particles) downflow is introduced. The temperature history of the hot steel particles can be obtained by measuring the temperature of the particles at different axial positions using magnetic fields that can separate the steel particles from other bed materials immediately and easily. Employing the magnetic marking method, magnetic sensors were used to detect the change in magnetic flux density in a given magnetic field, and the residence time of the steel particles was also measured. The cross-sectional averaged particle-to-bed heat transfer coefficients were calculated from the experimental results using simple heat balance equations. The measured temperature data have a relatively wide error range; however, the average temperature curves derived from the average particle-to-bed heat transfer coefficients agreed with the temperature plots. Therefore, the experimental method of this study is applicable to the measurement of the particle temperature in a binary-solid downflow. The results showed that there is strong correlation between the particle-to-bed heat transfer coefficients and normalized collision frequency under the laminar gas flow conditions.